Impact response of woven glass-fabric composites—II. Effect of temperature

1. Influence of silane coupling agents on interlaminar fracture in glass fibre fabric reinforced unsaturated polyester laminates10.1007/BF00595738 ↗

2. Bequiqnat, R., Krawczak, P., Cantwell, W., Schramuzzino, P., Desaeger, M., Verpoest, I., Hamada, H., Hirai, Y., Kotaki, M., Hojo, M., Kim, J. K., Kocsis, J. K., Mackin, T. J., Mayer, J., Morii, T. and Tanimoto, T., Influence of different glass fibre sizings on the mechanical properties of glass fabric composites: report on a round robin test. In Proceedings of 10th Int. Conf. on Composite Materials (ICCM-10), Whistler, Canada, 1995, pp. 597–603.

3. Kotaki, M., Hojo, M. and Hamada, H., Mode I interlaminar delamination behaviour and interfacial properties of glass woven fabric composites. In Proceedings, Society for Interfacial Materials Science of Composite Materials (SIMS-IV), Tokyo, Japan, 1995, pp. 105–108.

4. Bowles, K. J., The correlation of low-velocity impact resistance of glass fibre reinforced composites with matrix properties. In Composite Materials: Testing and Design (Eighth Conference), ASTM STP 972, ed. J. D. Whitcomb. American Society for Testing and Materials, Philadelphia, PA, 1988, pp. 124–142.10.1520/STP26131S ↗

5. Damage development and its significance in GRP subjected to impact

6. Instrumented dart impact evaluation of composite laminates for printed circuit board applications10.1007/BF00580160 ↗

7. Impact behaviour and damage tolerance of woven carbon fibre-reinforced thermoplastic composites10.1016/0010-4361(90)90008-K ↗

8. Low-speed impact damage-initiation characteristics of selected laminated composite plates10.2514/3.12746 ↗

9. Some experimental findings in compression after impact (CAI) tests of CF/PEEK (APC-2) and conventional CF/PEEK flat plates10.1016/0266-3538(95)00079-8 ↗

10. Damage modes in impact loading of glass woven fabric composites10.1177/096369359600500205 ↗

11. Impact response of glass woven fabric composites—I. Effect of fibre surface treatment10.1016/S0266-3538(97)00111-5 ↗

12. Davies, P. and Benzeggagh, M. L., Interlaminar mode I fracture testing. In Applications of Fracture Mechanics to Composite Materials, ed. K. Friedrich. Elsevier Science, Amsterdam, 1989, pp. 81–112.10.1016/B978-0-444-87286-9.50007-3 ↗

13. The effects of geometry, rate and temperature on the mode I, mode II and mixed mode I/II interlaminar fracture of carbon fibre/PEEK composites10.1177/002199839002400902 ↗

14. Failure mechanisms in carbon fibre-reinforced poly(ether sulphone)10.1016/0266-3538(92)90131-L ↗

15. Evans, R. E. and Masters, J. E., A new generation of epoxy composites for primary structural applications: materials and mechanics. In Toughened Composites, ASTM STP 937, ed. N. J. Johnston. American Society for Testing and Materials, Philadelphia, Pennsylvania, 1987, pp. 413–436.10.1520/STP24391S ↗

16. Bradley, W. L., The effect of resin toughness on delamination toughness and post-impact compression strength. In Proceedings of `Benibana' Int. Symp. on How to Improve the Toughness of Polymers and Composites—Toughness, Fracture and Fatigue of Polymers and Composites, Yamagata, Japan, 1990, pp. 221–230.

17. Levin, K., Effect of low-velocity impact on compression strength of quasi-isotropic laminate. In Proceedings of American Society for Composites: 1st Technical Conference. Technomic, Lancaster, PA, 1986, pp. 313–325.

18. Zimmerman, R. S. and Adams, D. F., Impact performance of various fibre reinforced composites as a function of temperature. In Proceedings of 32nd Int. SAMPE Symposium, Anaheim, CA, 1987, pp. 1461–1471.

19. High temperature damage tolerance of carbon fibre reinforced plastics: Part I. Impact characteristics10.1016/0010-4361(94)90097-3 ↗

20. Bibo, G. A., Hogg, P. J. and Kemp, M., High temperature damage tolerance of carbon fibre reinforced plastics: Part II. Impact compression characteristics. Composites, in press.

21. Effect of temperature and moisture on the impact behaviour of graphite/epoxy composites: Part 1—impact energy absorption10.1520/CTR10508J ↗

22. Effect of temperature and moisture on the impact behaviour of graphite/epoxy composites: Part 2—impact damage10.1520/CTR10509J ↗

23. Fracture toughness of CFRP with modified epoxy matrices10.1016/0266-3538(92)90099-O ↗

24. Impact performance of a woven fabric CFRP laminates10.1177/147823919600400803 ↗

25. Effects of interfacial coating and temperature on the fracture behaviours of unidirectional Kevlar and carbon fibre reinforced epoxy resin composites10.1007/BF00612409 ↗

26. Wardle, M. W. and Zahr, G. E. Instrumented impact testing of aramid-reinforced composite materials. In Instrumented Impact Testing of Plastics and Composite Materials, ASTM STP 936, ed. S. L. Kessler, G. C. Adams, S. B. Driscoll and D. R. Ireland. American Society for Testing and Materials, Philadelphia, PA, 1987, pp. 219–235.10.1520/STP19381S ↗

27. Beaumont, P. W. R., Riewald, P. G. and Zweben, C., Methods for improving the impact resistance of composite materials. In Foreign Object Impact Damage to Composites, ASTM STP 568. American Society for Testing and Materials, Philadelphia, PA, 1974, pp. 134–158.10.1520/STP33154S ↗

28. On the prediction of residual strength for notched laminates10.1007/BF00541829 ↗

29. Drop-weight impact damage tolerance of CFRP with rubber modified epoxy matrix10.1016/0010-4361(93)90018-4 ↗

30. A consistent engineering methodology for the treatment of impact in composite materials

31. Hogg, P., impact resistance—fibre reinforced polymers. In Handbook of Polymer–Fibre Composites, ed. F. R. Jones. Longman Scientific and Technical, Essex, UK, 1995, pp. 334–340.

32. Hirschbuehler, K. R., A comparison of several mechanical tests used to evaluate the toughness of composites. In Toughened Composites, ASTM STP 937, ed. N. J. Johnston. American Society for Testing and Materials, Philadelphia, PA, 1987, pp. 61–73.10.1520/STP24371S ↗