The cell growth-induced orientation of mica in lightweight flexible poly (vinyl chloride) foams and its enhancement on sound insulation
Source abstract
Abstract
Abstract The lightweight flexible poly(vinyl chloride) (PVC)/mica composite foams with low density (0.51 g/cm 3 ) which is 40–60% reduction and high sound insulation performance (an average STL of 28.3 dB) were prepared in this work. And the influences of mica content and foaming time on the cell morphology, mica distribution, and sound transmission loss (STL) were investigated. It was observed that the PVC/mica foams not only showed good sound insulation properties, but also maintained ultra-light in weight when the mica content was below 10 wt%. In addition, as the foaming time became longer, the cell density increased and the cell-wall thickness decreased. As a result, the bi-axial stretching induced by the cell growth would drive the mica platelets to orient along the thin cell walls, which significantly increased the sound insulation properties. Simultaneously, the flexibility and reusability of the foams were tested by cyclic compression. When the mica content was below 10 wt%, the PVC/mica composite foams showed low compressive stress and low permanent strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Acoustic Wave Phenomena Research · Electromagnetic wave absorption materials · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Study on sound absorption property of ramie fiber reinforced poly (l-lactic acid) composites: morphology and properties10.1016/j.compositesa.2010.04.007 ↗
2. Recent advances in the sound insulation properties of bio-based materials10.15376/biores.9.1.1764-1786 ↗
3. Effect of biopolymer blends on physical and Acoustical properties of biocomposite foams10.1002/polb.23522 ↗
4. Rheological and foaming behavior of linear and branched polylactides10.1007/s00397-014-0801-3 ↗
5. Structural acoustics and vibration behavior of complex panels10.1016/0003-682X(94)90047-7 ↗
6. The acoustical performance of small close fitting enclosure, part 1: theoretical models10.1016/0022-460X(91)90620-Y ↗
7. Study on the sound insulation property of polymer composites
8. Soundproofing effect of polypropylene/inorganic particle composites10.1016/j.compositesb.2012.02.020 ↗
9. Sound insulation in polymer/inorganic particle composites. I. Theoretical model10.1002/app.34824 ↗
10. Soundproofing properties of polypropylene/clay/carbon nanotube nanocomposites10.1002/app.39194 ↗
11. Soundproofing effect of nano particle reinforced polymer composites10.1007/s12206-008-0419-4 ↗
12. Experimental and theoretic studies on sound transmission loss of laminated mica-filled poly (vinyl chloride) composites10.1002/app.34047 ↗
13. Using elastomers and rubbers for heat-conduction damping of sound and vibrations10.1021/ma902648b ↗
14. Cellular structure control and sound absorption of polyolefin microlayer sheets10.1016/j.compositesb.2015.09.052 ↗
15. Sound insulation property of wood–waste tire rubber composite10.1016/j.compscitech.2010.03.015 ↗
16. Damping properties and transmission loss of polyurethane. I. Effect of soft and hard segment compositions10.1002/(SICI)1097-4628(20000131)75:5<604::AID-APP2>3.0.CO;2-# ↗
17. Development of polylactide open-cell foams with bimodal structure for high-acoustic absorption10.1002/app.39518 ↗
18. Characterization of the structure, acoustic property, thermal conductivity, and mechanical property of highly expanded open-cell polycarbonate foams10.1002/mame.201400125 ↗
19. Improvement of cell opening by maintaining a high temperature difference in the surface and core of a foam extrudate10.1177/0021955X07079150 ↗
20. Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: effect of foaming temperature10.1016/j.matdes.2010.08.030 ↗
21. Design and development of novel bio-based functionally graded foams for enhanced acoustic capabilities10.1007/s10853-014-8681-6 ↗
22. A simplistic unit cell model for sound absorption of cellular foams with fully/semi-open cells10.1016/j.compscitech.2015.09.009 ↗
23. Sound propagation in composite micro-tubes with surface-mounted fibrous roughness elements10.1016/j.compscitech.2016.02.035 ↗
24. Polymorphism, piezoelectricity and sound absorption of electrospun PVDF membranes with and without carbon nanotubes10.1016/j.compscitech.2016.03.001 ↗
25. Numerical and experimental investigation of the effect of structural links on the sound transmission of a lightweight double panel structure10.1016/j.jsv.2009.02.019 ↗
26. Effects of thickness and delamination on the damping in honeycomb–foam sandwich beams10.1016/j.jsv.2005.11.024 ↗
27. Light-weight poly (vinyl chloride)-based soundproofing composites with foam/film alternating multilayered structure10.1016/j.compositesa.2015.07.013 ↗
28. Lightweight polypropylene/stainless-steel fiber composite foams with low percolation for efficient electromagnetic interference shielding10.1021/am500445g ↗
29. Novel thermally conductive thermoplastic/ceramic composite foams10.1002/mame.201100400 ↗
30. Facile preparation of lightweight microcellular polyetherimide/graphene composite foams for electromagnetic interference shielding10.1021/am303289m ↗
31. Polypropylene/carbon nanotube nano/microcellular structures with high dielectric permittivity, low dielectric loss, and low percolation threshold10.1016/j.carbon.2014.01.031 ↗
32. Biaxial flow-induced alignment of silicate layers in polypropylene/clay nanocomposite foam10.1021/nl010051+ ↗
33. Investigation on fabrication and property of acoustic gradient composites10.1016/j.compscitech.2015.11.024 ↗
34. Impedance-matching properties of an inhomogeneous matching layer with continuously changing acoustic impedance10.1121/1.388085 ↗
35. Electromagnetic interference (EMI) shielding of single-walled carbon nanotube epoxy composites10.1021/nl0602589 ↗
36. Sound transmission testing of polymer compounds10.1016/j.polymertesting.2011.12.007 ↗
37. An analytical and experimental investigation of active structural acoustic control of noise transmission through double panel systems10.1016/S0022-460X(03)00418-8 ↗
38. Analytical and experimental investigation on transmission loss of clamped double panels: implication of boundary effects10.1121/1.3075766 ↗
39. Analytical modeling of fluid loaded orthogonally rib-stiffened sandwich structures: sound transmission10.1016/j.jmps.2010.05.008 ↗
40. Sound insulation characteristics of multi-layer structures with a microperforated panel10.1016/j.apacoust.2011.05.009 ↗
41. Extruded PLA/clay nanocomposite foams blown with supercritical CO 210.1016/j.polymer.2014.06.059 ↗
42. Development of poly (lactic acid) cellular materials: physical and morphological characterizations10.1016/j.polymer.2012.10.005 ↗
43. Effect of carbon black content on microcellular structure and physical properties of chlorinated polyethylene rubber foams10.1016/j.matdes.2009.12.041 ↗
44. Heterogeneous nucleation uniformizing cell size distribution in microcellular nanocomposites foams10.1016/j.polymer.2006.08.034 ↗
45. The orientation of carbon nanotubes in poly (ethylene-co-octene) microcellular foaming and its suppression effect on cell coalescence10.1002/pen.23157 ↗
46. Multifunctional polymer foams with carbon nanoparticles10.1016/j.progpolymsci.2013.11.002 ↗
47. Acoustic impedance matching of piezoelectric transducers to the air10.1109/TUFFC.2004.1320834 ↗
48. Study on microstructure and mechanical properties relationship of short fibers/rubber foam composites10.1016/j.eurpolymj.2004.04.016 ↗
49. Superhydrophobic and oleophilic open-cell foams from fibrillar blends of polypropylene and polytetrafluoroethylene10.1021/am506006v ↗
50. Compression set property and stress–strain behavior during compression of polysulfide sealants10.1002/app.31198 ↗