Tensile properties and damage behaviors of Csf/Mg composite at elevated temperature and containing a small fraction of liquid
Source abstract
Abstract
Abstract The mechanical properties of magnesium matrix composites reinforced by pyrolytic carbon coated short carbon fiber at temperatures close to and above the solidus temperature were investigated by tensile tests for the first time. Microstructural observations and fractographic analysis were carried out in order to reveal the damage mechanisms of the composites with different fraction of liquid. Tensile strength of the composites decreased monotonously with temperature, an exponential equation relating the tensile strength to temperature and liquid fraction was derived. The elongation increases monotonously with temperatures from 400 °C to 428 °C (solidus temperature), and then decreases gradually with increasing fraction of liquid except a trough at 432 °C. The composites almost have no ductility and cannot sustain tensile stress when the fraction of liquid reaches 8%. The amount and distribution of liquid phase in the composites directly determines their mechanical properties and damage behavior.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Kainer · 2006
2. Mechanical behaviour of Al-matrix composite wires in double composite structures10.4028/www.scientific.net/AST.50.147 ↗
3. Production and investigation of a metal matrix composite pipe
4. Evolution of interfacial nanostructures and stress states in Mg matrix composites reinforced with coated continuous carbon fibers10.1016/j.compscitech.2011.10.008 ↗
5. Microstructural analysis of a carbon fibre reinforced AZ91D magnesium alloy composite10.1002/sia.2026 ↗
6. Compressive behavior of Csf/AZ91D composites by liquid–solid extrusion directly following vacuum infiltration technique10.1016/j.msea.2011.10.051 ↗
7. Constitutive behavior of Csf/AZ91D composites compressed at elevated temperature and containing a small fraction of liquid10.1016/j.compscitech.2011.02.011 ↗
8. Thixoforming of spray formed 6066Al/SiCp composites10.1016/S0266-3538(01)00013-6 ↗
9. Hot deformation behaviors of Bi2O3-coated Al18B4O33 whisker reinforced aluminum matrix composite with high formability10.1016/j.compscitech.2006.06.009 ↗
10. Microstructure evolution and mechanical properties of Al2O3sf/AZ91D magnesium matrix composites fabricated by squeeze casting10.1007/s10853-010-4367-x ↗
11. Fabrication of Csf/Mg composites using extrusion directly following vacuum infiltration-Part 2: forming process study10.4028/www.scientific.net/SSP.141-143.91 ↗
12. Damage prediction for magnesium matrix composites formed by liquid-solid extrusion process based on finite element simulation10.1016/S1003-6326(09)60367-8 ↗
13. 3D FE analysis on the product defects of composites formed by liquid–solid extrusion process10.1016/j.jmatprotec.2008.04.070 ↗
14. Tensile properties of as-cast aluminum alloys AA3104, AA6111 and CA31218 at above solidus temperatures10.1016/j.msea.2008.07.027 ↗
15. X-ray micro-tomographic observations of hot tear damage in an Al–Mg commercial alloy10.1016/j.scriptamat.2006.03.035 ↗
16. A new methodology for measurement of semi-solid constitutive behavior and its application to examination of as-cast porosity and hot tearing in aluminum alloys10.1016/j.msea.2008.01.078 ↗
17. Tensile properties of as-deformed 2A50 aluminum alloy in semi-solid state10.1016/S1003-6326(09)60345-9 ↗
18. Constitutive behavior of as-cast magnesium alloy Mg–Al3–Zn1 in the semi-solid state10.1016/j.scriptamat.2008.11.011 ↗
19. The semi-solid tensile deformation behavior of wrought AZ31 magnesium alloy10.1016/j.matdes.2010.05.004 ↗
20. Mechanical properties and microstructure of as-extruded AZ31 Mg alloy at high temperatures10.1016/j.msea.2011.09.036 ↗
21. Fabrication of short carbon fiber preforms coated with pyrocarbon/SiC for liquid metal infiltration10.1007/s10853-008-2664-4 ↗
22. Compressive behavior of extruded SiCw/AZ91 at temperatures close to and above the solidus of the matrix alloy10.4028/www.scientific.net/MSF.488-489.827 ↗
23. Influence of Mg17Al12 intermetallic compounds on the hot extruded microstructures and mechanical properties of Mg–9Al–1Zn alloy10.1016/j.msea.2007.02.029 ↗
24. Effect of isothermal temperature on microstructure of semi-solid 2024 alloy during partial remelting
25. Influence of temperature on fracture mechanisms of magnesium composites10.4028/www.scientific.net/MSF.482.375 ↗
26. Mechanical and fracture properties of an AZ91 magnesium alloy reinforced by Si and SiC particles10.1016/j.compscitech.2009.06.016 ↗
27. Mechanical properties in the semi-solid state and hot tearing of aluminium alloys10.1016/S0079-6425(03)00037-9 ↗
28. Ou-Yang HB. Microstructure, properties, and strengthen mechanism of Csf/AZ91D composites fabricated by extrusion process directly following vacuum infiltration. Ph.D. thesis, Northwestern polytechnical university; 2009.
29. Enhancing compressive response of AZ31B magnesium alloy using alumina nanoparticulates10.1016/j.compscitech.2008.04.020 ↗
30. Deformation and fracture characteristics of AA6061-Al2O3 particle reinforced metal matrix10.1016/S1359-6462(00)00704-1 ↗
31. Percolation and damage behaviour in materials with liquid grain boundaries10.1007/BF01117615 ↗
32. Microstructure evolution during reheating of an extruded Mg–Al–Zn alloy into the semisolid state10.1016/j.scriptamat.2004.05.010 ↗