journal article·2013-08

Chemical grafting for improved interfacial shear strength in UHMWPE/PVA-hydrogel fiber-based composites used as soft fibrous tissue replacements

Julianne L. Holloway, Anthony M. Lowman, Mark R. VanLandingham, Giuseppe R. Palmese

Publisher page

Abstract

Fiber-reinforced hydrogel composites offer a unique advantage for soft fibrous tissue applications due to their ability to reproduce the anisotropic property distribution present within these tissues. As for many composite materials, the fiber–matrix interface of hydrogel composites can severely limit composite performance. In particular, the fiber–hydrogel interface for poly(vinyl alcohol) (PVA) hydrogel composites reinforced with ultra high molecular weight polyethylene (UHMWPE) fibers was extremely poor due to the innate hydrophobicity of UHMWPE. To improve interfacial adhesion, a novel biocompatible PVA grafting technique utilizing oxygen plasma treatments to activate fiber surfaces was developed to form a direct covalent linkage at the fiber–matrix interface. Grafting was confirmed via scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). Chemical grafting was tailored as a function of the number of sites available for covalent bonding and the percentage of sites reacted. Interfacial adhesion was determined for a range of grafting conditions using a single fiber pull-out test. PVA grafting resulted in significant improvements to interfacial shear strength from 11 kPa without any treatment to above 220 kPa following grafting. In some cases after grafting, failure was observed in tension within the fibers indicating the UHMWPE–PVA interface was successfully optimized. The results of this study can be used as a model for developing similar grafting techniques for other hydrogel-based composite systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrospun Nanofibers in Biomedical Applications · Natural Fiber Reinforced Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Structure and applications of poly (vinyl alcohol) hydrogels produced by conventional crosslinking or by freezing/thawing methods10.1007/3-540-46414-X_2 ↗
2. Superporous hydrogels for cartilage repair: evaluation of the morphological and mechanical properties10.1016/j.actbio.2007.09.001 ↗
3. Comparison of the bony ingrowth into an osteochondral defect and an artificial osteochondral composite device in load-bearing joints10.1016/S0968-0160(97)10001-1 ↗
4. A two year in vivo study of polyvinyl alcohol-hydrogel (PVA-H) artificial meniscus10.1016/j.biomaterials.2004.08.028 ↗
5. Functional compressive mechanics of a PVA/PVP nucleus pulposus replacement10.1016/j.biomaterials.2005.06.003 ↗
6. Poly(vinyl alcohol) hydrogel as a biocompatible viscoelastic mimetic for articular cartilage10.1021/bp060181u ↗
7. Mechanical property enhancement of semicrystalline polymers – a review10.1002/pen.760281303 ↗
8. Double-network hydrogels with extremely high mechanical strength10.1002/adma.200304907 ↗
9. True chemical structure of double network hydrogels10.1021/ma802148p ↗
10. Natural fiber polymer composites: a review10.1002/(SICI)1098-2329(199924)18:4<351::AID-ADV6>3.0.CO;2-X ↗
11. Nanofibrous biologic laminates replicate the form and function of the annulus fibrosus10.1038/nmat2558 ↗
12. Toughening of a brittle thermosetting polymer: effects of reinforcement particle size and volume fraction10.1023/A:1013844015493 ↗
13. A short review on rubber/clay nanocomposites with emphasis on mechanical properties10.1002/pen.20921 ↗
14. Small but strong: a review of the mechanical properties of carbon nanotube–polymer composites10.1016/j.carbon.2006.02.038 ↗
15. Fibrocartilage
16. Collagen orientations in the meniscus of the knee joint
17. Composites
18. Mechanical evaluation of poly(vinyl alcohol)-based fibrous composites as biomaterials for meniscal tissue replacement10.1016/j.actbio.2010.06.025 ↗
19. Pollard G, Tissington B, Ward IM. A study of the effects of oxygen plasma treatment on the adhesion behaviour of polyethylene fibres. Compos Sci Technol. 44(3): 1997, p. 185–95.10.1016/0266-3538(92)90011-Q ↗
20. Yim J. Tailoring interfacial performance of UHMWPE fiber composites via covalent bonding assisted by plasma surface treatments. In: PhD thesis, Drexel University; 2011. .
21. Functionalization of polymers using N2 pulsed dielectric barrier discharge
22. Factors affecting the interfacial adhesion of ultrahigh-modulus polyethylene fibre–vinylester composites using gas plasma treatment10.1023/A:1013205918208 ↗
23. Study of the effects of oxygen plasma treatment on the adhesion behaviour of polyethylene fibres10.1016/0266-3538(92)90011-Q ↗
24. Development of semicrystalline poly(vinyl alcohol) hydrogels for biomedical applications10.1002/jbm.820110309 ↗
25. Improving the adhesion of poly(ethylene terephthalate) fibers to poly(hydroxyethyl methacrylate) hydrogels by ozone treatment: surface characterization and pull-out tests10.1016/j.polymer.2005.08.033 ↗
26. The elasticity and strength of paper and other fibrous materials10.1088/0508-3443/3/3/302 ↗
27. Stress transfer in single-fibre composites: effect of adhesion, elastic modulus of fibre and matrix, and polymer chain mobility10.1007/BF01105713 ↗