Effect of aminated polyphenylene sulfide on the mechanical properties of short carbon fiber reinforced polyphenylene sulfide composites
Source abstract
Abstract
Abstract The aim of this study was to investigate the effect of the aminated polyphenylene sulfide (PPS-NH 2 ) used as compatibilizer on the mechanical properties of carbon fiber (CF) reinforced polyphenylene sulfide (PPS) composites. The compatibilizers PPS-NH 2 which were synthesized by the condensation polymerization of sodium sulfide (Na 2 S), p-dichlorobenzene (DCB), and the third active monomer 2,5-dichloroaniline (DCA). Composites with 20 wt% CF, 75 wt% PPS and 5 wt% PPS-NH 2 which were synthesized by different mole ratios of Na 2 S/DCB/DCA were prepared by melt blending and injection molding. According to the results of mechanical properties tests, dynamic mechanical analysis (DMA), microbond test (apparent interfacial shear strength, τ app ) and scanning electron microscopy (SEM), the compatibilizers PPS-NH 2 could improve the macro-mechanical properties and interfacial bonding between CF and PPS matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fiber-reinforced polymer composites · Tribology and Wear Analysis · Synthesis and properties of polymers
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiber10.1016/j.compscitech.2013.05.005 ↗
2. Morphology control of nanofillers in poly (phenylene sulfide): a novel method to realize the exfoliation of nanoclay by SiO2 via melt shear flow10.1016/j.compscitech.2012.11.006 ↗
3. Crystallization of glass fiber-reinforced poly (p-phenylene sulfide) nanocomposites10.1002/pi.3187 ↗
4. Energy absorption efficiency of carbon fiber reinforced polymer laminates under high velocity impact10.1016/j.matdes.2013.01.046 ↗
5. Investigating the effects of recycling number and injection parameters on the mechanical properties of glass-fibre reinforced nylon 6 using Taguchi method10.1016/j.matdes.2013.02.027 ↗
6. Hybrid carbon fibre–carbon nanotube composite interfaces10.1016/j.compscitech.2014.02.015 ↗
7. Modelling the nonlinear shear stress–strain behavior of a carbon fabric reinforced polyphenylene sulphide from rail shear and [(45°−45°)]4s tensile test10.1002/pc.20650 ↗
8. Tuning the properties of carbon fiber-reinforced poly (phenylene sulphide) laminates via incorporation of inorganic nanoparticles10.1016/j.polymer.2012.04.010 ↗
9. Carbon fiber fabric reinforced PPS laminates: influence of temperature on mechanical properties and behavior10.1002/adv.20239 ↗
10. Effect of thermal cycling on carbon fiber-reinforced PPS composites10.1002/pc.20148 ↗
11. Mechanical and interfacial properties of wood and bio-based thermoplastic composite10.1016/j.compscitech.2012.07.002 ↗
12. Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber reinforced polypropylene composites10.1016/j.matdes.2011.03.021 ↗
13. Interfacial enhancement of carbon fiber composites by poly (amido amine) functionalization10.1016/j.compscitech.2012.10.005 ↗
14. The surface analytical characterization of carbon fibers functionalized by H2SO4/HNO3 treatment10.1016/j.carbon.2007.11.002 ↗
15. Low-pressure plasma pretreatment of polyphenylene sulfide (PPS) surfaces for adhesive bonding10.1016/j.ijadhadh.2007.03.003 ↗
16. Plasma surface treatments of carbon fibers. Part 2: interfacial adhesion with poly (phenylene sulfide)10.1016/0266-3538(92)90117-L ↗
17. Effect of silane coupling agent on the tensile properties of carbon fiber-reinforced thermoplastic polyimide composites10.1080/03602550903414001 ↗
18. Mechanical and thermal properties of polymer composite based on natural fibers: moroccan hemp fibers/polypropylene10.1016/j.matdes.2013.01.063 ↗
19. The effect of maleic anhydride graft on the interfacial adhesion of carbon fiber reinforced thermoplastic polystyrene composite10.1177/0021998309345338 ↗
20. Xie M, Yan Y, Yu H, Chen Y, Wu Q. Industrial sulfide pressure method for preparing poly (arylene sulfide). Chinese Patent, CN1061667 C, February 7; 2001.
21. Shigeru A, Tsuyoshi I. Multilayer laminate. Chinese Patent, CN1910045, February 7; 2007.
22. Synthesis and characterization of nitrated and aminated poly (phenylene sulfide) derivatives for advanced applications10.1016/j.matchemphys.2011.10.025 ↗
23. Grafting of an aminated poly (phenylene sulphide) derivative to functionalized single-walled carbon nanotubes10.1016/j.carbon.2011.09.046 ↗
24. Towards the development of poly (phenylene sulphide) based nanocomposites with enhanced mechanical, electrical and tribological properties10.1016/j.matchemphys.2012.04.057 ↗
25. Yang J, Zhang G, Huang B, Long S, Wang X. A method of preparation the polyarylene sulfide film. Chinese Patent, CN 102127226. October 3; 2012.
26. Yang J, Zhang Q, Zhang K, Zhang G, Long S, Xiaojun W. A kind of reinforced Polyphenylene Sulfide composite and the preparation method. Chinese Patent, 201310572843.4; 2013.
27. Interfacial shear strength of carbon fiber reinforced polyphenylene sulfide measured by the microbond test10.1016/j.polymertesting.2013.03.020 ↗
28. Characterization of fiber/matrix interface strength: applicability of different tests, approaches and parameters10.1016/j.compscitech.2004.07.003 ↗
29. Effect of sizing on carbon fiber surface properties and fibers/epoxy interfacial adhesion10.1016/j.apsusc.2011.03.047 ↗
30. Chemical modification of carbon fiber surfaces10.1016/S0008-6223(01)00180-4 ↗
31. Reactivities of amine functions grafted to carbon fiber surfaces by tetraethylenepentamine. Designing interfacial bonding10.1016/S0008-6223(97)00047-X ↗
32. Development and evaluation of surface treatments to enhance the fiber–matrix adhesion in PAN-based carbon fiber/liquid crystal polymer composites. Part I: coupling agent and amine surface treatments10.1002/pc.750140404 ↗
33. Mechanical properties of silanized jute-polypropylene composites10.1016/j.jiec.2007.07.002 ↗
34. Dynamical mechanical analysis of sisal/oil palm hybrid fiber-reinforced natural rubber composites10.1002/pc.20250 ↗
35. Dynamic mechanical properties of oil palm microfibril-reinforced natural rubber composites10.1002/app.30960 ↗
36. Effect of fiber surface-treatments on the properties of poly (lactic acid)/ramie composites10.1016/j.compositesa.2009.12.006 ↗
37. Properties of polypropylene/hemp fibers flame-retardant composites: effects of different processing methods10.1177/0731684412472247 ↗
38. Dynamic mechanical and thermal properties of MAPE treated jute/HDPE composites10.1016/j.compscitech.2005.06.014 ↗
39. Adhesional pressure as a criterion for interfacial failure in fibrous microcomposites and its determination using a microbond test10.1016/j.compscitech.2006.03.023 ↗
40. Full recovery of fiber/matrix interfacial bond strength using a microencapsulated solvent-based healing system10.1016/j.compscitech.2013.02.007 ↗