journal article·2017-10

Experimental investigation of the thermoresistive response of multiwall carbon nanotube/polysulfone composites under heating-cooling cycles

M. Cen-Puc, G. Pool, A.I. Oliva-Avilés, A. May-Pat, F. Avilés

Publisher page

Abstract

Abstract The thermoresistive behavior of multiwall carbon nanotube (MWCNT)/polysulfone composites is experimentally investigated under heating-cooling cycles. Composites with MWCNT weight concentrations between 0.5 and 50 wt.% were fabricated and their morphology and porosity were examined. Changes in their electrical resistance upon changes in temperature were simultaneously measured under heating-cooling cycles above and below room temperature (25 °C), and under incremental steps of constant temperature. The thermoresistive sensitivity (temperature coefficient of resistance, TCR) and the hysteresis of each heating-cooling cycle were also investigated. Composites with MWCNT concentrations of 25 wt.% and below showed a positive TCR, while negative ones were measured for composites with 40 wt.% and 50 wt.%. The thermoresistive hysteresis was higher for composites with high MWCNT content (40 wt.% and 50 wt.%). Higher TCRs were found for temperatures above room temperature than below, and dominance of the MWCNT inherent thermoresistivity was observed for composites with very high MWCNT content (≥40 wt.%). Finally, the potential of this material to perform as a thermistor was assessed by comparing its readings to those of a commercial (solid state) sensor, showing very high sensitivity, good reproducibility and fair agreement with the commercial sensor.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Jorio · 2008
2. Sensors and actuators based on carbon nanotubes and their composites: a review10.1016/j.compscitech.2008.01.006 ↗
3. Carbon nanotube networks: sensing of distributed strain and damage for life prediction and self healing10.1002/adma.200600977 ↗
4. Introduction to carbon nanotube and nanofiber smart materials10.1016/j.compositesb.2006.02.011 ↗
5. Electrical conductivity of individual carbon nanotubes10.1038/382054a0 ↗
6. Quantum transport in a multiwalled carbon nanotube10.1103/PhysRevLett.76.479 ↗
7. Determination of electron orbital magnetic moments in carbon nanotubes10.1038/nature02425 ↗
8. Linear specific heat of carbon nanotubes10.1103/PhysRevB.59.R9015 ↗
9. Dielectrophoretic batch fabrication of bundled carbon nanotube thermal sensors10.1109/TNANO.2004.834156 ↗
10. Carbon nanotubes film based temperature sensors10.1016/j.physe.2011.05.025 ↗
11. Flexible temperature sensors on fibers10.3390/s100907934 ↗
12. Pressure and temperature induced electrical resistance change in nano-carbon/epoxy composites10.1016/j.compscitech.2015.04.016 ↗
13. Fluctuation-induced tunneling conduction in disordered materials10.1103/PhysRevB.21.2180 ↗
14. Tunnel junctions in a polymer composite10.1063/1.360012 ↗
15. Fluctuation-induced tunneling conduction in carbon-polyvinylchloride composites10.1103/PhysRevLett.40.1197 ↗
16. Fluctuation-induced tunneling conduction through nanoconstrictions10.1103/PhysRevB.79.165419 ↗
17. Temperature dependent electrical conductivity of CNT–PEEK composites10.1016/j.compscitech.2011.08.018 ↗
18. A temperature sensor based on a MWCNT/SEBS nanocomposite10.1016/j.sna.2012.02.043 ↗
19. Positive temperature coefficient thermistors based on carbon nanotube/polymer composites10.1038/srep06684 ↗
20. Resistivity–temperature characteristics of filler-dispersed polymer composites10.1016/j.polymer.2012.10.046 ↗
21. In situ thermoresistive characterization of multifunctional composites of carbon nanotubes10.1016/j.polymer.2012.09.022 ↗
22. Strain sensing capabilities of a piezoresistive MWCNT-polysulfone film10.1016/j.sna.2010.03.005 ↗
23. Solvay · 2015
24. Cheaptubes Inc · 2015
25. Influence of carbon nanotube on the piezoresistive behavior of multiwall carbon nanotube/polymer composites10.1177/1045389X14560367 ↗
26. ASTM D2734 · 1994
27. Determination of carbon nanotube density by gradient sedimentation10.1021/jp063660k ↗
28. A dedicated electric oven for characterization of thermoresistive polymer nanocomposites10.1016/j.jart.2016.06.004 ↗
29. Temperature-compensated force/pressure sensor based on multi-walled carbon nanotube epoxy composites10.3390/s150511133 ↗
30. Painter · 2009
31. Rosen · 1993
32. Molecular-level modeling and experimental investigation into the high performance nature and low hysteresis of thermoplastic polyurethane/multi-walled carbon nanotube nanocomposites10.1016/j.polymer.2012.10.041 ↗
33. Influence of rigid segment and carbon nanotube concentration on the cyclic piezoresistive and hysteretic behavior of multiwall carbon nanotube/segmented polyurethane composites10.1016/j.compscitech.2016.03.010 ↗
34. Thermal volume expansion in polymeric PTC composites: a theoretical approach10.1016/S0266-3538(00)00191-3 ↗
35. Temperature-dependent resistivity and conduction mechanism in carbon particle-filled polymers10.1007/BF01142046 ↗
36. Study of the volume fraction, temperature, and pressure dependence of the resistivity in a ceramic-polymer composite using a general effective media theory equation10.1007/BF01130131 ↗
37. Percolation behaviour of ultrahigh molecular weight polyethylene/multi-walled carbon nanotubes composites10.1016/j.eurpolymj.2006.12.015 ↗
38. Design, fabrication, and characterization of three-dimensional single-walled carbon nanotube assembly and applications as thermal sensors10.1109/TNANO.2010.2101080 ↗
39. Thermal transport in MWCNT sheets and yarns10.1016/j.carbon.2007.10.010 ↗
40. Temperature dependence of the conductance of multiwalled carbon nanotubes10.1103/PhysRevB.64.125407 ↗
41. Thermal and electrical conductivity of tall, vertically aligned carbon nanotube arrays10.1016/j.carbon.2010.06.063 ↗