Flexural and impact properties of all-cellulose composite laminates
Source abstract
Abstract
Abstract All-cellulose composites (ACCs) represent a class of biocomposite that are entirely synthesised from cellulose, resulting in a matrix and reinforcing phase that are chemically identical. The flexural strength, puncture impact strength and unnotched Charpy impact strength of ACC laminates are reported for the first time and compared with conventional biocomposites. In this study, the flexural and impact properties of ACC laminates based solely on a rayon textile were investigated. It is observed that all-cellulose composite laminates exceed the impact properties of most conventional biocomposites. A high level of fibre–matrix adhesion was observed to hinder interlaminar failure. The unique combination of high flexural and impact strength of ACC laminates demonstrates the potential of ACC laminates as a new class of biocomposite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Advanced Cellulose Research Studies · Electrospun Nanofibers in Biomedical Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. The mechanical efficiency of natural materials10.1080/14786430410001680935 ↗
2. Natural fibres: can they replace glass in fibre reinforced plastics?10.1016/S0266-3538(03)00096-4 ↗
3. A review on interface modification and characterization of natural fiber reinforced plastic composites10.1002/pen.10846 ↗
4. Fibre–matrix adhesion and its relationship to composite mechanical properties10.1007/BF01151234 ↗
5. A critical review of all-cellulose composites10.1007/s10853-011-5774-3 ↗
6. All-cellulose composite10.1021/ma049300h ↗
7. All-cellulose nanocomposite10.1016/j.polymer.2005.08.040 ↗
8. Changes in the molecular orientation and tensile properties of uniaxially drawn cellulose films10.1021/bm060698u ↗
9. Properties of films composed of cellulose nanowhiskers and a cellulose matrix regenerated from alkali/urea solution10.1021/bm9001975 ↗
10. The effect of fibre volume fraction and mercerization on the properties of all-cellulose composites10.1016/j.carbpol.2007.06.019 ↗
11. Preparation, structure and mechanical properties of all-hemp cellulose biocomposites10.1016/j.compscitech.2009.05.005 ↗
12. All-cellulose composite prepared by selective dissolving of fiber surface10.1021/bm0703416 ↗
13. All-cellulose composites of regenerated cellulose fibres by surface selective dissolution
14. All-cellulose composites prepared from flax and lyocell fibres compared to epoxy–matrix composites10.1016/j.compscitech.2012.05.011 ↗
15. Solution studies of cellulose in lithium chloride and N, N-dimethylacetamide10.1021/ma00154a010 ↗
16. Johnson D. Process for strengthening swellable fibrous material with an amine oxide and the resulting material. United States Patent 3447956; 1969.
17. Dissolution of cellose with ionic liquids10.1021/ja025790m ↗
18. Ionic liquids and their interaction with cellulose10.1021/cr9001947 ↗
19. All-cellulose composites by surface selective dissolution of aligned ligno-cellulosic fibres10.1016/j.compscitech.2008.03.023 ↗
20. Natural-fibre composites in structural applications
21. Verstärkung aus der natur=natural reinforcement
22. Impact and tensile properties of PLA/Cordenka and PLA/flax composites10.1016/j.compscitech.2008.01.004 ↗
23. Improvement of the mechanical properties of biodegradable hemp fiber reinforced poly (lactic acid)(PLA) composites by the admixture of man-made cellulose fibers10.1177/0021998308100688 ↗
24. Wunderlich D, Zimmerer B. Technical Rayon: Present and Future. 50th Dornbirn Man-Made Fibers Congress, Dornbirn, Austria; 2011.
25. Solvent infusion processing of all-cellulose composite materials10.1016/j.carbpol.2012.05.047 ↗
26. The low velocity impact response of non-woven hemp fibre reinforced unsaturated polyester composites10.1016/j.compstruct.2006.10.003 ↗
27. Huber, T. Processing of all cellulose composites via an ionic liquid route. University of Canterbury (NZ). Mechanical Engineering; 2013.
28. Penetration impact resistance of hybrid composites based on commingled yarn fabrics10.1016/S0266-3538(02)00233-6 ↗
29. Faur-Csukat · 2007 · vol. 537
30. Fully biodegradable natural fiber composites from renewable resources: all-plant fiber composites10.1016/j.compscitech.2005.06.018 ↗
31. Tensile, flexural and interlaminar shear properties of woven jute and jute-glass fabric reinforced polyester composites10.1016/j.jmatprotec.2008.06.038 ↗
32. Some mechanical properties of untreated jute fabric-reinforced polyester composites10.1016/S1359-835X(98)00157-2 ↗
33. Adusumali · 2006 · vol. 244
34. Biofibres, biodegradable polymers and biocomposites: an overview10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W ↗
35. Structure formation of regenerated cellulose materials from NMMO-solutions10.1016/S0079-6700(01)00025-9 ↗
36. Zugenmaier P. Überlegungen zur Symmetrie und Packung von kristallinen Cellulosen und Modell-verbindungen. 4 internationales Symposium “Werkstoffe aus Nachwachsenden Rohstoffen”; 2003.
37. All-cellulose composite laminates10.1016/j.compositesa.2012.04.017 ↗
38. Structure-property relationship of all-cellulose composites10.1016/j.compscitech.2009.02.027 ↗
39. Natural fiber composites with plant oil-based resin10.1016/j.compscitech.2003.09.024 ↗
40. Preparation of thermoset composites from natural fibres and acrylate modified soybean oil resins10.1002/app.30773 ↗
41. Sheet molded polyolefin natural fiber composites for automotive applications10.1002/mame.200350002 ↗
42. Mechanical behavior of isothalic polyester-based untreated woven jute and glass fabric hybrid composites10.1177/0731684406066747 ↗
43. Development of flax fibre based textile reinforcements for composite applications10.1007/s10443-006-9010-2 ↗
44. Adekunle K, Åkesson D, Skrifvars M. Biobased composites prepared by compression moulding using a novel Thermoset Resin from soybean oil and a natural fibre reinforcement. International conference on composite matierials (ICCM 17) Edinburgh; 2009.10.1002/app.31634 ↗
45. Tensile, flexural and impact properties of jute fibre-based thermosetting composites10.1179/174328905X66199 ↗
46. Effect of chemical surface modifications on the properties of woven banana-reinforced unsaturated polyester composites10.1177/0731684408090366 ↗