journal article·2000-04

The energy-absorbing capacity of grid-domed textile composites

T.X. Yu, X.M. Tao, P. Xue

Composites Science and Technology· Volume 60· Issue 5
Publisher page

Abstract

This paper is concerned with the energy-absorption behaviour of cellular textile composites. Three grid-domed textile composites fabricated from knitted fabrics were studied under quasi-static compression and impact condition. In both cases, the energy-absorbing capacity of the samples was measured. Comparison was made between the grid-domed composites, a composite comprising a non-woven fabric preform, polyester and polyethylene foams. The grid-domed composites exhibiting plastic collapses showed high levels of optimum specific energy-absorbing capacity at higher pressure levels than those of polyester and polyethylene foams. In addition, increases in strain rate or relative density had a positive effect on the energy-absorption capacity. The major energy-absorption mechanism of the grid-domed composite samples was identified as the plastic collapse of both the spherical cap and the truncated conical shell. Accordingly, a three-stage theoretical model is proposed; and the prediction of the energy-absorbing capacity of these cellular textile composites is in good agreement with experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Textile materials and evaluations · Advanced Materials and Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Gibson · 1988
2. Mechanical behaviour of cellular solids
3. Mills NJ. Chapter 9. In: Hilyard NC, Cunningham A, editors. Low density cellular plastics, physical basis of behaviour. London: Chapman and Hall, 1994.
4. Elasto-plastic yield limits and deformation laws for transversely crushed honeycombs10.1016/0020-7403(88)90060-4 ↗
5. Dynamic crushing of elastoplastic cellular solids
6. Crashing analysis of metal honeycombs10.1016/0734-743X(83)90004-0 ↗
7. Structural plastic model for one-dimensional ring systems10.1016/0734-743X(83)90005-2 ↗
8. Lateral crushing in tightly packed arrays of thin walled metal tubes10.1016/0020-7403(86)90014-7 ↗
9. Microdynamics of crushing in cellular solids10.1115/1.3226029 ↗
10. Reid SR, Peng C, Ready TY. Dynamic uniaxial crushing and penetration of wood. In: Harding, J. editor. Mechanical properties of materials at high rates of strain. Inst. Phys. Conf. Series No. 102, Bristol, 1989, pp. 447–55.
11. Dynamic uniaxial crushing of wood10.1016/S0734-743X(97)00016-X ↗
12. A model analysis of the compressibility of fiber assemblies10.1177/004051759206201002 ↗
13. On the large deformation of a rigid-plastic spherical shell compressed by a rigid plate10.1115/1.3428276 ↗
14. Analysis of large plastic deformations in shell structures
15. Some problems in propagating plasticity