On the optimal design of manufacturing-induced residual stresses in filament wound carbon fiber composite cylindrical shells reinforced with carbon nanotubes
Source abstract
Abstract
Abstract Process-induced residual stresses occur in composite structures composed of dissimilar materials. As these residual stresses could result in fracture, their consideration when designing composite parts is necessary. In this research, the residual stresses behavior is characterized in terms of three manufacturing features including ‘environmental’, ‘materialistic’ and ‘dimensional’ features. In experimental part, after the fabrication of carbon nanotubes (CNTs) reinforced composite shells, the slitting technique is employed to measure the released strains. Then, the elements of the stiffness matrix are obtained accomplishing an extensive computational modeling in ANSYS commercial software. The obtained results of experimental and computational parts are correlated using a MATLAB programming code, and residual stresses are calculated by calibration factors. Additionally, a statistical analysis is carried out to analyze the influence of mentioned parameters in overall scale. The experimental results had a good agreement with the analytical ones. Finally, this study highlights the complexity and the multifaceted characteristic of residual stresses development in terms of mentioned parameters in CNT-reinforced carbon fiber composite shells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Advanced machining processes and optimization · Material Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. Residual stress measurement of fiber metal laminates using incremental hole-drilling technique in consideration of the integral method10.1016/j.ijmecsci.2016.05.025 ↗
2. Residual stress measurement using the slitting method via a combination of eigenstrain, regularization and series truncation techniques10.1016/j.ijmecsci.2019.01.011 ↗
3. Characterization of residual stress and deformation in additively manufactured ABS polymer and composite specimens10.1016/j.compscitech.2017.07.017 ↗
4. An eigen-strain approach on the estimation of non-uniform residual stress distribution using incremental hole-drilling and slitting techniques10.1016/j.ijmecsci.2018.08.035 ↗
5. Residual stress and failure analyses of polymer matrix composites considering thermal cycling and temperature effects based on classical laminate plate theory
6. Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V10.1016/j.msea.2017.11.103 ↗
7. Parametric analysis of delamination in GFRP composite profiles by performing rotary ultrasonic drilling approach: experimental and statistical study10.1016/j.compositesb.2019.05.057 ↗
8. Performance enhancements of polymer-matrix composites by changing of residual stresses10.1016/j.compscitech.2008.03.001 ↗
9. Residual stresses created during curing of a polymer matrix composite using a viscoelastic model10.1016/j.compscitech.2016.05.002 ↗
10. Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model10.1016/j.engfracmech.2017.08.002 ↗
11. Effect of SWCNTs and graphene on the fatigue behavior of antisymmetric GFRP laminate10.1016/j.compscitech.2018.07.047 ↗
12. Curvature changes and weight loss of polymeric nano-composite plates with consideration of the thermal cycle fatigue effects and different resin types: an experimental approach10.1016/j.mechmat.2019.01.017 ↗
13. Interfacial properties and water resistance of epoxy and CNT-epoxy adhesives on GFRP composites10.1016/j.compscitech.2017.01.026 ↗
14. Quantitative analysis of grafted CNT dispersion and of their stiffening of polyurethane (PU)10.1016/j.compscitech.2018.12.012 ↗
15. Microstructure evolution and self-assembling of CNT networks during mechanical stretching and mechanical properties of highly aligned CNT composites10.1016/j.compscitech.2018.04.003 ↗
16. The use of carbon nanofibers for thermal residual stress reduction in carbon fiber/epoxy laminated composites10.1016/j.carbon.2013.03.016 ↗
17. The role of carbon nanofibers on thermo-mechanical properties of polymer matrix composites and their effect on reduction of residual stresses10.1016/j.compositesb.2015.03.065 ↗
18. Residual stress solution extrapolation for the slitting method using equilibrium constraints10.1115/1.2400281 ↗
19. Effect of strain gage length when determining residual stress by slitting10.1115/1.2400263 ↗
20. Determination of non-uniform residual stresses in laminated composites using integral hole drilling method: experimental evaluation10.1177/0021998312473858 ↗
21. Analysis of residual stress profiles in plastic materials using the hole drilling method – influence factors and practical aspects10.1016/j.polymertesting.2016.12.025 ↗
22. Characterization of residual stresses in a thin-walled filament wound carbon/epoxy ring using incremental hole drilling method10.1016/j.compscitech.2014.01.008 ↗
23. Slitting measurement of residual hoop stresses through the wall-thickness of a filament wound composite ring10.1007/s11340-013-9768-8 ↗
24. Artificial neural network prediction of buckling load of thin cylindrical shells under axial compression10.1016/j.engstruct.2017.09.016 ↗
25. Isogeometric analysis of large-deformation thin shells using RHT-splines for multiple-patch coupling10.1016/j.cma.2016.12.002 ↗
26. Phase-field analysis of finite-strain plates and shells including element subdivision10.1016/j.cma.2016.01.020 ↗
27. A meshfree thin shell method for non-linear dynamic fracture10.1002/nme.2013 ↗
28. A computational library for multiscale modeling of material failure10.1007/s00466-013-0948-2 ↗
29. Measurement of non-uniform residual stresses using the hole-drilling method. II. Practical application of the integral method
30. Over-critical load analysis for residual stresses and displacement around fastener-holes based on the decohesive failure mechanism and non-linear Mises yield criterion10.1016/j.euromechsol.2018.10.001 ↗
31. The measurement and prediction of residual stresses in carbon-fibre/polymer composites10.1016/S0266-3538(97)00048-1 ↗
32. Effects of surface residual stress and surface elasticity on the overall yield surfaces of nanoporous materials with cylindrical nanovoids10.1016/j.mechmat.2012.04.001 ↗
33. A new technique for the determination of superficial residual stresses associated with machining and other manufacturing processes10.1016/j.jmatprotec.2005.06.067 ↗
34. Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel10.1016/j.matdes.2011.03.012 ↗
35. An experimental investigation into additive manufacturing-induced residual stresses in 316L stainless steel10.1007/s11661-014-2549-x ↗
36. Low thermal cycling effects on mechanical properties of laminated composite materials10.1016/j.mechmat.2016.01.012 ↗
37. Use of inverse solutions for residual stress measurements10.1115/1.2204952 ↗
38. Application of slitting method to characterize the effects of thermal fatigue, lay-up arrangement and MWCNTs on the residual stresses of laminated composites10.1016/j.mechmat.2019.04.008 ↗
39. Isolation of residual shear stress effects in slitting measurement of residual normal stress in laminated composites10.1177/0021998313477895 ↗
40. A comparison between the slitting method and the classical lamination theory in determination of macro-residual stresses in laminated composites10.1016/j.compstruct.2012.10.001 ↗
41. Simulation of central hole drilling process for measurement of residual stresses in isotropic, orthotropic, and laminated composite plates10.1177/0021998306063803 ↗
42. Simulation of slitting method for calculation of compliance functions of laminated composites
43. Influence of cooling rate on residual stress profile in veneering ceramic : measurement by hole-drilling
44. Structures and properties of the compression-molded istactic-polypropylene/talc composites: effect of cooling and rolling10.1016/j.polymdegradstab.2010.05.001 ↗
45. Effect of cooling rates on the dendritic morphology transition of Mg–6Gd alloy by in situ X-ray radiography10.1016/j.jmst.2017.11.047 ↗
46. The effect of mandrel material on the processing-induced residual stresses in thick filament wound composite cylinders10.1177/073168449301200607 ↗
47. The effects of Mandrel material and tow tension on defects and compressive strength of hoop-wound, on-line consolidated, composite rings10.1016/S1359-835X(02)00018-0 ↗
48. Environmental, mechanical and materialistic effects on delamination damage of glass fiber composites: analysis and optimization10.1177/0021998319844811 ↗
49. Sensitivity and uncertainty analysis for flexoelectric nanostructures10.1016/j.cma.2018.03.016 ↗
50. Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions10.1007/s10704-017-0210-6 ↗
51. A software framework for probabilistic sensitivity analysis for computationally expensive models10.1016/j.advengsoft.2016.06.005 ↗