Mechanical strength predictability of full factorial, Taguchi, and Box Behnken designs: Optimization of thermal settings and Cellulose Nanofibers content in PA12 for MEX AM
Source abstract
Abstract
Optimization of reinforced nanocomposites for MEX 3D-printing remain strong industrial claims. Herein, the efficacy of three modeling methods, i.e., full factorial (FFD), Taguchi (TD), and Box-Behnken (BBD), on the performance of MEX 3D printed nanocomposites was investigated, aiming to reduce the experimental effort. Filaments of medical-grade Polyamide 12 (PA12) reinforced with Cellulose NanoFibers (CNF) were evolved. Besides the CNF loading, 3D printing settings such as Nozzle (NT) and Bed (BΤ) Temperatures were optimization goals aiming to maximize the mechanical response. Three parameters and three levels of FFD were compliant with the ASTM-D638 standard (27 runs, five repetitions). An L9 orthogonal TD and a 15 runs BBD were compiled. In FFD, wt.3%CNF, 270 °C NT, and 80 °C BΤ led to 24% higher tensile strength compared to pure PA12. TGA, RAMAN, and SEM analyses interpreted the reinforcement mechanisms. TD and BBD exhibited fair approximations, requiring 7.4% and 11.8% of the FFD experimental effort.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Natural Fiber Reinforced Composites · biodegradable polymer synthesis and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Performance optimization of 3D printed polyamide 12 via Multi Jet Fusion: a Taguchi grey relational analysis (TGRA)
2. Mechanical and cytotoxicity properties of hybrid ceramics filled polyamide 12 filament feedstock for craniofacial bone reconstruction via fused deposition modelling10.1016/j.dental.2018.09.006 ↗
3. In situ mineralization of nano-hydroxyapatite on bifunctional cellulose nanofiber/polyvinyl alcohol/sodium alginate hydrogel using 3D printing10.1016/j.ijbiomac.2020.05.181 ↗
4. Sustainable design guidelines for additive manufacturing applications10.1108/RPJ-09-2021-0251 ↗
5. Investigating the effect of fused deposition modeling processing parameters using Taguchi design of experiment method10.1016/j.jmapro.2018.09.025 ↗
6. Silver impregnated bacterial cellulose-chitosan composite hydrogels for antibacterial and catalytic applications10.1016/j.jmrt.2022.03.089 ↗
7. Investigation on electrical and mechanical properties of 3D printed nylon 6 for RF/microwave electronics applications
8. Cellulose an ageless renewable green nanomaterial for medical applications: an overview of ionic liquids in extraction, separation and dissolution of cellulose10.1016/j.ijbiomac.2018.12.190 ↗
9. Processing of cellulose nanofiber-reinforced composites10.1177/0731684405049864 ↗
10. Physical aging of glass-fiber-reinforced nylon 6,6 in automobile underhood parts. J. Thermoplast
11. Signal-to- noise ratios, performance criteria, and transformations10.1080/00401706.1988.10488313 ↗
12. Defining next-generation additive manufacturing applications for the ministry of defence (MoD)10.1016/j.procir.2016.08.029 ↗
13. Additive manufacturing: applications and directions in photonics and optoelectronics10.1002/adom.201800419 ↗
14. Low-temperature selective laser sintering 3D printing of PEEK-Nylon blends: impact of thermal post-processing on mechanical properties and thermal stability10.1002/app.52290 ↗
15. Composites of waterborne polyurethane and cellulose nanofibers for 3D printing and bioapplications10.1016/j.carbpol.2019.02.025 ↗
16. Construction and mechanism of 3D printed polyamide 12/boron nitride template composites with localized and unidirectional thermally conductive property10.1016/j.compositesb.2021.109267 ↗
17. Applications of nylon membrane arrays to gene expression analysis10.1016/S0022-1759(01)00302-7 ↗
18. Bacterial cellulose as a versatile biomaterial for wound dressing application10.3390/molecules27175580 ↗
19. A review on filament materials for fused filament fabrication
20. The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing10.1002/polb.24333 ↗
21. Taguchi optimization of parameters for feedstock fabrication and FDM manufacturing of wear-resistant UHMWPE-based composites10.3390/ma13122718 ↗
22. Bacterial cellulose membranes as carriers for nisin: incorporation, antimicrobial activity, cytotoxicity and morphology10.3390/polym14173497 ↗
23. Review: current international research into cellulose nanofibres and nanocomposites10.1007/s10853-009-3874-0 ↗
24. 3D printing of a robust polyamide-12-carbon black composite via selective laser sintering: thermal and electrical conductivity10.1002/mame.201800718 ↗
25. Cellulose
26. Morphology and thermal properties of PLA–cellulose nanofibers composites10.1016/j.carbpol.2012.08.054 ↗
27. Consolidation of additive manufactured continuous carbon fiber reinforced polyamide 12 composites and the development of process-related numerical simulation methods10.3390/polym14163429 ↗
28. Additive manufacturing applications in cardiology: a review. Egypt
29. Failure analysis of 3D printed glass fiber/PA12 composite lattice structures using DIC10.1016/j.compstruct.2019.111192 ↗
30. Two-step approach based on selective laser sintering for high performance carbon black/polyamide 12 composite with 3D segregated conductive network10.1016/j.compositesb.2019.107214 ↗
31. Bacterial cellulose nanofibers promote stress and fidelity of 3D-printed silk based hydrogel scaffold with hierarchical pores10.1016/j.carbpol.2019.05.080 ↗
32. 3D printed hydrogels with oxidized cellulose nanofibers and silk fibroin for the proliferation of lung epithelial stem cells10.1007/s10570-020-03526-7 ↗
33. Using additive manufacturing applications for design and development of food and agricultural equipments10.1504/IJMPT.2019.097662 ↗
34. Additive manufacturing applications in orthopaedics: a review10.1016/j.jcot.2018.04.008 ↗
35. Preparation of cellulose nanofiber-reinforced gelatin hydrogel and optimization for 3D printing applications10.15376/biores.13.3.5909-5924 ↗
36. Pharmaceutical significance of cellulose: a review10.3144/expresspolymlett.2008.90 ↗
37. Laser cutting of 3D printed acrylonitrile butadiene styrene plates for dimensional and surface roughness optimization10.1007/s00170-021-08350-2 ↗
38. Parametric optimization of material extrusion 3D printing process: an assessment of Box-Behnken vs. full-factorial experimental approach10.1007/s00170-022-09532-2 ↗
39. Fabrication strategies and biomedical applications of three-dimensional bacterial cellulose-based scaffolds: a review10.1016/j.ijbiomac.2022.03.191 ↗
40. Dynamic mechanical behavior and thermal properties of microcrystalline cellulose (MCC)-filled nylon 6 composites10.1016/j.tca.2011.02.026 ↗
41. Polyamide 6–cellulose composites: effect of cellulose composition on melt rheology and crystallization behavior10.1002/pen.23603 ↗
42. Krishnanand · 2021 · 497
43. Developing fibrillated cellulose as a sustainable technological material10.1038/s41586-020-03167-7 ↗
44. Effects of root exudates on the sorption of polycyclic aromatic hydrocarbons onto biochar10.1080/26395940.2019.1593054 ↗
45. Cellulose-Nanofiber-enabled 3D printing of a carbon-nanotube microfiber network10.1002/smtd.201700222 ↗
46. Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling10.1016/j.matdes.2017.11.027 ↗
47. An overview regarding microbial aspects of production and applications of bacterial cellulose10.3390/ma15020676 ↗
48. Tribological behavior of 3D-printed nanometer SiC and SiO2 particle-reinforced polyamide 12 composites by selective laser sintering under seawater lubrication condition10.3390/polym14194137 ↗
49. Probing cellulose structures with vibrational spectroscopy10.1007/s10570-018-2199-z ↗
50. Critical review on agrowaste cellulose applications for biopolymers10.1007/s12588-018-9219-6 ↗
51. PA-12-Zirconia-Alumina-Cenospheres 3D printed composites: accelerated ageing and role of the sterilisation process for physicochemical properties10.3390/polym14153152 ↗
52. Electrophoretic deposition for the growth of carbon nanofibers on Ni-Cu/C-fiber textiles10.5012/bkcs.2014.35.8.2431 ↗
53. Separation of used automobile oil/water mixture by Nylon 6/ZnO nanoparticles electrospun membrane10.1016/j.seppur.2022.121578 ↗
54. 3D printed alginate-cellulose nanofibers based patches for local curcumin administration10.1016/j.carbpol.2021.118026 ↗
55. Cellulose nanocrystals vs. cellulose nanospheres: a comparative study of cytotoxicity and macrophage polarization potential10.1016/j.carbpol.2022.120464 ↗
56. Characterization of mechanical and morphological properties of cellulose reinforced polyamide 6 composites10.1007/s10570-015-0723-y ↗
57. Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing : the impact of seven critical control parameters10.1007/s00170-023-11202-w ↗
58. Multifunctional material extrusion 3D-printed antibacterial polylactic acid (PLA) with binary inclusions: the effect of cuprous oxide and cellulose nanofibers10.3390/fib10060052 ↗
59. Three-dimensional printed polyamide 12 (PA12) and polylactic acid (PLA) alumina (Al 2 O 3) nanocomposites with significantly enhanced tensile , flexural , and impact properties 1210.3390/nano12234292 ↗
60. Phadke · 1995
61. 3D printing biocompatible materials with Multi Jet Fusion for bioreactor applications
62. Preparation and characterisation of cellulose nanofibres10.1007/s10853-011-5565-x ↗
63. Transparent and cell-guiding cellulose nanofiber 3D printing bioinks10.1021/acsami.2c16126 ↗
64. The improvement of mechanical and thermal properties of polyamide 12 3D printed parts by fused deposition modelling10.3144/expresspolymlett.2017.92 ↗
65. Additive manufacturing – state of art10.1016/j.matpr.2019.06.728 ↗
66. Mechanical investigation and optimization of parameter selection for Nylon material processed by FDM. Mater
67. Fused filament fabrication of nylon 6/66 copolymer: parametric study comparing full factorial and Taguchi design of experiments10.1108/RPJ-06-2021-0139 ↗
68. Dual-layered approach of ovine collagen-gelatin/cellulose hybrid biomatrix containing graphene oxide-silver nanoparticles for cutaneous wound healing: fabrication, physicochemical, cytotoxicity and antibacterial characterisation10.3390/biomedicines10040816 ↗
69. Experimental determination and numerical simulation of material and damage behaviour of 3D printed polyamide 12 under cyclic loading10.1016/j.engfracmech.2019.106841 ↗
70. Cellulose and its derivatives: towards biomedical applications10.1007/s10570-020-03674-w ↗
71. Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives10.1039/C7RA11157F ↗
72. Nylon—a material introduction and overview for biomedical applications10.1002/pat.5372 ↗
73. Essential work of fracture studies of 3D Printed PEEK (Poly-ether-ether-ketone) polymer10.1016/j.engfracmech.2022.108656 ↗
74. Dynamic of the structural alteration of biochar in ancient Anthrosol over a long timescale by Raman spectroscopy10.1371/journal.pone.0229447 ↗
75. Temperature studies of polycarbonate using Fourier transform Raman spectroscopy10.1007/BF00319235 ↗
76. Swamidass · 2000 · vol. 462
77. Effect of cellulose fiber reinforcement on the temperature dependent mechanical performance of nylon 610.1177/0731684408093875 ↗
78. Development of bioinspired functional chitosan/cellulose nanofiber 3D hydrogel constructs by 3D printing for application in the engineering of mechanically demanding tissues10.3390/polym13101663 ↗
79. Design and development of nylon 66 plastic helical gears in automobile application
80. The effect of six key process control parameters on the surface roughness , dimensional accuracy , and porosity in material extrusion 3D printing of polylactic acid : prediction models and optimization supported by robust design analysis
81. Parameter effects and process modelling of Polyamide 12 3D-printed parts strength and toughness10.1080/10426914.2022.2030871 ↗
82. High-performance medical-grade resin radically reinforced with cellulose nanofibers for 3D printing10.1016/j.jmbbm.2022.105408 ↗
83. Multi-Functional 3D-printed vat photopolymerization biomedical-grade resin reinforced with binary nano inclusions: the effect of cellulose nanofibers and antimicrobial nanoparticle agents10.3390/polym14091903 ↗
84. Optimization of friction stir welding for various tool pin geometries : the weldability of Polyamide 6 plates made of material extrusion additive manufacturing
85. Mechanical response assessment of antibacterial PA12/TiO2 3D printed parts: parameters optimization through artificial neural networks modeling10.1007/s00170-022-09376-w ↗
86. Sustainable additive manufacturing: mechanical response of polyamide 12 over multiple recycling processes
87. Multi-functional medical grade Polyamide12/Carbon Black nanocomposites in material extrusion 3D printing10.1016/j.compstruct.2023.116788 ↗
88. Mechanical performance of fused filament fabricated and 3d-printed polycarbonate polymer and polycarbonate/cellulose nanofiber nanocomposites10.3390/fib9110074 ↗
89. Multi-functional polyamide 12 (PA12)/multiwall carbon nanotube 3D printed nanocomposites with enhanced mechanical and electrical properties10.1080/09243046.2022.2076019 ↗
90. Multivariate optimization for maximum capacity of lead acid battery through Taguchi method
91. Microstructure and properties of glass fiber-reinforced polyamide/nylon microcellular foamed composites10.3390/polym12102368 ↗
92. Optimisation of tensile and compressive behaviour of PLA 3D printed parts using categorical response surface methodology
93. The durbin-watson test for autocorrelation in nonlinear models10.2307/2109675 ↗
94. The process and performance comparison of polyamide 12 manufactured by multi jet fusion and selective laser sintering10.1016/j.jmapro.2019.07.014 ↗
95. Fracture behavior of 3D printed carbon fiber-reinforced polymer composites10.1016/j.compscitech.2021.108741 ↗
96. Effect of additives and print orientation on the properties of laser sintering-printed polyamide 12 components10.3390/polym14061172 ↗
97. Successful application of the Taguchi method to simulated soil erosion experiments at the slope scale under various conditions10.1016/j.catena.2020.104835 ↗
98. Coal polymer composites prepared by fused deposition modeling (FDM) 3D printing10.1007/s10853-022-07276-8 ↗
99. Fused deposition modeling 3D printing of polyamide-based composites and its applications10.1016/j.coco.2020.100413 ↗
100. Bacteriostatic activity and cytotoxicity of bacterial cellulose-chitosan film loaded with in-situ synthesized silver nanoparticles10.1016/j.carbpol.2021.119017 ↗