Insight into the effect of interface on the mechanical properties of Mg/PLA composite plates
Source abstract
Abstract
Abstract Micro-arc oxidation (MAO) is used for interface modification of biodegradable poly(lactic acid) (PLA) based composite reinforced with magnesium alloy sheets (MASs/PLA). The intermolecular force and strong mechanical interlocking between the MgO and PLA play a significant role in the interface strengthening. Tensile-shear tests reveal 3 times improvement of the interface tensile-shear strength after MAO treatment of MASs, thereby leading to the enhanced macroscopic properties of the composite plate. Investigations based on the lamination theory suggest the tensile stress of PLA on the bottom of composite plate can be improved from 38 MPa to 47 MPa by interfacial constraint strengthening derived from MAO. The experimental and theoretical analysis of mechanical properties of the Mg/PLA composites is useful for further optimizing their preparation technology.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: biodegradable polymer synthesis and properties · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants10.1016/j.biomaterials.2009.11.111 ↗
2. Biodegradable poly(lactide-co-glycolide) coatings on magnesium alloys for orthopedic applications10.1007/s10856-012-4773-5 ↗
3. A layer-by-layer approach to natural polymer-derived bioactive coatings on magnesium alloys10.1016/j.actbio.2013.05.013 ↗
4. Influence of surface modification on the in vitro corrosion rate of magnesium alloy AZ3110.1002/jbm.a.32205 ↗
5. In vitro degradation of biodegradable polymer-coated magnesium under cell culture condition10.1016/j.apsusc.2012.03.036 ↗
6. Fabrication and evaluation of bioresorbable PLLA/magnesium and PLLA/magnesium fluoride hybrid composites for orthopedic implants10.1016/j.compscitech.2014.04.011 ↗
7. In vitro study on biodegradable AZ31 magnesium alloy fibers reinforced PLGA composite10.1016/j.jmst.2013.03.004 ↗
8. A review on interface modification and characterization of natural fiber reinforced plastic composites10.1002/pen.10846 ↗
9. Engineering and characterisation of the interface in flax fibre/polypropylene composite materials, Part II. The effect of surface treatments on the interface10.1016/S1359-835X(02)00088-X ↗
10. Interface modification and mechanical properties of natural fiber-polyolefin composite products10.1177/0731684405041717 ↗
11. Mg alloy rod reinforced biodegradable poly-lactic acid composite for load bearing bone replacement10.1016/j.surfcoat.2016.12.005 ↗
12. Enhanced fully-biodegradable Mg/PLA composite rod: effect of surface modification of Mg-2Zn wire on the interfacial bonding10.1016/j.surfcoat.2018.07.045 ↗
13. Controlled degradation of a magnesium alloy in simulated body fluid using hydrofluoric acid treatment followed by polyacrylonitrile coating10.1016/j.corsci.2012.04.041 ↗
14. Electrochemical corrosion behavior of composite MAO/sol–gel coatings on magnesium alloy AZ91D using combined micro-arc oxidation and sol–gel technique10.1016/j.jallcom.2008.06.135 ↗
15. Effect of alumina sol addition to micro-arc oxidation electrolyte on the properties of MAO coatings formed on magnesium alloy AZ91D10.1016/j.jallcom.2010.02.098 ↗
16. Biodegradable poly-lactic acid based-composite reinforced unidirectionally with high-strength magnesium alloy wires10.1016/j.biomaterials.2015.01.060 ↗
17. Impact behaviors of poly-lactic acid based biocomposite reinforced with unidirectional high-strength magnesium alloy wires10.1016/j.pnsc.2014.08.003 ↗
18. Fabrication and degradation behavior of micro-arc oxidized biomedical magnesium alloy wires10.1016/j.surfcoat.2012.10.078 ↗
19. In vitro corrosion and cytocompatibility of a microarc oxidation coating and poly(L-lactic acid) composite coating on Mg-1Li-1Ca alloy for orthopedic implants10.1021/acsami.6b00527 ↗
20. Fluoride conversion coating on biodegradable AZ31B magnesium alloy10.1016/j.jmst.2013.12.015 ↗
21. Preparation and characterization of PLA coating and PLA/MAO composite coatings on AZ31 magnesium alloy for improvement of corrosion resistance10.1016/j.surfcoat.2014.11.069 ↗
22. Ebewele · 2010
23. The effects of heat-setting on the properties of polyester/viscose blended yarns
24. Tetracarboxylic acids as formaldehyde-free durable press finishing agents: Part I: catalyst, additive, and durability studies10.1177/004051758805800809 ↗
25. Molecular understanding of the adhesive force between a metal oxide surface and an epoxy resin10.1021/jp202785b ↗
26. Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating10.1016/j.colsurfb.2011.12.009 ↗
27. Characterization and corrosion studies of fluoride conversion coating on degradable Mg implants10.1016/j.surfcoat.2007.06.035 ↗
28. Study on the interface of PVDF coatings and HF-treated AZ31 magnesium alloy: determination of interfacial interactions and reactions with self-healing properties10.1016/j.corsci.2010.11.001 ↗