Damage detection and self-healing of carbon fiber polypropylene (CFPP)/carbon nanotube (CNT) nano-composite via addressable conducting network
Source abstract
Abstract
Abstract In this work, damage sensing and self-healing of carbon fiber polypropylene (CFPP)/carbon nanotube (CNT) nano-composite were performed based on addressable conducting network (ACN). To increase damage sensing resolution of CFPP/CNT nano-composite, through-thickness electrical conductivity was improved by adjusting press condition and spraying carbon nanotubes (CNT) between prepregs. From the results, electrical resistivity in thickness direction was reduced to 19.44 Ω·mm under 1.0 MPa and 1.0 wt% of CNT condition. Also, self-healing efficiency was examined with respect to the temperature and time via resistive heating of CFPP/CNT nano-composite. As a result, the optimized fabrication and self-healing condition exhibited high resolution of damage sensing with outstanding self-healing efficiency (96.83%) under fourth cycle of repeated three-point bending test.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Microstructural damage dependent stiffness prediction of unidirectional CFRP composite under cyclic loading10.1016/j.compositesa.2017.05.010 ↗
2. Damage sensing of adhesively-bonded hybrid composite/steel joints using carbon nanotubes10.1016/j.compscitech.2010.10.009 ↗
3. Comparative studies on the effect of pilot drillings with application to high-speed drilling of carbon fibre reinforced plastic (CFRP) composites
4. Park · 2017
5. Effects of ultrahigh molecular weight polyethylene and mould temperature on morphological evolution of isotactic polypropylene at micro-injection moulding condition10.1016/j.polymertesting.2015.06.018 ↗
6. Smart coatings of epoxy based CNTs designed to meet practical expectations in aeronautics10.1016/j.compositesb.2018.04.027 ↗
7. Enhancing fatigue resistance and damage characterisation in adhesively-bonded composite joints by carbon nanofibres10.1016/j.compscitech.2017.06.018 ↗
8. Analysis of the damage mechanisms in mixed-mode delamination of laminated composites using acoustic emission data clustering10.1177/0892705715598362 ↗
9. Review of impact damages modelling in laminated composite aircraft structures
10. Lightning strikes to aircraft radome: electric field shielding simulation, gas discharges and their applications
11. Nondestructive evaluation of hidden multi-delamination in a glass-fiber-reinforced plastic composite using terahertz spectroscopy10.1016/j.compstruct.2015.09.055 ↗
12. Nondestructive evaluation of GFRP composite including multi-delamination using THz spectroscopy and imaging10.1016/j.compstruct.2017.11.012 ↗
13. Automatic defect detection based on segmentation of pulsed thermographic images10.1016/j.chemolab.2017.01.008 ↗
14. A comparison of the pulsed, lock-in and frequency modulated thermography nondestructive evaluation techniques10.1016/j.ndteint.2011.06.008 ↗
15. Cost optimization of composite aircraft structures including variable laminate qualities10.1016/j.compscitech.2008.05.024 ↗
16. Wireless impedance sensor nodes for functions of structural damage identification and sensor self-diagnosis10.1088/0964-1726/18/5/055001 ↗
17. Detecting barely visible impact damage detection on aircraft composites structures10.1016/j.compstruct.2009.04.014 ↗
18. Strain and damage monitoring in carbon-nanotube-based composite under cyclic strain10.1016/j.compositesa.2015.01.001 ↗
19. The mechanical characteristics of smart composite structures with embedded optical fiber sensors10.1016/0263-8223(95)00038-0 ↗
20. Effect of embedded optical fiber sensors on transverse crack spacing of smart composite structures10.1016/0263-8223(95)00039-9 ↗
21. Influence of carbon nanoparticles/epoxy matrix interaction on mechanical, electrical and transport properties of structural advanced materials10.1088/1361-6528/aa583d ↗
22. Graphene/epoxy interleaves for delamination toughening and monitoring of crack damage in carbon fibre/epoxy composite laminates10.1016/j.compscitech.2016.12.028 ↗
23. Damage mapping of GFRP via electrical resistance measurements using nanocomposite epoxy matrix systems10.1016/j.compositesb.2013.09.049 ↗
24. Experimental and theoretical study on piezoresistive properties of a structural resin reinforced with carbon nanotubes for strain sensing and damage monitoring10.1016/j.compositesb.2018.03.025 ↗
25. Piezoresistive properties of resin reinforced with carbon nanotubes for health-monitoring of aircraft primary structures10.1016/j.compositesb.2016.09.061 ↗
26. Improved fracture toughness and integrated damage sensing capability by spray coated CNTs on carbon fibre prepreg10.1016/j.compositesa.2014.11.029 ↗
27. Enhancing interlaminar fracture characteristics of woven CFRP prepreg composites through CNT dispersion10.1177/0021998311410472 ↗
28. An addressable conducting network for autonomic structural health management of composite structures10.1088/0964-1726/19/10/105023 ↗
29. Towards practical application of electrical resistance change measurement for damage monitoring using an addressable conducting network10.1177/1475921711424519 ↗
30. Investigation of temperature dependency of electrical resistance changes for structural management of graphite/polymer composite10.1177/0021998311416683 ↗
31. Thermally responsive self-healing composites with continuous carbon fiber reinforcement10.1016/j.compscitech.2015.08.015 ↗
32. Resistance heating for self-healing composites10.1177/0021998306069876 ↗
33. A self-healing composite using a thermally remendable polymer10.1177/0021998308097280 ↗
34. Healing behavior of a matrix crack on a carbon fiber/mendomer composite10.1016/j.compscitech.2009.01.031 ↗
35. Effect of acid treatment on the multiwalled carbon nanotubes10.1179/1432891714Z.0000000001038 ↗
36. Functionalization of carbon nanotube yarn by acid treatment10.1080/19475411.2014.896426 ↗
37. Correlation of surface treatment, dispersion and mechanical properties of HDPE/CNT nanocomposites10.1016/j.apsusc.2016.07.164 ↗
38. The characteristics of CNT/cement composites with acid-treated MWCNTs10.1155/2015/308725 ↗
39. Online monitoring of surface cracks and delaminations in carbon fiber/epoxy composites using silver nanoparticle based ink
40. Effect of the cooling rate on the mechanical properties of glass fiber reinforced thermoplastic composites10.1016/j.compstruct.2017.06.007 ↗
41. Finite element analysis of a low-velocity impact test for glass fiber-reinforced polypropylene composites considering mixed-mode interlaminar fracture toughness10.1016/j.compstruct.2016.10.093 ↗
42. In situ damage sensing in the glass fabric reinforced epoxy composites containing CNT–Al 2 O 3 hybrids10.1016/j.compscitech.2014.05.005 ↗
43. Joule heating in single-walled carbon nanotubes10.1063/1.3204971 ↗