journal article·2016-06Open access

Effect of volume-fraction dependent agglomeration of nanoparticles on the thermal conductivity of nanocomposites: Applications to epoxy resins, filled by SiO2, AlN and MgO nanoparticles

H. Machrafi, G. Lebon, C.S. Iorio

Abstract

Abstract A thermodynamic model for transient heat conduction in ceramic-polymer nanocomposites is proposed. The model takes into account particle’s size, particle’s volume fraction, and interface characteristics with emphasis on the effect of agglomeration of particles on the effective thermal conductivity of the nanocomposite. The originality of the present work is its basement on extended irreversible thermodynamics, combining nano- and continuum-scales without invoking molecular dynamics. The model is compared to experimental data using the examples of SiO 2 , AlN and MgO nanoparticles embedded in epoxy resin. The analysis is limited to spherical nanoparticles. The dependence of the degree of agglomeration with respect of the volume fraction of particles is also discussed and a power-law relation is established through a kinetic mechanism and experiments performed in our laboratory. This relation is used in our theoretical model, resulting into a good agreement with experiments. It is shown that the effective thermal conductivity may either increase or decrease with the degree of agglomeration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Nanofluid Flow and Heat Transfer · Heat Transfer and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Preparation and properties of polyimide/aluminum nitride composites10.1016/j.polymertesting.2004.03.005 ↗
2. Increasing the thermal conductivity of boron nitride and aluminum nitride particle epoxy-matrix composites by particle surface treatments10.1163/156855400750244969 ↗
3. Thermal conductivity of polymer nanocomposites made with carbon nanofibers10.1002/pen.21205 ↗
4. Comparative study of thermally conductive fillers for use in liquid encapsulants for electronic packaging10.1109/6040.746543 ↗
5. Thermal properties of composites filled with different fillers
6. High thermal conductive epoxy resins with controlled high-order structure [electrical insulation applications]
7. Development of highly thermoconductive epoxy composites
8. Thermal conductivity of nanocomposites with high volume fractions of particles10.1016/j.compscitech.2012.02.016 ↗
9. Phonon transport and thermal conductivity percolation in random nanoparticle composites
10. Effect of interface scattering on phonon thermal conductivity percolation in random nanowire composites10.1063/1.2751610 ↗
11. Thermal conductivity of simple and tubular nanowire composites in the longitudinal direction10.1103/PhysRevB.72.125418 ↗
12. Thermal boundary resistance of nanocomposites10.1016/j.ijheatmasstransfer.2005.04.034 ↗
13. Jou · 2010
14. Sulla conduzione del calore
15. Effective thermal conductivity of particulate composites with interfacial thermal resistance10.1063/1.365209 ↗
16. Modified effective medium formulation for the thermal conductivity of nanocomposites10.1063/1.2771040 ↗
17. Transverse thermal conductivity of fiber reinforced polymer composites10.1016/S0735-1933(00)00106-8 ↗
18. Predicting thermal conductivity of liquid suspensions of nanoparticles (nanofluids) based on rheology10.1016/j.partic.2009.01.005 ↗
19. Rheological behaviour of nanofluids10.1088/1367-2630/9/10/367 ↗
20. Modelling of the thermal conductivity in polymer nanocomposites and the impact of the interface between filler and matrix10.1088/0022-3727/44/39/395401 ↗
21. Thermal conductivity and particle agglomeration in alumina nano-fluids: experiment and theory
22. Rheological and flow characteristics of nanofluids: influence of electroviscous effects and particle agglomeration10.1063/1.3182807 ↗
23. Influence of particle-matrix interface, temperature, and agglomeration on heat conduction in dispersions10.1063/1.4812734 ↗
24. Maxwell · 1881
25. Effective thermal conductivity of composites with interfacial thermal barrier resistance10.1177/002199838702100602 ↗
26. Effective thermal conductivity of particulate composites with interfacial thermal resistance10.1063/1.365209 ↗
27. Thermal conductivity of heterogeneous two component systems10.1021/i160003a005 ↗
28. A fractal model for predicting the effective thermal conductivity of liquid with suspension of nanoparticles10.1016/S0017-9310(03)00016-4 ↗
29. Barnes · 1989
30. Goodwin · 2000
31. Effect of aggregation on thermal conduction in colloidal nanofluids10.1063/1.2360229 ↗
32. Thermal conductivity of graded composites: numerical simulations and an effective medium approximation10.1023/A:1004760427981 ↗
33. On nonlocal constitutive relations, continued fraction expansion for the wave vector dependent diffusion coefficient
34. Morphology effects on nonisotropic thermal conduction of aligned single-walled and multi-walled carbon nanotubes in polymer nanocomposites10.1021/jp102138c ↗
35. Phonon heat conduction in thin films: impacts of thermal boundary resistance and internal heat generation10.1115/1.1351169 ↗
36. Pulsed photothermal reflectance measurement of the thermal conductivity of sputtered aluminum nitride thin films10.1063/1.1785850 ↗
37. Properties of an infrared-transparent MgO: Y2O3 nanocomposite10.1111/jace.12589 ↗
38. Carter · 2007
39. Thermal conductivity and ballistic-phonon transport in the cross-plane direction of superlattices10.1103/PhysRevB.57.14958 ↗
40. Effective thermal conductivity of spherical particulate nanocomposites: comparison with theoretical models, monte Carlo simulations and experiments10.1142/S0219581X14500227 ↗
41. Effect of nanofillers dispersion in polymer matrices: a review10.1166/sam.2011.1136 ↗
42. Poly(ethylene terephthalate) clay nanocomposites: improved dispersion based on an aqueous ionomer10.1016/j.compscitech.2007.12.012 ↗
43. Determination of particle size distributions and the degree of dispersion in nanocomposites10.1016/j.compscitech.2012.03.010 ↗
44. Preparation and characterization of electrically and thermally conductive polymeric nanocomposites
45. Thermal behaviour of epoxy resin filled with high thermal conductivity nanopowders
46. Thermal conductivity enhancement of epoxy adhesive using graphene sheets as additives10.1016/j.ijthermalsci.2014.07.011 ↗
47. Thermal conductivity enhancement with different fillers for epoxy resin adhesives10.1016/j.applthermaleng.2014.02.044 ↗
48. Thermal conductivity improvement of epoxy composite filled with expanded graphite10.1016/j.ceramint.2015.07.148 ↗
49. Improving the thermal conductivity of epoxy resin by the addition of a mixture of graphite nanoplatelets and silicon carbide microparticles10.3144/expresspolymlett.2013.56 ↗
50. High thermal conductivity epoxy composites with bimodal distribution of aluminum nitride and boron nitride fillers10.1016/j.tca.2012.03.002 ↗
51. Exceptionally high thermal conductivity of thermal grease: synergistic effects of graphene and alumina10.1016/j.ijthermalsci.2015.01.006 ↗
52. Effect of aggregation kinetics on the thermal conductivity of nanoscale colloidal solutions (nanofluid)10.1021/nl060992s ↗
53. An extended irreversible thermodynamic modelling of size-dependent thermal conductivity of spherical nanoparticles dispersed in homogeneous media10.1098/rspa.2015.0144 ↗
54. Size effect on the thermal intensification of alumina-filled nanocomposites10.1177/0021998315624253 ↗
55. Surfactant (Bi)Layers on gold nanorods10.1021/la203451p ↗
56. Inhibiting, promoting, and preserving stability of functional protein fibrils10.1039/C1SM06643A ↗
57. Gold nanocluster agglomeration kinetic studies: evidence for parallel bimolecular plus autocatalytic agglomeration pathways as a mechanism-based alternative to an Avrami-based analysis10.1021/cm203186y ↗
58. A simple semi-empirical model for effective density measurements of fractal aggregates10.1016/j.jaerosci.2015.05.003 ↗
59. A simple effective flaw model on analyzing the nanofiller agglomeration effect of nanocomposite materials10.1155/2012/483093 ↗