Textile composite double dome stamping simulation using a non-orthogonal constitutive model
Source abstract
Abstract
Stamping is one of the most effective ways to form textile composites in industry for providing high-strength, low-weight and cost-effective products. This paper presents a fully continuum mechanics-based approach for stamping simulation of textile fiber reinforced composites by using finite element (FE) method. A previously developed non-orthogonal constitutive model is used to represent the anisotropic mechanical behavior of textile composites under large deformation during stamping. Simulation are performed on a balanced plain weave composite with 0°/90° and ±45° as initial yarn orientation over a benchmark double dome device. Simulation results show good agreement with experimental output in terms of a number of parameters selected for comparison. The effects of meshing and shear moduli obtained from bias extension test and picture frame test on forming simulation results are also investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Structural Analysis and Optimization · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A simulation of the draping of bi-directional fabrics over arbitrary surfaces10.1080/00405009008658722 ↗
2. Algorithms for draping fabrics on doubly curved surfaces10.1002/nme.1620310712 ↗
3. Forming of woven fabric composites10.1177/002199839402801805 ↗
4. A simplified finite element model for draping of woven material10.1016/j.compositesa.2004.02.013 ↗
5. Simplified and advanced simulation methods for prediction of fabric draping
6. Simulating the deformation mechanisms of knitted fabric composites10.1016/j.compositesa.2005.12.029 ↗
7. Discrete models of woven structures. Macroscopic approach10.1016/j.compositesb.2006.01.007 ↗
8. Non-orthogonal constitutive equation for woven fabric reinforced thermo-plastic composites10.1016/S1359-835X(02)00053-2 ↗
9. A non-orthogonal constitutive model for characterizing woven composites10.1016/S1359-835X(02)00052-0 ↗
10. An approach in modeling the temperature effect in thermo-stamping of woven composites10.1016/S0263-8223(03)00052-7 ↗
11. A continuum constitutive model for the mechanical behavior of woven fabrics10.1016/j.ijsolstr.2004.10.030 ↗
12. A continuum mechanics-based non-orthogonal constitutive model for woven composite fabrics10.1016/j.compositesa.2004.08.008 ↗
13. A multi-layer triangular membrane finite element for the forming simulation of laminated composites10.1016/j.compositesa.2009.03.004 ↗
14. Finite element modeling of fabric shear10.1088/0965-0393/17/1/015008 ↗
15. Analysis of the mechanical behaviour of woven fibrous material using virtual tests at the unit cell level10.1007/s10853-005-5069-7 ↗
16. Large deformation analysis of fibrous materials using rate constitutive equations10.1016/j.compstruc.2008.01.009 ↗
17. Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark10.1016/j.jmatprotec.2009.09.027 ↗
18. A hyperelastic approach for composite reinforcement large deformation analysis10.1177/0021998309345348 ↗
19. Woven Composites Benchmark Forum. [accessed 05.11.09].
20. Characterization of mechanical behavior of woven fabrics: experimental methods and benchmark results10.1016/j.compositesa.2008.02.016 ↗
21. Ogden · 1984
22. Analyses of fabric tensile behavior: determination of the biaxial tension-strain surfaces and their use in forming simulations10.1016/S1359-835X(01)00039-2 ↗
23. A dual homogenization and finite element approach for material characterization of textile composites10.1016/S1359-8368(01)00052-X ↗
24. Picture frame test of woven composite reinforcements with a full-field strain registration10.1177/0040517506061032 ↗
25. Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcements10.1016/j.compscitech.2007.06.021 ↗