Photosensitive hybrid polysilsesquioxanes for etching-free processing of flexible copper clad laminate
Source abstract
Abstract
Abstract A photosensitive ladder-structured polysilsesquioxane was synthesized for the development of flexible copper clad laminates through electroless plating of Cu. The developed ladder-structured polysilsesquioxane with controlled structure enabled easy introduction of protected thiol and allyl functional group, which under acidic conditions, the thiol group becomes deprotected. This deprotected thiol group enables UV-initiated thiol-ene curing of the exposed regions, while the unexposed regions containing free thiol groups act as seed initiators for Cu electroless plating, and the corresponding negative pattern fabrication process also possible. Through this facile method, we were able to develop flexible copper clad laminates of tunable Cu interconnect width size of high electrical conductivity according to photomask pattern and the insulating dielectric surrounding layer exhibiting low dielectric constant and low loss behavior without any corrosive Cu etching steps.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicone and Siloxane Chemistry · Synthesis and properties of polymers · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Industrial IoT in 5G environment towards smart manufacturing
2. A survey on 5G networks for the internet of things: communication technologies and challenges10.1109/ACCESS.2017.2779844 ↗
3. Propagation characteristics of indoor radio channel from 3.5 GHz to 28 GHz, 2016 IEEE 84th Veh
4. Design and analysis of a slotted microstrip antenna for 5G communication networks at 28 GHz, 19th
5. Innovative packaging solutions of 3D system in package with antenna integration for IoT and 5G application, 2018 IEEE 20th Electron
6. Enabling simultaneous extreme ultra low-k in stiff, resilient, and thermally stable nano-architected materials10.1021/acs.nanolett.7b03941 ↗
7. Effect of conductor surface roughness upon measured loss and extracted values of PCB laminate material dissipation factor
8. Liew · 2014
9. Impact of copper surface texture on loss: a model that works
10. Advanced package wiring technology solution for heterogeneous integration, 2019 Pan pacific microelectron
11. Forecasting analysis for global copper clad laminate market
12. Virtual metrology for copper-clad laminate manufacturing10.1016/j.cie.2017.04.016 ↗
13. An approach to develop high-Tg epoxy resins for halogen-free copper clad laminates10.1016/j.polymer.2009.09.075 ↗
14. Low transmission loss flexible substrates using low Dk/Df polyimide adhesives
15. Temperature stable low loss PTFE/rutile composites using secondary polymer10.1007/s00339-010-6088-z ↗
16. Embedded components in printed circuit boards: a processing technology review10.1007/s00170-003-1872-y ↗
17. Preparation of surface bound silver nanoparticles on polyimide by surface modification method and its application on electroless metal deposition10.1016/j.apsusc.2004.03.235 ↗
18. Fabrication of electrodes and near-field communication tags based on screen printing of silver seed patterns and copper electroless plating10.1007/s12541-015-0283-y ↗
19. Electroless copper plating on 3-mercaptopropyltriethoxysilane modified PET fabric challenged by ultrasonic washing10.1016/j.apsusc.2009.05.148 ↗
20. Preparation of selective conductive copper patterns by pen-on-paper writing combined with electroless plating10.1007/s10854-016-4701-4 ↗
21. Covalent binding of Pd catalysts to ligating self-assembled monolayer films for selective electroless metal deposition10.1149/1.2054686 ↗
22. Baney · Silsesquioxanes, Chem. Rev. · 1995 · 95 · 140910.1021/cr00037a012 ↗
23. Robust spin-on-glass poly(methyl)silsesquioxane-based low-k materials derived from a cyclic siloxane precursor10.1039/C5RA11110B ↗
24. Functional polyimide/polyhedral oligomeric silsesquioxane nanocomposites10.3390/polym11010026 ↗
25. Fluorinated polyimide with polyhedral oligomeric silsesquioxane aggregates: toward low dielectric constant and high toughness10.1016/j.compscitech.2019.107700 ↗
26. Fluoride ion encapsulated polyhedral oligomeric silsesquioxane: a novel filler for polymer nanocomposites with enhanced dielectric constant and reduced dielectric loss10.1016/j.compscitech.2020.108035 ↗
27. Functional silica and carbon nanocomposites based on polybenzoxazines10.1002/macp.201800306 ↗
28. Structural control of fully condensed polysilsesquioxanes: ladderlike vs cage structured polyphenylsilsesquioxanes10.1021/acs.macromol.5b01539 ↗
29. Free-standing, polysilsesquioxane-based inorganic/organic hybrid membranes for gas separations10.1016/j.memsci.2014.10.024 ↗
30. Side-chain engineering of ladder-structured polysilsesquioxane membranes for gas separations10.1016/j.memsci.2016.06.016 ↗
31. Thiol-ene “click” reactions and recent applications in polymer and materials synthesis10.1039/B9PY00216B ↗
32. Protection of hydroxyl groups as tert-butyldimethylsilyl derivatives10.1021/ja00772a043 ↗
33. Using DMF as both a catalyst and cosolvent for the regioselective silylation of polyols and diols10.1002/ejoc.201901195 ↗
34. Protection and polymerization of functional monomers. 20. Anionic polymerizations of 4-vinylphenyl tert-butyldimethylsilyl sulfide and 2-(4-vinylphenyl)ethyl tert-butyldimethylsilyl sulfide10.1021/ma00085a026 ↗
35. Photochemicaly removable silyl protecting groups10.1021/ja002370t ↗
36. Thiol-allyl ether-methacrylate ternary systems. Polymerization mechanism10.1021/ma062494b ↗
37. Mechanical properties of thiol-ene UV-curable thermoplastic polysilsesquioxanes10.1016/j.polymer.2015.05.007 ↗
38. Rational molecular design of PEOlated ladder-structured polysilsesquioxane membranes for high performance CO2 removal10.1039/C5CC06269A ↗
39. Incompletely condensed POSS-based spin-on-glass networks for impeccable ultra low-k integration10.1039/C5TC02683K ↗
40. Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation10.1016/j.tca.2005.10.006 ↗
41. Ultralow-k nanoporous organosilicate dielectric films imprinted with dendritic spheres10.1038/nmat1291 ↗
42. Low-κ nanocomposite films based on polyimides with grafted polyhedral oligomeric silsesquioxane10.1002/app.22515 ↗
43. Review of polymer materials with low dielectric constant10.1002/pi.2809 ↗
44. Evolution of microstructure and electrical conductivity of electroless copper deposits on a glass substrate10.1016/j.tsf.2012.05.068 ↗