Low velocity impact response of fabric reinforced hybrid composites with stratified filled epoxy matrix
Source abstract
Abstract
Abstract The aim of this study was to investigate the influence of the matrix properties, number of the carbon and aramid layers and fiber orientation on low velocity impact behavior of the fabric reinforced hybrid composites with stratified filled epoxy matrix. The impact tests were performed with the drop weight impact system at 90.629 J of energy level. The damage areas were analyzed by the visual inspection and tomographic images. The results showed that the matrix properties have a great influence over the fracture mode of the hybrid composites, while the fault degree of the damaged areas depends on the fiber orientation. The highest impact resistance was obtained in the case of hybrid composites with 0° ply orientation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Researches on the development of new composite materials complete/partially biodegradable using natural textile fibers of new vegetable origin and those recovered from textile waste10.1088/1757-899X/294/1/012021 ↗
2. Low velocity impact properties of 3D woven basalt/aramid hybrid composites10.1016/j.compscitech.2007.06.016 ↗
3. The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms10.1016/j.compscitech.2017.08.034 ↗
4. Mechanical characterization and impact damage assessment of a woven carbon fiber reinforced carbon nanotube–epoxy composite10.1016/j.compscitech.2012.12.005 ↗
5. Effect of weave structure on mechanical fracture behavior of three-dimensional carbon fiber fabric reinforced epoxy resin composites10.1016/0266-3538(92)90119-N ↗
6. Chawla · 2012
7. Impactor diameter effect on low velocity impact response of woven glass epoxy composite plates10.1016/j.compositesb.2013.02.024 ↗
8. Chung · 2010 · vol. 2
9. Investigation on static and dynamic mechanical properties of epoxy based woven fabric glass/carbon hybrid composite laminates10.1016/j.proeng.2014.12.270 ↗
10. Drop-weight impact response of hybrid composites impacted by impactor of various geometries10.1016/j.matdes.2013.05.016 ↗
11. GF/epoxy laminates embedded with wire nets: a way to improve the low-velocity impact resistance and energy absorption ability10.1016/j.compstruct.2018.04.041 ↗
12. High velocity impact behaviour of hybrid basalt-carbon/epoxy composites10.1016/j.compstruct.2017.02.039 ↗
13. The importance of translaminar fracture toughness for the penetration impact behaviour of woven carbon/glass hybrid composites10.1016/j.compositesa.2017.09.009 ↗
14. The investigation of quasi-static indentation effect on laminated hybrid composite plates10.1016/j.mechmat.2017.11.005 ↗
15. Impact behaviour of carbon/Kevlar hybrid composites10.1016/0010-4361(86)90253-3 ↗
16. The impact characteristics of fabric reinforced hybrid composites10.37358/MP.17.2.4834 ↗
17. Crystic · 2005
18. Effect of fibre orientation on the low velocity impact response of thin Dyneema® composite laminates10.1016/j.ijimpeng.2016.10.007 ↗
19. Damage resistance of carbon fibre reinforced epoxy laminates subjected to low velocity impact: effects of laminate thickness and ply-stacking sequence10.1016/j.polymertesting.2017.09.016 ↗
20. Low-velocity impact response of a nanocomposite beam using an analytical model10.1590/1679-78251346 ↗
21. Experimental and numerical studies on the impact response of damage-tolerant hybrid unidirectional/woven carbon-fibre reinforced composite laminates10.1016/j.compositesb.2017.10.016 ↗
22. Experimental study of the influence of thickness and ply-stacking sequence on the compression after impact strength of carbon fibre reinforced epoxy laminates10.1016/j.polymertesting.2018.02.009 ↗
23. Xanthos · 2010
24. 3D multiscale modeling to predict the elastic modulus of polymer/nanoclay composites considering realistic interphase property10.1080/09276440.2016.1166742 ↗
25. On the tensile behavior of clay–epoxy nanocomposite considering interphase debonding damage via mixed-mode cohesive zone material10.1016/j.compositesb.2015.11.043 ↗
26. Effect of adding nanocarbon black on the mechanical properties of epoxy10.24237/djes.2014.07107 ↗
27. Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact10.1016/j.compositesb.2017.05.065 ↗
28. Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperatures10.1016/j.matdes.2013.06.051 ↗
29. An experimental study on low-velocity impact response of nanocomposite beams reinforced with nanoclay10.1016/j.compscitech.2016.07.020 ↗
30. Experimental dynamic analysis of polymer-based nanocomposite beams under low-velocity impact loading10.1007/s13726-017-0572-7 ↗
31. Some properties of starch/epoxy composites
32. Impact analysis of fabric reinforced plates
33. European Standard EN ISO 6603-1:2000, (n.d.).
34. European Standard EN ISO 6603-2:2000, (n.d.).
35. Low velocity impact tests of laminate glass-fiber-epoxy matrix composite material plates10.1016/S0734-743X(01)00040-9 ↗
36. Studies on the low-velocity impact response of woven hybrid composites10.1016/j.compstruct.2004.07.024 ↗
37. Horrocks · 2015
38. Energy absorption and bending stiffness in CFRP laminates: the effect of 45° plies10.1016/j.tws.2008.01.024 ↗
39. Comparison of mechanical and ballistic performance of composite laminates produced from single-layer and double-layer interlocked woven structures10.1002/pc.22811 ↗
40. Low velocity impact behavior of glass filled fiber-reinforced thermoplastic engine components10.3390/ma3042463 ↗
41. Impact response of hybrid carbon/glass fibre reinforced polymer composites designed for engineering applications10.1016/j.compositesb.2017.09.026 ↗
42. Delamination prediction in composite laminates under low-velocity impact10.1016/j.compstruct.2015.05.037 ↗