Electromagnetic interference shielding, mechanical properties and water absorption of copper/bamboo fabric (Cu/BF) composites
Source abstract
Abstract
Abstract Copper/bamboo fabric (Cu/BF) composites were prepared by electroless deposition via a tin-free process. The process involved 3-aminopropyltrimethoxysilane modification, noble metal (Au or Pd) activation and electroless copper planting of BF. The copper deposition rate via Pd catalytic process was 1.01 mg/cm 2 h, higher than that by Au catalytic process (0.85 mg/cm 2 h). The microstructure of Cu/BF composites was analyzed by scanning electron microscopy (SEM), and the copper coatings were composed of ball-shaped copper particles. The composition and chemical state of copper layers were measured by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) spectra, Cu 0 was detected but copper dioxide was not found in both spectra. The electromagnetic interference, water absorption, mechanical tension, conductivity and adhesion properties of Cu/BF samples (weight ratio of Cu/BF: 0.36 ± 0.01) were measured to obtain the qualities of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Electromagnetic wave absorption materials · Material Selection and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. New commercial fibres called ‘Bamboo Fibres’ – their structure and properties
2. Bamboo: an overlooked biomass resource?10.1016/S0961-9534(00)00038-6 ↗
3. Single bath process for imparting antimicrobial activity and ultraviolet protective property to bamboo viscose fabric10.1007/s10570-009-9299-8 ↗
4. Surface properties of bamboo fiber and a comparison with cotton linter fibers10.1016/j.colsurfb.2004.04.002 ↗
5. Fabrication and testing of natural fibre composites: vakka, sisal, bamboo and banana10.1016/j.matdes.2009.06.023 ↗
6. The electromagnetic shielding of Ni films deposited on cenosphere particles by magnetron sputtering method10.1016/j.jmmm.2009.04.040 ↗
7. Comparative study of electroless Ni–P, Cu, Ag, and Cu–Ag plating on polyamide fabrics10.1177/1528083710387176 ↗
8. Adhesion enhancement between electroless nickel and polyester fabric by a palladium-free process10.1016/j.apsusc.2010.10.129 ↗
9. A tin-free catalyst for electroless platinum deposition on polyethyleneterephthalate10.1023/A:1006533722671 ↗
10. Electroless plating of copper and nickel via a Sn-free process on polyimide films modified by surface graft copolymerization with 1-vinylimidazole10.1149/1.1387237 ↗
11. An alternative process for electroless copper plating on polyester fabric10.1007/s10854-008-9594-4 ↗
12. Tin-free electroless metallization of glass substrates using different PACVD surface treatment processes10.1016/S0257-8972(02)00382-1 ↗
13. Palladium (+2) reduction: a key step for the electroless Ni metallization of insulating substrates by a tin-free process10.1016/j.tsf.2006.05.032 ↗
14. Effect of fibre surface modification on water-sorption characteristics of oil palm fibres10.1016/S0266-3538(02)00270-1 ↗
15. Selective electroless metallization of patterned polymeric films for lithography applications10.1021/am800121d ↗
16. Effect of chemical treatments on water sorption and mechanical properties of flax fibres10.1016/j.biortech.2009.04.067 ↗
17. Effect of chemical treatments of Alfa (Stipa tenacissima) fibres on water-sorption properties10.1016/j.compscitech.2006.04.013 ↗
18. Platinum colloid catalyzed etchingless gold electroless plating with strong adhesion to polymers10.1016/j.surfcoat.2010.04.064 ↗
19. Electroless deposition and electrical resistivity of sub-100nm Cu films on SAMs: state of the art10.1016/j.mee.2007.05.032 ↗
20. Enhancement of tensile strength of lignocellulosic jute fibers by alkali-steam treatment10.1016/j.biortech.2009.12.010 ↗
21. Adhesion promoting polymer interlayers for Ag layers deposited in OLED processing10.1163/016942409X12619870771466 ↗
22. Razic SE determining pseudo poisson’s ratio of woven fabric with a digital image correlation method10.1177/0040517509104316 ↗
23. The poisson ratio and modulus of elastic knitted fabrics10.1177/0040517510371864 ↗
24. EMI Shielding: methods and materials – a review10.1002/app.29812 ↗
25. Wetting behaviour and surface properties of technical bamboo fibres10.1016/j.colsurfa.2011.02.032 ↗
26. A study on drying of textile substrates and a new concept for the enhancement of drying rate10.1080/00405000902732776 ↗
27. A kinetic study of moisture sorption and desorption on lyocell fibers10.1016/j.carbpol.2004.07.004 ↗
28. Synthesis and mechanical characterisation of cellulose based textiles grafted with acrylic monomers10.1016/j.eurpolymj.2005.08.005 ↗
29. Structure and saccharification of rice straw pretreated with sulfur trioxide micro-thermal explosion collaborative dilutes alkali10.1016/j.biortech.2011.02.073 ↗
30. Study of mechanism of electroless copper coating of fly-ash cenosphere particles10.1016/S0169-4332(01)00341-5 ↗
31. Assessment of the tensile properties of coir, bamboo and jute fibre10.1016/j.compositesa.2010.01.005 ↗
32. Electroless deposition and electrical resistivity of sub-100nm Cu films on SAMs: state of the art10.1016/j.mee.2007.05.032 ↗