The effect of carbon fabric treatment on delamination of 2D-C/C composites
Source abstract
Abstract
The influence of carbon fabric treatment on delamination in two dimensional carbon/carbon composites (2D-C/C) was studied. The surface chemical elements and surface morphology of both original and treated carbon fibres were examined by X-ray photoelectron spectroscopy and scanning electron microscope. The properties including interlaminar shear stress, density and open porosity were tested, and delamination defects were characterized using metallographic microscope. It has found that the concentration of surface oxygen element decreases, while carbon element increases after high temperature treatment, which indicates the activities of carbon fiber reduced. The 2D-C/C composites with treated carbon fabric are non-delaminable, while the non-treated carbon fabric reinforced 2D-C/C composites are delaminable during carbonization, which are largely attributed to various interfacial strength in polymer matrix composites, and different degree of matrix carbonization shrinkage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Fiber-reinforced polymer composites · Silicone and Siloxane Chemistry
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. The future of carbon–carbon composites10.1016/0008-6223(87)90116-3 ↗
2. Maahs HG, Vaughn WL, Kowbel W. Four advances in carbon–carbon materials technology, N94-30481; 1994.
3. Ransone PO, Yamaki YR, Maahs HG. Recent advances in carbon–carbon substrate technology at NASA Langley Research Center, N-93-12455; 1993.
4. Development of C/C composites for OREX (orbital reentry experimental vehicle) nose cap10.1163/156855196X00293 ↗
5. Unique application of carbon–carbon composite materials
6. Carbon/carbon composite materials for aircraft brakes10.1002/9780470310496.ch4 ↗
7. Li Chongjun, Jin Zhihao, Yan Liansheng. The carbon cloth reinforced 2D-C/C composites with phenolics as matrix precursor. In: Carbon’02, 2nd world carbon conference, Beijing; 2002.
8. Fitzer E, Geigl KH, Huttner W. The influence of C-fiber surface treatment on the mechanical properties of C/C-composites. In: The 14th biennial conference on carbon. American carbon conference, PA; 1979.
9. Microstructural change of pitch derived carbon matrix in C/C composite by ozone treatment on carbon fiber10.7209/tanso.1995.247 ↗
10. Interfaces in carbon–carbon composites
11. Gao Fengge, Patrick JW, Walker A. The surface properties of carbon fibers and their influence on the void structure of carbon/carbon composites. In: The 23rd biennial conference on carbon. American carbon conference, CA; 1997.
12. Parashar VK, Dhakate SR, Bahl OP, Guimon C. Role of interphase in the development of high performance carbon/carbon composites. In: Eurocarbon98, Strasbourg, France; 1998, p. 483.
13. Studies of pyrolysis of phenolic resin reinforced with two-dimensional plain woven carbon fabric-I10.1007/BF00735665 ↗
14. Bercloyes M. SRM nozzle design breakthroughs with advanced composite materials. AIAA 93-2009; 1993.10.2514/6.1993-2009 ↗
15. Dhami TL, Mathur RB, Dwivedi H, Bahl OP, Monthioux M. Pyrolysis behaviour of panex based polymer composites. In: The 23rd biennial conference on carbon. American carbon conference, PA; 1997, p. 474.