Porous conductive elastomeric composites with carbon nanotubes suspended in the narrow pores from Co-continuous polymer blend nanocomposites
Source abstract
Abstract
Abstract Porous conductive poly(ethylene-co-octene) (POE) elastomeric composites have been fabricated by selectively etching of the poly(butylene adipate-co-terephthalate) (PBAT) phase from the co-continuous POE/PBAT/carbon nanotubes (CNTs) ternary nanocomposites in which CNTs are exclusively located in the PBAT phase. The CNTs were fully left and suspended in the narrow pores with the solvent etching of PBAT by the dichloromethane. The obtained porous composites are light weight, flexible, and elastic. Moreover, the conductivity of the porous elastic composites is 11 orders of magnitude higher than that of the ternary nanocomposites with 2.0 wt% CNTs. In addition, the fully exposure of the CNTs in the pores induces the significantly increased electromagnetic interference shielding effects. The formation of porous conductive elastomers paves new possibility to fabricate functional materials for flexible electronics.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Dielectric materials and actuators · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. An application‐oriented roadmap to select polymeric nanocomposites for advanced applications: a review10.1002/pc.25461 ↗
2. Bioinspired design of flexible strain sensor with high performance based on gradient filler distributions10.1016/j.compscitech.2020.108319 ↗
3. Electrical conductivity behaviour of sheared poly(methyl methacrylate)/carbon black composites10.1016/j.compscitech.2014.06.005 ↗
4. Insights to low electrical percolation thresholds of carbon-based polypropylene nanocomposites10.1016/j.carbon.2021.01.158 ↗
5. Tune the phase morphology to design conductive polymer composites: a review10.1002/pc.24345 ↗
6. Conductive polymer composites with segregated structures10.1016/j.progpolymsci.2014.07.007 ↗
7. Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black10.1007/BF00310802 ↗
8. Design of electrical conductive composites: tuning the morphology to improve the electrical properties of graphene filled immiscible polymer blends10.1021/am301230q ↗
9. Balance the electrical properties and mechanical properties of carbon black filled immiscible polymer blends with a double percolation structure10.1016/j.compscitech.2016.12.029 ↗
10. A review of porous lightweight composite materials for electromagnetic interference shielding10.1016/j.compositesb.2018.05.027 ↗
11. Heterogeneous silicon rubber composite foam with gradient porous structure for highly absorbed ultra-efficient electromagnetic interference shielding10.1016/j.compscitech.2021.108663 ↗
12. Tough graphene-polymer microcellular foams for electromagnetic interference shielding10.1021/am200021v ↗
13. Lightweight and conductive carbon black/chlorinated poly(propylene carbonate) foams with a remarkable negative temperature coefficient effect of resistance for temperature sensor applications10.1039/C8TC02123F ↗
14. Lightweight multifunctional polypropylene/carbon nanotubes/carbon black nanocomposite foams with segregated structure, ultralow percolation threshold and enhanced electromagnetic interference shielding performance10.1016/j.compscitech.2020.108116 ↗
15. Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications10.1039/C8TC01326H ↗
16. Flexible and wearable carbon black/thermoplastic polyurethane foam with a pinnate-veined aligned porous structure for multifunctional piezoresistive sensors10.1016/j.cej.2019.122985 ↗
17. Flexible and lightweight pressure sensor based on carbon nanotube/thermoplastic polyurethane-aligned conductive foam with superior compressibility and stability10.1021/acsami.7b16975 ↗
18. Three-dimensional light-weight piezoresistive sensors based on conductive polyurethane sponges coated with hybrid CNT/CB nanoparticles10.1016/j.apsusc.2021.149268 ↗
19. A promising strategy for efficient electromagnetic interference shielding by designing a porous double-percolated structure in MWCNT/polymer-based composites10.1016/j.compositesa.2020.106059 ↗
20. Efficient electrical conductivity and electromagnetic interference shielding performance of double percolated polymer composite foams by phase coarsening in supercritical CO210.1016/j.compscitech.2021.108895 ↗
21. In situ formation of 2D conductive porous material with ultra low percolation threshold10.1016/j.matlet.2012.05.050 ↗
22. 3D network porous polymeric composites with outstanding electromagnetic interference shielding10.1016/j.compscitech.2016.01.007 ↗
23. Advances in responsively conductive polymer composites and sensing applications10.1080/15583724.2020.1734818 ↗
24. Recent advances of conductive nanocomposites in printed and flexible electronics10.1088/1361-665X/aa7373 ↗
25. Electrically conductive polymer composites for smart flexible strain sensors: a critical review10.1039/C8TC04079F ↗
26. Conductive elastomers for stretchable electronics, sensors and energy harvesters10.3390/polym8040123 ↗
27. High-performance stretchable conductive nanocomposites: materials, processes, and device applications10.1039/C8CS00706C ↗
28. Elastomer composites with a tailored interface network toward tunable piezoresistivity: effect of elastomer particle size10.1021/acsapm.8b00241 ↗
29. Highly stretchable and sensitive strain sensor with porous segregated conductive network10.1021/acsami.9b12504 ↗
30. Highly stretchable electromagnetic interference (EMI) shielding segregated polyurethane/carbon nanotube composites fabricated by microwave selective sintering10.1039/C9TC02311A ↗
31. Flexible conductive composite integrated with personal earphone for wireless, real-time monitoring of electrophysiological signs10.1021/acsami.8b06484 ↗
32. The effect of filler dimensionality on the electromechanical performance of polydimethylsiloxane based conductive nanocomposites for flexible strain sensors10.1016/j.compscitech.2016.12.014 ↗
33. Carbon nanotubes induced microstructure and property changes of polycarbonate/poly(butylene terephthalate) blend10.1016/j.compositesb.2017.09.037 ↗
34. Selective localization of multiwalled carbon nanotubes in poly(ε-caprolactone)/polylactide blend10.1021/bm801183f ↗
35. Morphology evolution to form double percolation polylactide/polycaprolactone/MWCNTs nanocomposites with ultralow percolation threshold and excellent EMI shielding10.1016/j.compscitech.2021.108956 ↗
36. Achieving outstanding mechanical performance in reinforced elastomeric composite fibers using large sheets of graphene oxide10.1002/adfm.201402167 ↗
37. Carbon nanotube–reinforced polymer composite for electromagnetic interference application: a review10.1515/ntrev-2020-0064 ↗
38. Conducting polymer based composites as efficient EMI shielding materials: a comprehensive review and future prospects10.1016/j.synthmet.2020.116664 ↗
39. New electromagnetic wave shielding effectiveness at microwave frequency of polyvinyl chloride reinforced graphite/copper nanoparticles10.1016/j.compositesa.2010.08.006 ↗
40. Recent advances in electromagnetic interference shielding properties of metal and carbon filler reinforced flexible polymer composites: a review10.1016/j.compositesa.2018.08.006 ↗
41. Oxidized multiwall carbon nanotube/silicone foam composites with effective electromagnetic interference shielding and high gamma radiation stability10.1039/C8RA03314E ↗