journal article·2016-12

Sodium vanadate nanowires @ polypyrrole with synergetic core-shell structure for enhanced reversible sodium-ion storage

Yunhe Cao, Dong Fang, Xiaoqing Liu, Zhiping Luo, Guangzhong Li, Weilin Xu, Ming Jiang, Chuanxi Xiong

Publisher page

Abstract

Abstract Use of hybridized transition-metal oxides nanostructures with a shell coating show promise for improving the electrochemical performance of sodium-ion batteries. Herein, a novel type of designed sodium vanadate @ polypyrrole (Na5V12O32@PPy) nanocomposites with a synergetic core-shell structure was fabricated using sequential hydrothermal and electrodeposition methods. When the Na5V12O32@PPy nanocomposites were employed as a cathode, the assembled sodium-ion batteries exhibited a high reversible discharge capacity of 213 mAh g−1 at a current density of 30 mA g−1, high rate performance (133 mAh g−1 at 480 mA g−1) and superior cycling performance (202 mAh g−1 at 100 mA g−1 after 100 cycles with a capacity retention of 94%). By contrast, the cycling behavior of this novel material proved to be much better than the naked Na5V12O32 nanowires. This research provides a new pathway to explore cathode materials for sodium-ion battery with enhanced electrochemical performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. Electrochemical performance of porous carbon/tin composite anodes for sodium-ion and lithium-ion batteries10.1002/aenm.201200346 ↗
2. Better cycling performance of bulk Sb in Na-Ion batteries compared to Li-Ion systems: an unexpected electrochemical mechanism10.1021/ja310347x ↗
3. Is lithium the new gold?10.1038/nchem.680 ↗
4. Building better batteries
5. Electronically conductive phosphor-olivines as lithium storage electrodes10.1038/nmat732 ↗
6. Electrodes with high power and high capacity for rechargeable lithium batteries10.1126/science.1122152 ↗
7. Electrode materials for rechargeable sodium-ion batteries: potential alternatives to current lithium-ion batteries10.1002/aenm.201200026 ↗
8. Sodium and sodium-ion energy storage batteries10.1016/j.cossms.2012.04.002 ↗
9. Na-ion batteries, recent advances and present challenges to become low cost energy storage systems10.1039/c2ee02781j ↗
10. Palomares · Energy Environ. Sci. · 2013 · 6 · 231210.1039/c3ee41031e ↗
11. Room-temperature stationary sodium-ion batteries for large-scale electric energy storage10.1039/c3ee40847g ↗
12. Sodium-ion batteries10.1002/adfm.201200691 ↗
13. In search of an optimized electrolyte for Na-ion batteries10.1039/c2ee22258b ↗
14. Electrochemical investigation of the P2-NaxCoO2 phase diagram10.1038/nmat2920 ↗
15. Study of the insertion/deinsertion mechanism of sodium into Na0.44MnO210.1021/ic0700250 ↗
16. Cycle performance improvement of NaCrO2 cathode by carbon coating for sodium ion batteries10.1016/j.elecom.2012.06.001 ↗
17. Electrochemical properties of monoclinic NaNiO210.1149/2.023302jes ↗
18. Structural evolution and electrochemistry of monoclinic NaNiO2 upon the first cycling process10.1016/j.jpowsour.2014.02.048 ↗
19. Reversible NaFePO4 electrode for sodium secondary batteries10.1016/j.elecom.2012.06.014 ↗
20. α-Na3M2(PO4)3 (M=Ti, Fe): absolution cationic ordering in NASICON-type phase10.1021/ja204321y ↗
21. High-voltage pyrophosphate cathodes10.1002/aenm.201100772 ↗
22. High-capacity, low-cost layered sodium manganese oxide material as cathode for sodium-ion batteries10.1002/cssc.201402138 ↗
23. β-NaMnO2:A high-performance cathode for sodium-ion batteries10.1021/ja509704t ↗
24. Single crystalline Na0.7MnO2 nanoplates as cathode materials for sodium-ion batteries with enhanced performance10.1002/chem.201301563 ↗
25. Electrochemical properties of monoclinic NaMnO210.1149/2.035112jes ↗
26. Recent advances and prospects of cathode materials for sodium-ion batteries10.1002/adma.201501527 ↗
27. Towards highly stable storage of sodium ions: a porous Na3V2(PO4)3/C cathode materials for sodium-ion batteries10.1002/chem.201300005 ↗
28. Superior sodium intercalation of honeycomb-structured hierarchical porous Na5V2(PO4)3/C microballs prepared by a facile one-pot synthesis10.1039/C5TA00765H ↗
29. Na0.67Mn1-xMgxO2 (0<x<0.2): a high capacity for sodium-ion batteries10.1039/C4EE00465E ↗
30. P2-Na0.6[Cr0.6Ti0.4]O2 cation-disordered electrode for high-rate symmetric rechargeable sodium-ion batteries10.1038/ncomms7954 ↗
31. Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteries10.1016/j.jpowsour.2006.08.008 ↗
32. Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composites material synthesized by a novel sol-gel method10.1016/j.electacta.2006.04.036 ↗
33. Nanosized Na4Fe(CN)6/C composites as a low-cost and high-rate cathode material for sodium-ion batteries10.1002/aenm.201100655 ↗
34. Electrochemical intercalation activity of layered NaCrO2 vs. LiCrO210.1016/j.elecom.2009.12.033 ↗
35. Hierarchical zigzag Na1.25V3O8 nanowires with topotactically encoded superior performance for sodium-ion battery cathodes10.1039/C5EE00036J ↗
36. Annealed NaV3O8 nanowires with good cycling stability as a novel cathode for Na-ion batteries10.1039/c3ta14486k ↗
37. Redox-active Fe(CN)64--Doped conducting polymers with greatly enhanced capacity as cathode materials for Li-Ion batteries10.1002/adma.201102867 ↗
38. Novel aligned sodium vanadate nanowire arrays for high-performance lithium-ion battery electrodes10.1039/C5RA01102G ↗
39. Single-crystalline bilayered V2O5 nanobelts for high-capacity sodium-ion batteries10.1021/nn405014d ↗
40. NaV6O15 nanoflakes with good cycling stability as a cathode for sodium ion battery10.1149/2.0151501jes ↗
41. Annealed NaV3O8 nanowires with good cycling stability as a novel cathode for Na-ion batteries10.1039/c3ta14486k ↗
42. Dar · J. Phys. Chem. C · 2012 · 116 · 527710.1021/jp205652d ↗
43. NaV3O8 nanosheet@polypyrrole core-shell composites with good electrochemical performance as cathodes for Na-ion batteries10.1039/C5NR02064F ↗
44. Inorganic/organic mesostructure directed synthesis of wire/ribbon-like polypyrrole nanostructures10.1039/b405255b ↗
45. Effects of electrochemical process parameters on the synthesis and properties of polypyrrole coating on steel10.1016/S0379-6779(97)04112-X ↗
46. Construction of high-Capacitance3D CoO@Polypyrrole nanowire array electrode for aqueous asymmetric supercapacitor10.1021/nl400378j ↗
47. On the morphology and growth of electrochemically polymerized polypyrrole10.1016/0032-3861(95)90931-Q ↗
48. Electrochemical of surfactant-doped polypyrrole Film(I): formation of columnar structure by electropolymerization10.1149/1.2044042 ↗
49. Modeling of growth morphology of underpotential electropolymerization of pyrrole on graphite10.1149/1.1838232 ↗
50. Narrow pore-diameter polypyrrole nanotubes10.1021/ja054789v ↗
51. Functionalized N-doped interconnected carbon nanofibers as an anode material for sodium-ion storage with excellent performance10.1016/j.carbon.2012.12.072 ↗
52. Disodium terephthalate (Na2C8H4O4) as high performance anode material for low-cost room-temperature sodium-ion battery10.1002/aenm.201200166 ↗
53. Electrochemical capacitance of a nanoporous composite of carbon nanotubes and polypyrrole10.1021/cm010744r ↗
54. Well-defined core-shell carbon black/polypyrrole nanocomposites for electrochemical energy storage10.1021/am1012529 ↗
55. NaV6O15 nanoflakes with good stability as a cathode for sodium ion battery10.1149/2.0151501jes ↗
56. Plate-type NaV3O8 cathode by solid state reaction for sodium-ion batteries10.1149/2.0031407eel ↗
57. A polyaniline-coated sulfur/carbon composite with an enhanced high-rate capability as a cathode material for lithium/sulfur batteries10.1002/aenm.201200017 ↗
58. Improving the electrochemical performance of the LiNi0.5Mn1.5O4 spinel by polypyyrole coating as a cathode material for the lithium-ion battery10.1039/C4TA04018J ↗
59. Raid microwave-solvothermal synthesis of phosphor-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries10.1016/j.elecom.2008.04.004 ↗
60. Building better batteries10.1038/451652a ↗
61. SnO2 nanoparticles@polypyrrole nanowires composites as anode materials for rechargeable lithium-ion batteries10.1016/j.jpowsour.2010.09.075 ↗
62. CuO/polypyrrole core-shell nanocomposites as anode materials for lithium-ion batteries10.1016/j.elecom.2012.04.005 ↗
63. Nanoengineered polypyrrole-coated Fe2O3@C multifunctional composites with an improved cycle stability as lithium-ion andoes10.1002/adfm.201202254 ↗
64. Polypyrrole-NiO composite as high-performance lithium storage material10.1016/j.electacta.2013.04.086 ↗
65. Shell structure control of PPy-modified CuO composite nanoleaves for lithium batteries with improved cyclic perfromance10.1021/sc500755d ↗
66. Revisit of polypyrrole as cathode material for lithium-ion battery10.1149/2.042210jes ↗