Three-phase polymer–ceramic–metal composite for embedded capacitor applications
Source abstract
Abstract
Abstract This paper addresses the materials and processes for printed wiring board compatible embedded capacitor using ceramic, polymer and metal. The Ca[(Li 1/3 Nb 2/3 ) 0.8 Ti 0.2 ]O 3− δ (CLNT)–epoxy–silver, three-phase composites were prepared by two step mixing and thermosetting technique. The dielectric properties of the three-phase composites were investigated in terms of volume fraction of silver, temperature and frequency. The dielectric properties of epoxy–CLNT composites were compared with theoretical predictions. The relative permittivity of the three-phase composites increased with silver loading. Addition of 0.28 volume fraction of silver increases the relative permittivity of epoxy–CLNT composites from 8 to 142 at 1 MHz. This composite is flexible and can be fabricated into various shapes with low processing temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric materials and actuators · Electromagnetic wave absorption materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Organic thin-film transistors with nanocomposite dielectric gate insulator10.1063/1.1806283 ↗
2. Novel polymer–ceramic nanocomposite based on high dielectric constant epoxy formula for embedded capacitor application10.1002/app.10082 ↗
3. Dielectric properties of polymer at microwave frequencies10.1016/0032-3861(85)90216-2 ↗
4. Sebastian · 2008
5. Novel ferroelectric polymer composites with high dielectric constant10.1002/adma.200304911 ↗
6. Enhanced dielectric and electromechanical response in high dielectric constant all-polymer percolative composites10.1002/adfm.200305021 ↗
7. Dielectric behavior of a metal–polymer composite with low percolation threshold10.1063/1.2337157 ↗
8. Enhanced electromechanical properties in all-polymer percolative composites10.1063/1.1702127 ↗
9. Experimental evidence of a giant capacitance in insulator–conductor composites at the percolation threshold10.1002/(SICI)1521-4095(200002)12:4<294::AID-ADMA294>3.0.CO;2-D ↗
10. New percolative BaTiO3–Ni composites with a high and frequency-independent dielectric constant (εr≈80000)10.1002/1521-4095(200110)13:20<1541::AID-ADMA1541>3.0.CO;2-X ↗
11. Giant permittivity of bismuth zinc niobate–silver composite10.1111/j.1551-2916.2007.01935.x ↗
12. Effect of interparticle distance and interfacial area on the properties of insulator–conductor composites10.1063/1.2807271 ↗
13. Effects of BaTiO3 on dielectric behavior of BaTiO3–Ni–polymethyl methacrylate composites10.1063/1.2354425 ↗
14. Dielectric behavior of lead zirconate titanate/silver composites10.1016/j.matchemphys.2005.08.034 ↗
15. Low-loss percolative dielectric composite10.1063/1.2032597 ↗
16. Effect of silver addition on the dielectric properties of barium titanate-based X7R ceramics10.1111/j.1151-2916.2003.tb03412.x ↗
17. Characterisation of barium titanate–silver composites part II: electrical properties10.1007/s10853-005-5162-y ↗
18. Effect of sintering temperature on the percolation threshold and the dielectric properties Ca[(Li1/3Nb2/3)1−xTix]O3−δ–Ag composite10.1016/j.compscitech.2008.04.022 ↗
19. Enhancement of dielectric and ferroelectric properties by addition of Pt particles to a lead zirconate titanate matrix10.1063/1.1325405 ↗
20. Percolation and conduction10.1103/RevModPhys.45.574 ↗
21. Critical behavior of the dielectric constant of a random composite near the percolation threshold10.1103/PhysRevLett.46.375 ↗
22. High dielectric constant ceramic powder polymer composite10.1063/1.126787 ↗
23. Low-temperature sintering and high-strength Pb(Zr,Ti)O3−δ matrix composites incorporating silver particles10.1111/j.1151-2916.1997.tb02901.x ↗
24. Dielectric characteristics of polymer–ceramic–metal composites for the application of embedded passive devices10.1080/10584580500413863 ↗
25. Dielectric behavior of three phase percolative Ni–BaTiO3/polyvinylidene fluoride composites10.1063/1.1529085 ↗
26. George S, Sebastian MT. Enhanced permittivity by the adhesion of conducting and low loss insulating ceramics in polystyrene. J Appl Polym Sci, in press.
27. Dielectric behavior of CCTO/epoxy and Al–CCTO/epoxy composites10.1016/j.compscitech.2007.01.010 ↗
28. Microwave dielectric properties of Ca[(Li1/3Nb2/3)1−xMx]O3−δ (M=Sn, Ti) Ceramics10.1557/JMR.1999.0483 ↗
29. Effective permittivity of dielectric mixture10.1109/36.3045 ↗
30. Effective dielectric constant of random composite material10.1063/1.364276 ↗
31. Numerical modeling of disordered mixture using pseudo random simulations10.1109/TGRS.2004.839804 ↗
32. A precise numerical prediction of effective dielectric constant for polymer ceramic composite based on effective medium theory10.1109/6144.888853 ↗
33. Preparation, characterization and dielectric properties of temperature stable SrTiO3/PEEK composites for microwave substrate applications10.1016/j.compscitech.2007.05.024 ↗
34. Low dielectric loss polytetrafluoroethylene/TeO2 polymer ceramic composites10.1111/j.1551-2916.2007.01914.x ↗
35. Percolation effects and sum rules in the optical properties of composites10.1103/PhysRevB.19.1783 ↗
36. Characterizing the interphase dielectric constant of polymer composite materials: effect of chemical coupling agents10.1063/1.1604961 ↗
37. Next generation integral passives: materials, processes, and integration of resistors and capacitors on PWB substrates10.1023/A:1008913403211 ↗
38. Effective dielectric constant of a metal-dielectric composite10.1103/PhysRevB.30.1008 ↗
39. Three-phase percolative silver–BaTiO3–epoxy nanocomposites with high dielectric constants10.1002/app.23739 ↗
40. Critical behaviour of conductivity and dielectric constant near the metal–nonmetal transition threshold10.1002/pssb.2220760205 ↗
41. Physics of inhomogeneous inorganic materials10.1016/0079-6425(93)90004-5 ↗