Influence of fibre volume fraction on mode II interlaminar fracture toughness of glass/epoxy using the 4ENF specimen
Source abstract
Abstract
Glass reinforced composites are used in many structural applications. Their fibre content can vary considerably according to the manufacturing route, typically from 30% to 70% by volume. This paper presents results from an experimental study of the influence of fibre volume fraction on the mode II interlaminar fracture toughness, G(IIc), using the 4ENF (four point end notched flexure) specimen. Results show that G(IIc) increases with decreasing fibre content. This effect is caused by plastic deformation energy dissipation in the thicker resin-rich interlaminar layer in lower fibre content composites.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Optical measurement and interference techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Davies P, Blackman BRK, Brunner AJ. Mode II delamination. In: Moore DR, Pavan A, Williams JG, editors. Fracture testing methods for polymers, adhesives and composites. ESIS Publication 28, Elsevier; 2001. p. 307–3410.1016/S1566-1369(01)80039-X ↗
2. Mode II stress intensity factors for cracked wood beams10.1016/0013-7944(77)90029-7 ↗
3. Russell AJ, Street KN. Factors affecting the interlaminar fracture energy of graphite/epoxy laminates. In: Hayashi T, Kawata K, Umekawa S, editors. Proceedings of the ICCM-IV, Tokyo, 1982, 279
4. Martin RH, Davidson B. Mode II fracture toughness evaluation using a four point bend end notched flexure test. In: Proceedings of the 4th international deformation and fracture of composites conference (DFC4). London: Published by Institute of Materials; March 1997. p. 243–52
5. Martin RH. Protocol for the determination of the mode II delamination resistance of unidirectional fiber reinforced polymer matrix composites using the four point bend end notched flexure (4ENF) specimen, MERL, reference 8-1-98. Protocol used for VAMAS Round robin tests; 1998
6. Comparison of test configurations for determination of mode II interlaminar fracture toughness results from international collaborative test programme10.1179/146580199101540600 ↗
7. Kageyama K, Kimpara I, Suzuki T, Ohsawa H, Kanai M, Tsuno H. Effects of test conditions on mode II interlaminar fracture toughness of four-point ENF specimens, Proceedings of the ICCM-12, Paris; July 1999. p. 362
8. Evaluation of the accuracy of the four point bend edge notched flexure test for mode II delamination toughness determination10.1016/S0266-3538(00)00113-5 ↗
9. Matrix resin effects in composite delamination: mode I fracture aspects
10. Influence of fiber volume fraction on mode III interlaminar fracture toughness of glass/epoxy composites10.1016/j.compscitech.2003.10.008 ↗
11. Shear fracture10.1007/BF00041716 ↗
12. Fracture of laminated composites with interleaves