journal article·2013-03

Silica nanoparticles as coupling agents for polypropylene/glass composites

Diego Pedrazzoli, Alessandro Pegoretti

Publisher page

Abstract

Abstract An evaluation of the fibre/matrix interfacial shear strength was performed by the single-fibre fragmentation tests on polypropylene–glass fibre microcomposites filled with various types and amounts of silica nanoparticles. In particular, both non-functionalized and dimethyldichlorosilane-functionalized silica nanoparticles were added up to a weight content of 7%. Moreover, the effect of various amounts of maleic anhydride modified polypropylene (PPgMA) on the fibre/matrix adhesion was also investigated, including some selected formulations containing both PPgMA and silica nanoparticles. Interfacial shear strength was found to remarkably increase (up to a factor of about 5 for a 7 wt% content of surface treated nanoparticles) with respect to the case of neat polypropylene matrix. The observed effect was explained by considering that silica nanoparticles increase the work of adhesion of polypropylene with respect to glass, as proven by contact angle measurements in different liquids. In addition, silica nanoparticles promoted a remarkable enhancement of both elastic modulus and creep stability of the selected polypropylene matrix.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Graphene research and applications · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Matrix-dominated properties of polymer matrix composite materials10.1016/0921-5093(94)91030-8 ↗
2. Kim · 1998
3. Karger-Kocsis · 1999
4. Interface behavior in polypropylene composites10.1177/089270503038223 ↗
5. Coupling ability of silane grafted poly(propene) at glass fibres/poly(propene) interface10.1016/j.compositesa.2003.10.001 ↗
6. Effects of crystallinity and supermolecular formations on the interfacial shear strength and adhesion in GF PP composites10.1007/BF00300131 ↗
7. Interface properties and their influence on short fibre composites10.1016/0010-4361(90)90437-2 ↗
8. Influence of an optimized interphase on the properties of polypropylene/glass fibre composites10.1016/1359-835X(96)00044-9 ↗
9. An investigation of glass–fibre polypropylene interface strength and its effect on composite properties10.1016/0010-4361(94)90017-5 ↗
10. Interfacial properties of fibre-reinforced composites10.1007/BF00545467 ↗
11. A novel technique for the interfacial characterisation of glass fibre–polypropylene systems10.1016/S0142-9418(03)00039-4 ↗
12. Glass fibre reinforced polypropylene mechanical properties enhancement by adhesion improvement10.3390/ma5061084 ↗
13. The use of a mixed coupling agent system to improve the performance of polypropylene-based composites reinforced with short-glass–fibre mat10.1016/S0266-3538(97)00086-9 ↗
14. Interfacial strength in glass fibre–polypropylene composites: influence of chemical bonding and physical entanglement10.1163/156855402760194719 ↗
15. Studies on the interface of glass fibre-reinforced polypropylene composite10.1163/156855402760194683 ↗
16. Strengthening of polypropylene–glass fibre interface by direct metallocenic polymerization of propylene onto the fibres10.1016/j.compositesa.2008.09.018 ↗
17. Interface strength in glass fibre–polypropylene measured using the fibre pull-out and microbond methods10.1016/j.compositesa.2009.10.005 ↗
18. Interfacial strength in glass fibre–polypropylene composites: influence of chemical bonding and physical entanglement10.1163/156855402760194719 ↗
19. Role of film formers in glass fibre reinforced polypropylene – new insights and relation to mechanical properties10.1016/S1359-835X(00)00156-1 ↗
20. Effect of nanoclay addition on the fibre/matrix adhesion in epoxy/glass composites10.1177/0021998311420311 ↗
21. Experimental study on adhesion property of UHMWPE fibre/nano-epoxy by fibre bundle pull-out tests10.1016/j.compscitech.2006.03.005 ↗
22. Fibre–matrix adhesion in glass–fibre reinforced polyamide-6 silicate nanocomposites10.1016/S1359-835X(04)00186-1 ↗
23. Effect of colloidal silica on the strength and energy absorption of glass fibre/epoxy interphases10.1016/j.compositesa.2011.07.029 ↗
24. Nanocomposite coatings for healing surface defects of glass fibres and improving interfacial adhesion10.1016/j.compscitech.2007.10.009 ↗
25. Application of nanomaterials in sizings for glass fibre/polypropylene hybrid yarn spinning10.1179/175355509X418016 ↗
26. Monitoring the mechanical behaviour under ramp and creep conditions of electrically conductive polymer composites10.1016/j.compositesa.2012.03.019 ↗
27. Linear low-density polyethylene – silica micro- and nanocomposites: dynamic rheological measurements and modeling10.3144/expresspolymlett.2010.16 ↗
28. Toughness of the fibre/matrix interface in nylon-6/glass fibre composites10.1016/S1359-835X(97)00079-1 ↗
29. Interfacial stress transfer in nylon-6/E-glass microcomposites: effect of temperature and strain rate10.1002/pc.10202 ↗
30. Tensile properties of fibre-reinforced metals: copper/tungsten and copper/molybdenum10.1016/0022-5096(65)90035-9 ↗
31. The elasticity and strength of paper and other fibrous materials10.1088/0508-3443/3/3/302 ↗
32. Wu · 1892
33. Fridman A. Plasma Chemistry. New York; 2008.10.1017/CBO9780511546075 ↗
34. A conveyor belt model for the dynamic contact angle10.1088/0143-0807/32/4/015 ↗
35. Evaluation of the statistical parameters of a Weibull distribution10.1023/A:1018603118573 ↗
36. Interfacial shear strength and failure modes in sPP/CF and iPP/CF microcomposites by fragmentation10.1016/S0032-3861(00)00354-2 ↗
37. Effect of temperature and strain rate on interfacial shear stress transfer in carbon/epoxy model composites10.1016/0266-3538(94)00069-7 ↗
38. Interfacial stress transfer in nylon-g/e-glass microcomposites: effect of temperature and strain rate10.1002/pc.10202 ↗
39. Why the fibre/polymer interface can appear to be stronger than the polymer matrix10.1016/S0266-3538(96)00151-0 ↗
40. Garbassi · 1998
41. Uber das fehlen einer korrelation zwisehen der admision und benetzung yon substraten dureh das polymere adhaisiv10.1007/BF01559350 ↗
42. Investigation of the influence of acidic and basic surface groups on carbon fibres on the interfacial shear strength in an epoxy matrix by means of single-fibre pull-out test10.1016/S0266-3538(00)00239-6 ↗
43. Thermo-mechanical properties of high density polyethylene – fumed silica nanocomposites: effect of filler surface area and treatment10.1007/s10965-012-9889-2 ↗
44. Nonlinear tensile creep of linear low density polyethylene/fumed silica nanocomposites: time-strain superposition and creep prediction10.1002/pc.20993 ↗