Electrothermally responsive self-healing for carbon fiber/epoxy interphase based on Diels-Alder adducts
Source abstract
Abstract
Abstract A more facile and more efficient self-healing strategy for carbon fiber/thermoset resin interphase was established based on electrothermal effect of carbon fiber (CF) driving the reversible transformation of covalent bonds. Diels-Alder cycloaddition adduct was introduced into the CF/epoxy (EP) interphase region to endow the interphase with thermoreversible covalent bonds through the oxidative co-polymerization and chemical surface grafting, which was nondestructive but more efficient. The modified carbon fiber was characterized via SEM, AFM, XPS and TGA. The CF/EP interphase temperature range in CF reinforced polymer composites (CFRPs) was adjusted through controlling the electric current applied to CFs according to the thermo-sensitivity of CF. The effect of electrothermal effect on the matrix resin around CFs was measured by micro-FTIR. The interfacial shear strength (IFSS) measurement verified that the electrothermal effect promoted the reversible transformation of the Diels-Alder cycloaddition adducts connecting the modified CFs with matrix resin, resulting in the self-healing behavior of the damaged interphase. This self-healing strategy not only can improve the interfacial adhesion of CFRPs without damages to the CF surface caused by the traditional oxidation modification methods, but also can reduce the possible heating aging and deformation of composites caused by convective thermal repairing methods. This strategy is a more efficient process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer composites and self-healing · Fiber-reinforced polymer composites · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Consideration of lifetime and fatigue load in wind turbine control10.1016/j.renene.2018.07.109 ↗
2. Design and analysis of biomimetic nose cone for morphing of aerospace vehicle10.1016/S1672-6529(16)60400-6 ↗
3. The significance of damage and defects and their detection in composite materials: a review10.1243/03093247V271029 ↗
4. Fatigue damage mechanisms in unidirectional carbon-fibre-reinforced plastics10.1023/A:1004684228765 ↗
5. Damage in composites: from physical mechanisms to modelling10.1016/j.compscitech.2005.07.035 ↗
6. Surface modification of carbon fiber for improving the interfacial adhesion between carbon fiber and polymer matrix10.1002/pat.3720 ↗
7. Carbon fiber surfaces and composite interphases10.1016/j.compscitech.2014.07.005 ↗
8. Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites10.1016/j.compscitech.2010.02.014 ↗
9. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
10. The potential of microencapsulated self-healing materials for microcracks recovery in self-healing composite systems: a review10.1080/15583724.2015.1107098 ↗
11. Self-healing Ag/epoxy electrically conductive adhesive using encapsulated epoxy-amine healing chemistry10.1002/app.41483 ↗
12. Self-healing thermoset using encapsulated epoxy-amine healing chemistry10.1016/j.polymer.2011.12.005 ↗
13. A self-sealing fiber-reinforced composite10.1177/0021998309356605 ↗
14. Autonomic recovery of Fiber/Matrix interfacial bond strength in a model composite10.1002/adfm.201090089 ↗
15. Polydimethylsiloxane-based self-healing materials10.1002/adma.200501814 ↗
16. Continuous Self-Healing life cycle in vascularized structural composites10.1002/adma.201400248 ↗
17. Pressurized vascular systems for self-healing materials10.1098/rsif.2011.0508 ↗
18. Self-Healing of internal damage in synthetic vascular materials10.1002/adma.201002561 ↗
19. Self-Healing materials with interpenetrating microvascular networks10.1002/adma.200900588 ↗
20. Recovery and improvement in low-velocity impact properties of e-glass/epoxy composites through novel self-healing technique10.1016/j.compstruct.2013.09.023 ↗
21. Thermoreversible and remendable glass–polymer interface for fiber-reinforced composites10.1016/j.compscitech.2010.11.022 ↗
22. Self-healing and thermoreversible rubber from supramolecular assembly10.1038/nature06669 ↗
23. A thermally re-mendable Cross-Linked polymeric material10.1126/science.1065879 ↗
24. Autonomic healing of carbon Fiber/Epoxy interfaces10.1021/am500536t ↗
25. Result of vascular tube design on the curative and mechanical performance of modified carbon fibers/hybrid resin self‐healing composites10.1002/pc.25507 ↗
26. Mechanical behaviour of micro-capsules and their rupture under compression10.1016/j.ces.2015.11.002 ↗
27. Self-healing efficiency of cementitious materials containing tubular capsules filled with healing agent10.1016/j.cemconcomp.2011.01.004 ↗
28. Self-healing materials with microvascular networks10.1038/nmat1934 ↗
29. Mussel-inspired immobilization of BN nanosheets onto poly(p-phenylene benzobisoxazole) fibers: multifunctional interface for photothermal self-healing10.1016/j.apsusc.2018.01.307 ↗
30. Light triggered interfacial damage self-healing of poly(p-phenylene benzobisoxazole) fiber composites10.1088/1361-6528/aab010 ↗
31. Effect of epoxy matrix architecture on the self-healing ability of thermo-reversible interfaces based on Diels-Alder reactions: demonstration on a carbon fiber/epoxy microcomposite10.1039/C6RA23246A ↗
32. Electric resistive heat curing of the Fiber-Matrix interphase in Graphite/Epoxy composites10.1115/1.2919324 ↗
33. Resistance heating for self-healing composites10.1177/0021998306069876 ↗
34. Multiple healing effect of thermally activated self-healing composites based on Diels–Alder reaction10.1016/j.compscitech.2010.08.017 ↗
35. Healing behavior of a matrix crack on a carbon fiber/mendomer composite10.1016/j.compscitech.2009.01.031 ↗
36. Towards development of a Self-Healing composite using a mendable polymer and resistive heating10.1177/0021998308097280 ↗
37. Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres10.1016/S0008-6223(99)00266-3 ↗
38. Effect of fiber microstructure upon the modulus of PAN- and Pitch- based carbon fibers10.1016/0008-6223(94)00109-D ↗
39. Influence of different surface treatments on the interfacial adhesion of graphene oxide/carbon fiber/epoxy composites10.1016/j.apsusc.2018.06.161 ↗
40. Mussel-inspired modification of carbon fiber via polyethyleneimine/polydopamine co-deposition for the improved interfacial adhesion10.1016/j.compscitech.2017.08.008 ↗
41. The effect of oxidation treatment by KClO3/H2SO4 system on intersurface performance of carbon fibers10.1016/j.apsusc.2012.12.066 ↗
42. Polydopamine as an efficient and robust platform to functionalize carbon fiber for High-Performance polymer composites10.1021/am404394g ↗
43. New hybrid method for simultaneous improvement of tensile and impact properties of carbon fiber reinforced composites10.1016/j.carbon.2011.07.055 ↗
44. Tribological studies on polyetherimide composites based on carbon fabric with optimized oxidation treatment10.1016/j.wear.2010.11.052 ↗
45. Comparison of different surface treatments of carbon fibers used as reinforcements in epoxy composites: interfacial strength measurements by in-situ scanning electron microscope tensile tests10.1016/j.compscitech.2018.08.018 ↗
46. Interfacial characterization, control and modification of carbon fiber reinforced polymer composites10.1016/j.compscitech.2015.08.002 ↗
47. Reducing adhesion force by means of atomic layer deposition of ZnO films with nanoscale surface roughness10.1021/am4053333 ↗
48. Self-healable interfaces based on thermo-reversible Diels–Alder reactions in carbon fiber reinforced composites10.1016/j.jcis.2014.05.007 ↗