Crystallization of R-BAPB type polyimide modified by carbon nano-particles
Source abstract
Abstract
Abstract A new semicrystalline polyimide, based on 1,3-bis-(3,3′,4,4′-dicarboxyphenoxy)benzene (R) and 4,4′-bis-(4-aminophenoxy)biphenyl (BAPB), was modified by carbon nanotubes and other carbon type fillers. This R-BAPB type polyimide, with a molecular weight Mw = 30,000 g/mol has a low melting temperature of 320 °C and a melt viscosity of about 1000 Pa s at 340 °C that gives the possibility to mix it with carbon particles by using solvent- and melt-based mixing. This study, based on calorimetric and rheological measurements, presents the nucleating effect on the polyimide of four types of carbon fillers, namely, carbon nanotubes, vapor grown carbon fibers and regular and graphitized carbon black. The strongest nucleating effect is observed for fillers with highly ordered graphitic structure, for which the highest degree of crystallinity of the polyimide matrix can be regenerated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Synthesis and properties of polymers · Tribology and Wear Analysis · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Bessonov · 1987
2. Crystallization behavior and morphological features of LARC-CPI10.1016/0032-3861(93)90365-H ↗
3. Semicrystalline polyimides based on controlled molecular weight phthalimide end-capped 1,3-bis(4-aminophenoxy)benzene and 3,3′,4,4′-biphenyltetracarboxylic dianhydride: synthesis, crystallization, melting, and thermal stability10.1021/ma9604597 ↗
4. Thermal stability, crystallization kinetics and morphology of new semicrystalline polyimide based on 1,3-bis(4-aminophenoxy) benzene and 3,3′ ,4,4′-biphenyltetracarboxylic dianhydride10.1016/S0032-3861(00)00125-7 ↗
5. Semicrystalline polyimide matrices for composites: Crystalization and properties10.1002/app.10277 ↗
6. Yudin VE, Svetlichnyi VM, Gubanova GN, Didenko AL, Popova EN, Sukhanova TE, etal. Influence of crystallinity of R-BAPB type polyimide matrix on thermal and mechanical properties of carbon fiber reinforced composites. In: Mittal KL, editor. In the book “Polyimides and other high temperature polymers” vol. 3. 2005. p. 229.10.1201/b12194-19 ↗
7. The nucleating effect of carbon nanotubes on crystallinity in R-BAPB-type thermoplastic polyimide10.1002/marc.200500085 ↗
8. Nucleation ability of multiwall carbon nanotubes in polypropylene composites10.1002/polb.10394 ↗
9. The morphology and thermal properties of multi-walled carbon nanotube and poly(hydroxybutyrate-co-hydroxyvalerate) composite10.1002/pi.1566 ↗
10. Crystallization and orientation studies in polypropylene/single wall carbon nanotube composite10.1016/S0032-3861(03)00073-9 ↗
11. Crystallization of carbon nanotube and nanofiber polypropylene composites10.1081/MB-120021576 ↗
12. Carbon-nanotube nucleated crystallinity in a conjugated polymer based composites10.1016/j.cplett.2004.05.025 ↗
13. High-performance nanotube-reinforced plastics: understanding the mechanism of strength increase10.1002/adfm.200305200 ↗
14. Polycarbonate crystallization by vapor-grown carbon fiber with and without magnetic field10.1002/marc.200350021 ↗
15. Influence of melt stability on the crystallization of bis(4-aminophenoxy)benzene-oxydiphthalic anhydride based polyimides10.1002/pen.10589 ↗
16. Polym Sci
17. Polym Sci
18. Oriented crystallization by vapor grown carbon fibers and its application10.1295/polymj.37.887 ↗
19. Transcrystallinity in polycarbonate-carbon fibre microcomposites: the key to the mechanical role of the interphase10.1007/BF00455432 ↗