Electrically conductive adhesives based on thermoplastic polyurethane filled with silver flakes and carbon nanotubes
Source abstract
Abstract
Abstract Flexible conductive adhesive could be used in flexible device electronic packaging. In this study, carbon nanotubes (CNTs) were used as one-dimensional conductive scaffolds to construct effective electrical networks among the silver flakes in electrically conductive adhesives (ECAs) for saving noble metal fillers and reducing the cost because CNTs used as conductivity fillers could bridge the neighboring silver flakes to accelerate the electron transport. The electrical, mechanical, and thermal properties have been enhanced after adding CNTs. The electrical conductivity increased 85.6% after 4.5 wt% CNT added into the 50 wt% Ag TPU adhesives. In addition, after the Ag flakes modified by succinic acid (SA), the electrical conductivity has also been improved. The development of highly conductive, flexible, and low cost ECAs will allow them to be widely used in flexible electronic devices packaging in the future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Carbon Nanotubes in Composites · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Flexible high-performance carbon nanotube integrated circuits10.1038/nnano.2011.1 ↗
2. Flexible organic transistors and circuits with extreme bending stability
3. Heterogeneous three-dimensional electronics by use of printed semiconductor nanomaterials10.1126/science.1132394 ↗
4. Surface functionalized silver nanoparticles for ultrahigh conductive polymer composites10.1021/cm0527773 ↗
5. Electronics without lead10.1126/science.1110168 ↗
6. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
7. Replacing copper wires with carbon nanotube wires in electrical transformers10.1002/adfm.201302497 ↗
8. High-performance carbon nanotube fiber10.1126/science.1147635 ↗
9. DC and AC conductivity of carbon nanotubes-polyepoxy composites10.1021/ma021263b ↗
10. Carbon nanotubes: present and future commercial applications10.1126/science.1222453 ↗
11. Probing electrical transport in nanomaterials: conductivity of individual carbon nanotubes10.1038/384147a0 ↗
12. Thermal and electrical transport in multi-walled carbon nanotubes10.1016/j.physleta.2004.05.070 ↗
13. Graphene/polymer nanocomposites for improved gas barrier and electrical conductivity10.1021/ma100572e ↗
14. Electrically conductive adhesives with a focus on adhesives that contain carbon nanotubes10.1002/app.39137 ↗
15. Method for reducing contact resistivity of carbon nanotube-containing epoxy adhesives for aerospace applications10.1016/j.compscitech.2010.10.016 ↗
16. Tackiness of an electrically conducting polyurethane–nanotube nanocomposite10.1016/j.ijadhadh.2010.05.011 ↗
17. Carbon nanotubes and silver flakes filled epoxy resin for new hybrid conductive adhesives10.1016/j.microrel.2011.03.020 ↗
18. Conductivity mechanisms of isotropic conductive adhesives (ICAs)
19. Conductivity of silver paste prepared from nanoparticles10.1016/j.colsurfa.2007.04.147 ↗
20. Review of recent advances in electrically conductive adhesive materials and technologies in electronic packaging10.1163/156856108X320519 ↗
21. Electrical conductivity of PUR/MWCNT nanocomposites in the molten state, during crystallization and in the solid state10.1016/j.eurpolymj.2011.07.026 ↗
22. Highly conductive, printable and stretchable composite films of carbon nanotubes and silver10.1038/nnano.2010.232 ↗
23. Carbon-nanotube/silver networks in nitrile butadiene rubber for highly conductive flexible adhesives10.1002/adma.201201273 ↗
24. A drastic reduction in silver concentration of metallic ink by the use of single-walled carbon nanotubes decorated with silver nanoparticles10.1039/c1jm10850f ↗
25. Electrical property improvement of electrically conductive adhesives through in-situ replacement by short-chain difunctional acids10.1109/TCAPT.2006.870388 ↗
26. Electrical property improvement of dicyandiamide-cured electrically conductive adhesives through in-situ replacement by difunctional acids and the impact on storage10.1016/j.ijadhadh.2013.05.006 ↗
27. A study of lubricants on silver flakes for microelectronics conductive adhesives10.1109/6144.796536 ↗
28. Electrically conductive adhesive based on acrylate resin filled with silver plating graphite nanosheet10.1016/j.synthmet.2011.01.004 ↗
29. Investigation of nanographite/polyurethane electroconductive adhesives: preparation and characterization10.1163/016942409X12508517390950 ↗
30. Unusually high thermal conductivity of carbon nanotubes10.1103/PhysRevLett.84.4613 ↗
31. Curing of epoxy/carbon nanotubes physical networks10.1002/pen.22131 ↗
32. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
33. Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites10.1016/j.polymer.2006.01.029 ↗
34. Dispersion, hybrid interconnection and heat dissipation properties of functionalized carbon nanotubes in epoxy composites for electrically conductive adhesives (ECAs)10.1016/j.microrel.2010.11.005 ↗
35. Effect of CNT decoration with silver nanoparticles on electrical conductivity of CNT-polymer composites10.1016/j.carbon.2008.06.048 ↗