Effect of polyurethane dispersion as surface treatment for carbon fabrics on mechanical properties of carbon/Nylon composites
Source abstract
Abstract
Abstract This study addresses the effects of two types of polyurethane dispersions as an interfacial treatment, on the mechanical behavior of CF/Nylon laminates. Five types of CF/Nylon laminates with different surface treatments are tested and evaluated by quasi-static mechanical tests (including the on-/off-axial tensile, 3-point bending, and short beam tests) and low velocity impact tests (including Izod impact and drop weight impact tests). The resin impregnation condition of CF/Nylon laminates is evaluated through digital microscope observation. Dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy were employed to check the surface treatment effects and interfacial interaction properties. In addition to the above mentioned mechanical tests, the knee point method and acoustic emission test were employed to look for the initial fracture and check the fracture variation of CF/Nylon laminates. Furthermore, scanning electric microscope images of single fiber and fractured carbon fiber bundles confirmed the interfacial properties evaluated by DMA analysis. Finally, a correlation between interfacial interaction and various mechanical properties of composites was successfully observed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. A study on the energy absorption properties of carbon/aramid fiber filament winding composite tube10.1016/j.compstruct.2014.12.067 ↗
2. A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites10.1016/j.compstruct.2016.10.037 ↗
3. A study on the failure behavior and mechanical properties of unidirectional fiber reinforced thermosetting and thermoplastic composites10.1016/j.compositesb.2016.06.005 ↗
4. Off-axis tensile fatigue assessment based on residual strength for the unidirectional 45 carbon fiber-reinforced composite at room temperature10.1016/j.compositesa.2016.09.001 ↗
5. Crashworthiness of carbon fiber hybrid composite tubes molded by filament winding10.1016/j.compstruct.2015.11.053 ↗
6. Mechanical and optical properties of silk fabric/glass fiber mat composites: an artistic application of composites
7. Tensile properties and aspect ratio simulation of transversely isotropic discontinuous carbon fiber reinforced thermoplastics10.1016/j.compscitech.2016.10.024 ↗
8. Effect of surface modification of bamboo cellulose fibers on mechanical properties of cellulose/epoxy composites10.1016/j.compositesb.2013.02.031 ↗
9. Effect of surface treatment on mode I interlaminar fracture behaviour of plain glass woven fabric composites: Part I. Report of the 2nd round-robin test results10.1163/156855400300185333 ↗
10. Impact response of woven glass-fabric composites—I.: effect of fibre surface treatment10.1016/S0266-3538(97)00111-5 ↗
11. The influence of void content on the structural flexural performance of unidirectional glass fibre reinforced polypropylene composites10.1016/j.compositesa.2004.03.007 ↗
12. Effect of curing cycle on void distribution and interlaminar shear strength in polymer-matrix composites10.1016/j.compscitech.2011.05.002 ↗
13. The role of bond strength in the fracture of advanced filament reinforced composites
14. Influence of fiber property variation on composite failure mechanisms10.1520/STP36495S ↗
15. Influences of matrix ductility, interfacial bonding strength, and fiber volume fraction on tensile strength of unidirectional metal matrix composite10.1007/BF02656581 ↗
16. Recent advances in fiber/matrix interphase engineering for polymer composites10.1016/j.pmatsci.2015.02.003 ↗
17. Effect of fiber surface treatment and fiber loading on the properties of bagasse fiber–reinforced unsaturated polyester composites10.1016/j.compscitech.2007.10.005 ↗
18. Interlaminar fracture toughness of CFRP influenced by fibre surface treatment: Part 1. Experimental results10.1016/0266-3538(95)00048-8 ↗
19. Shear strength and fracture toughness of carbon fibre/epoxy interface: effect of surface treatment10.1016/j.matdes.2015.07.104 ↗
20. Effect of fiber surface-treatments on the properties of poly (lactic acid)/ramie composites10.1016/j.compositesa.2009.12.006 ↗
21. Interfacial characterization, control and modification of carbon fiber reinforced polymer composites10.1016/j.compscitech.2015.08.002 ↗
22. Influence of sizing formulations on glass/epoxy interphase properties10.1016/j.compositesa.2014.04.006 ↗
23. Effect of fiber surface treatment on the fiber–matrix bond strength of natural fiber reinforced composites10.1016/S1359-8368(98)00054-7 ↗
24. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites10.1016/j.compositesb.2008.01.002 ↗
25. Carbon fiber/carbon nanotube reinforced hierarchical composites: effect of CNT distribution on shearing strength10.1016/j.compositesb.2015.10.035 ↗
26. Improved tensile strength of carbon fibers undergoing catalytic growth of carbon nanotubes on their surface10.1016/j.carbon.2012.11.037 ↗
27. Effect of carbon nanotube waviness on the effective thermoelastic properties of a novel continuous fuzzy fiber reinforced composite10.1016/j.compositesb.2013.10.003 ↗
28. Chemical modification of henequen fibers with an organosilane coupling agent10.1016/S1359-8368(98)00055-9 ↗
29. Chemical treatments on plant-based natural fibre reinforced polymer composites: an overview10.1016/j.compositesb.2012.04.053 ↗
30. Enhanced interfacial adhesion of glass fibers by tetravinylsilane plasma modification10.1016/j.compositesa.2013.12.003 ↗
31. Atmospheric pressure glow discharge plasma polymerization for surface treatment on sized basalt fiber/polylactic acid composites10.1016/j.compositesb.2011.11.007 ↗
32. Interfacial studies on surface modified Kevlar fibre/epoxy matrix composites10.1016/S1359-8368(98)00053-5 ↗
33. Effect of nanoparticles on interfacial properties of carbon fibre–epoxy composites10.1016/j.compositesa.2013.08.005 ↗
34. Fibre–matrix adhesion in glass-fibre reinforced polyamide-6 silicate nanocomposites10.1016/S1359-835X(04)00186-1 ↗
35. Mechanical performance of glass woven fabric composite: effect of different surface treatment agents10.1016/j.compositesb.2015.08.084 ↗
36. Effects of crosslinking on thermal and mechanical properties of polyurethanes10.1002/app.10056 ↗
37. Acoustic emission analysis for characterisation of damage mechanisms in fibre reinforced thermosetting polyurethane and epoxy10.1016/j.compositesb.2013.08.080 ↗
38. Effect of polyols and diisocyanates on thermo-mechanical and morphological properties of polyurethanes10.1016/S0014-3057(99)00114-7 ↗
39. Enhancement of fatigue life of polyurethane composites containing carbon nanotubes10.1016/j.compositesb.2012.01.038 ↗
40. Polyurethane application research department
41. Effect of polyurethane dispersion treatment on the performance improvement of carbon woven fabric-reinforced composites
42. ASTM D. 3039/D 3039M · 2000
43. ASTM D. 7264/D 7261M–07. Standard test method for flexural properties of polymer matrix composite materials.
44. JIS K.7078 · 1991
45. JIS K.7110 · 1999
46. JIS K.7085 · 1993
47. Mechanical properties of textile-inserted PP/PP knitted composites using injection–compression molding10.1016/j.compositesa.2005.12.032 ↗
48. A comparative study of the mechanical properties and failure behavior of carbon fiber/epoxy and carbon fiber/polyamide 6 unidirectional composites10.1016/j.compstruct.2016.10.037 ↗
49. In vitro degradation, flexural, compressive and shear properties of fully bioresorbable composite rods10.1016/j.jmbbm.2011.05.016 ↗
50. An overview of the technology of fibre-reinforced plastics for design purposes10.1016/S0261-3069(98)00007-7 ↗
51. Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials10.1002/pc.750140508 ↗
52. Interfacial toughening and consequent improvement in fracture toughness of carbon fiber reinforced epoxy resin composites: induced by diblock copolymers10.3144/expresspolymlett.2013.90 ↗
53. Mechanochemical fabrication of carbon fiber/nylon-6 composites with interfacial bondings10.1021/ie301333n ↗
54. Wide applicability10.1115/1.4010337 ↗
55. Experimental evaluation of the strength distribution of fibers under high strain rates by bimodal Weibull distribution10.1016/S0266-3538(97)00092-4 ↗
56. Weibull statistics of fibre bundle failure using mechanical and acoustic emission testing: the influence of interfibre friction10.1016/0010-4361(95)91136-S ↗
57. Tensile properties of ultrahigh strength PAN-based, ultrahigh modulus pitch-based and high ductility pitch-based carbon fibers10.1016/j.carbon.2007.11.001 ↗
58. Statistical analysis of the mechanical properties of composite materials10.1016/S1359-8368(00)00027-5 ↗
59. Initial fracture behavior of satin woven fabric composites10.1016/S0263-8223(03)00058-8 ↗
60. Initial fracture of the welt weft-knitted textile composites10.1016/j.compositesa.2004.03.003 ↗
61. Effect of the compatibilizer content on the quasi-static and low velocity impact responses of glass woven fabric/polypropylene composites10.1002/pc.23430 ↗