Characterization of non-covalently, non-specifically functionalized multi-wall carbon nanotubes and their melt compounded composites with an ethylene–octene copolymer
Source abstract
Abstract
Abstract Multi-wall carbon nanotubes (MWCNTs) were functionalized with a hyperbranched polyethylene (HBPE) using a non-covalent, non-specific functionalization approach. The adsorption behavior of HBPE on MWCNTs was characterized by means of an adsorption isotherm. HBPE adsorption reached a plateau value of 0.3:1.0 (w/w) HBPE:MWCNT, corresponding to a surface coverage of approximately 30%. The functionalized MWCNTs were better dispersed in tetrahydrofuran (THF), forming smaller aggregates compared to their unmodified counterparts. Pristine and HBPE-functionalized MWCNTs were melt compounded with a low-viscosity ethylene–octene copolymer (EOC) matrix. Electrical and rheological percolation thresholds were observed at nanotube loadings of less than 1 wt%. Functionalization did not affect significantly the electrical conductivity and rheological properties. The improved dispersion of the functionalized MWCNTs within the EOC matrix resulted in improved ductility over the non-functionalized counterpart. This study demonstrates that this method of functionalization results in partial surface coverage of the nanotubes, therefore providing an efficient means for achieving good nanotube dispersion, without compromising their surface properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Conducting polymers and applications · Polymer crystallization and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Rheological behavior of multiwalled carbon nanotube/polycarbonate composites10.1016/S0032-3861(02)00151-9 ↗
2. Rheological and dielectrical characterization of melt mixed polycarbonate-multiwalled carbon nanotube composites10.1016/j.polymer.2004.10.040 ↗
3. Rheological characterization of melt processed polycarbonate-multiwalled carbon nanotube composites10.1016/j.jnnfm.2005.01.008 ↗
4. Dynamic mechanical and morphological properties of polycarbonate/multi-walled carbon nanotube composites10.1016/j.polymer.2005.04.075 ↗
5. WA. fabrication and characterization of carbon nanotube/poly(vinyl alcohol) composites10.1002/(SICI)1521-4095(199908)11:11<937::AID-ADMA937>3.0.CO;2-9 ↗
6. Synthesis, structure, and properties of PBO/SWNT composites10.1021/ma0205055 ↗
7. Iijima S. Helical microtubules of graphitic carbon. 1991; 354(56).10.1038/354056a0 ↗
8. The revolutionary creation of new advanced materials—carbon nanotube composites10.1016/S1359-8368(02)00012-4 ↗
9. Polymer nanocomposites containing carbon nanotubes10.1021/ma060733p ↗
10. The influence of matrix viscosity on MWCNT dispersion and electrical properties in different thermoplastic nanocomposites10.1016/j.polymer.2011.12.019 ↗
11. Establishment, morphology and properties of carbon nanotube networks in polymer melts10.1016/j.polymer.2011.10.063 ↗
12. Rutkofsky M, Banash M, Rajagopal R, Chen J. Using a carbon nanotube additive to make electrically conductive commercial polymer composites. Zyvex Application Note 9709 2006.
13. Chemistry of single-walled carbon nanotubes10.1021/ar010155r ↗
14. Effect of carbon nanotube functionalization on the structural and mechanical properties of polypropylene/MWCNT composites10.1021/ma801599q ↗
15. Band gap fluorescence from individual single-walled carbon nanotubes10.1126/science.1072631 ↗
16. Production of aqueous colloidal dispersions of carbon nanotubes10.1016/S0021-9797(02)00176-5 ↗
17. Functionalization of multi-walled carbon nanotubes with poly(2-ethyl-2-oxazoline)10.1002/masy.200750344 ↗
18. Noncovalent nonspecific functionalization and solubilization of multi-walled carbon nanotubes at high concentrations with a hyperbranched polyethylene10.1002/macp.200900460 ↗
19. Non-covalent/non-specific functionalization of multi-walled carbon nanotubes with a hyperbranched polyethylene and characterization of their dispersion in a polyolefin matrix10.1016/j.carbon.2011.04.001 ↗
20. Reporting physisorption data for gas–solid systems10.1351/pac198557040603 ↗
21. Nitrogen adsorption characterization of aligned multiwalled carbon nanotubes and their acid modification10.1016/j.jcis.2004.05.024 ↗
22. Hyperbranched polyethylenes and functionalized polymers by chain walking polymerization with Pd-diimine catalysis10.1002/mren.200900068 ↗
23. Electrical properties of single walled carbon nanotube reinforced polystyrene composites10.1002/masy.200750120 ↗
24. Nanotube networks in polymer nanocomposites: rheology and electrical conductivity10.1021/ma049164g ↗
25. Polyethylene multiwalled carbon nanotube composites10.1016/j.polymer.2005.06.094 ↗
26. Hu G, Zhao C, Zhang S, Yang M, Wang Z. Low percolation thresholds of electrical conductivity and rheology in poly(ethylene terephthalate) through the networks of multi walled carbon nanotubes. 2006; 47: 480–88.10.1016/j.polymer.2005.11.028 ↗
27. Formation of percolating networks in multi-wall carbon-nanotube–epoxy composites10.1016/j.compscitech.2004.01.025 ↗
28. Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites10.1016/S0032-3861(03)00539-1 ↗
29. Preparation of conductive nanotube–polymer composites using latex technology10.1002/adma.200305728 ↗
30. An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blends10.1016/j.compositesa.2007.10.010 ↗
31. Rheological properties and percolation in suspensions of multiwalled carbon nanotubes in polycarbonate10.1007/s00397-009-0375-7 ↗
32. Theory of filler reinforcement10.1063/1.1707495 ↗
33. Single-walled carbon nanotube dispersions in poly(ethylene oxide)10.1002/adfm.200500290 ↗
34. Structure optimization in colloidal reinforcing fillers: precipitated silica10.5254/1.3547683 ↗