Multilayered damping composites with damping layer/constraining layer prepared by a novel method
Source abstract
Abstract
Abstract The alternating multilayered damping composites, chlorinated butyl rubber (CIIR) as damping layer and polymethyl methacrylate (PMMA) as constraining layer, were first prepared through novel multilayered co-extrusion. The damping properties of the CIIR/PMMA multilayered damping composites were investigated by dynamic mechanical analysis (DMA). The results showed that the damping peak moved to high temperature and the efficient damping temperature range was broaden with the layer number increasing. The shift of the loss peak was ascribed to the move of Rouse mode of CIIR, which was attributed to the motion of longer chain segment, but the local segmental motion was not changed. Finite element analysis (FEA) was used to simulate the distribution of shear strain in the multilayered damping composites. The FEA results exhibited that, in the temperature range between Tg-CIIR and Tg-PMMA, the shear strain occurred in the CIIR layer under vibration field, since the storage modulus (E′) of PMMA was much higher than that of CIIR. Furthermore, the average shear strain was increased with the layer number increasing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer Nanocomposites and Properties · Tribology and Wear Analysis · Dielectric materials and actuators
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. David · 2001
2. Soft elasticity and mechanical damping in liquid crystalline elastomers10.1063/1.1368177 ↗
3. Novel epoxy compositions for vibration damping applications10.1002/pat.513 ↗
4. Dynamic mechanical properties of EPDM rubber blends10.1080/03602550701817611 ↗
5. Damping behavior of sandwich beam laminated with CIIR/petroleum resins blends by DMA measurement10.1002/app.25450 ↗
6. Micromechanics and damping properties of composites integrating shear thickening fluids10.1016/j.compscitech.2008.11.019 ↗
7. Analytical modeling of damping at micromechanical level in polymer composites reinforced with coated fibers10.1016/S0266-3538(00)00003-8 ↗
8. Supported dynamic mechanical thermal analysis: an easy, powerful and very sensitive technique to assess thermal properties of polymer, coating and even nanocoating10.1016/S0032-3861(00)00915-0 ↗
9. Multi-layer in-situ for evaluation of dynamic mechanical properties of pressure sensitive adhesives10.1016/j.ijadhadh.2006.09.014 ↗
10. Damping analysis of orthotropic composites with interleaved viscoelastic layers: modelling10.1177/0021998306061302 ↗
11. Damping analysis of orthotropic composites with interleaved viscoelastic layers: experimental investigation and discussion10.1177/0021998306061303 ↗
12. Dynamic analysis and damping of composite structures embedded with viscoelastic layers10.1016/S1359-8368(96)00073-X ↗
13. Dimensionless analysis of constrained damping treatments10.1016/j.compstruct.2012.11.037 ↗
14. Experimental studies on the loss factor of alternately laminated anisotropic damped thin plates10.1177/0731684406059782 ↗
15. Multilayer damping treatments: modeling and experimental assessment10.1177/1099636209104530 ↗
16. Effect of confinement on the relaxation behavior of poly (ethylene oxide)10.1016/j.polymer.2010.02.016 ↗
17. The multilayered distribution of intumescent flame retardants and its influence on the fire and mechanical properties of polypropylene10.1016/j.compscitech.2013.12.022 ↗
18. Structure and properties of electrically conducting composites consisting of alternating layers of pure polypropylene and polypropylene with a carbon black filler10.1016/j.polymer.2008.08.056 ↗
19. The origin of a new transition in dynamic mechanical spectra of multilayer polymeric composite10.1016/j.polymer.2012.04.004 ↗
20. Simulation of mechanical properties of multilayered propylene–ethylene copolymer/ethylene 1-octene copolymer composites by equivalent box model and its experimental verification10.1016/j.eurpolymj.2009.07.013 ↗
21. Viscoelastic properties of polymers. 4. Thermorheological complexity of the softening dispersion in polyisobutylene10.1021/ma00123a007 ↗
22. Viscoelastic properties of amorphous polymers. I. Different temperature dependences of segmental relaxation and terminal dispersion10.1021/ma00045a016 ↗
23. Molecular motions in glass–rubber transition region in polyisobutylene investigated by two-dimensional correlation dielectric relaxation spectroscopy10.1063/1.3640479 ↗
24. Nature of the sub-Rouse modes in the glass−rubber transition zone of amorphous polymers10.1021/ma102897e ↗
25. Using two-dimensional correlation dynamic mechanical spectroscopy to detect different modes of molecular motions in the glass−rubber transition region in polyisobutylene10.1021/jp110890n ↗
26. Confinement effect of polystyrene on the relaxation behavior of polyisobutylene10.1002/polb.22098 ↗