journal article·2024-04

Gaussian random field-based characterization and reconstruction of cancellous bone microstructure considering the constraint of correlation structure

Lei He, Moxin Zhao, Jason Pui Yin Cheung, Teng Zhang, Xiaodan Ren

Publisher page

Abstract

The macro scale physical properties of cancellous bone materials are governed by the microstructural features, which is of great significance for the multi-scale research of cancellous bone and the inverse design of bone-mimicking materials. Therefore, it is essential to characterize the natural cancellous bone samples, and reconstruct the microstructures with the biomimetic osteointegration and mechanical properties. In this research, a novel approach for the characterization and reconstruction of cancellous bone was proposed, based on the medical image analysis and anisotropic three-dimensional Gaussian random field (GRF). The geometric similarity, i.e. the interface curvature distribution (ISD), was meticulously studied, which is important to the osteointegration ability. And the mechanical properties were validated by the stress-strain curves under the large compressive strain simulated by the smoothed particle hydrodynamic (SPH) method. In addition, the effects of the generation parameters of GRF-based biomimetic microstructures on the apparent properties were analyzed. The ISD results demonstrated that both GRF and micro-CT groups had the similar columnar morphological properties, while the latter had more hyperbolic features. And it was found that the GRF-based biomimetic microstructures and the natural bone samples based on micro-CT (MCT) had the similar failure mode. The concordance correlation coefficient between MCT and GRF pairs was 0.8685, with a Pearson ρ value of 0.8804, and significance level p<0.0001. The Bland-Altman LoA was 0.1647 MPa with 95 % (1.96SD) lower and upper bound value between -0.2892 and 0.6185 MPa. The two groups had almost the same elastic modulus with the mean absolute percentage error (MAPE) of 7.84 %. While the yield stress and total conversion energy of the GRF-based samples were lower than those of the natural bone samples, and the MAPE were 16.99 % and 16.27 %, respectively. Although it meant the lower structural efficiency, the huge design space of this approach and advanced 3D printing technology can provide great potential for the design of orthopedic implants.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced X-ray Imaging Techniques · Nuclear Physics and Applications · Advanced X-ray and CT Imaging

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Perspective: materials informatics and big data: realization of the “fourth paradigm” of science in materials science10.1063/1.4946894 ↗
2. Additively manufactured lattice structures with controlled transverse isotropy for orthopedic porous implants10.1016/j.compbiomed.2022.105761 ↗
3. High-strength porous biomaterials for bone replacement: a strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints10.1016/j.actbio.2015.10.048 ↗
4. Synthetic bone: design by additive manufacturing10.1016/j.actbio.2019.07.049 ↗
5. Computational microstructure characterization and reconstruction: review of the state-of-the-art techniques10.1016/j.pmatsci.2018.01.005 ↗
6. On spinodal decomposition10.1016/0001-6160(61)90182-1 ↗
7. Substrate curvature as a cue to guide spatiotemporal cell and tissue organization10.1016/j.biomaterials.2019.119739 ↗
8. The local and global geometry of trabecular bone10.1016/j.actbio.2021.06.013 ↗
9. The role of fabric in the large strain compressive behavior of human trabecular bone10.1115/1.4001361 ↗
10. Metallic implant biomaterials10.1016/j.mser.2014.10.001 ↗
11. Stochastic harmonic function representation of random fields for material properties of structures
12. Power law models for the mechanical properties of cancellous bone10.1243/EMED_JOUR_1986_015_039_02 ↗
13. Multi-objective shape optimization of bone scaffolds: enhancement of mechanical properties and permeability10.1016/j.actbio.2022.04.051 ↗
14. Biomechanics of cellular solids10.1016/j.jbiomech.2004.09.027 ↗
15. Design and properties of 3D scaffolds for bone tissue engineering10.1016/j.actbio.2016.06.032 ↗
16. Multiscale modeling of bone tissue with surface and permeability control10.1016/j.jbiomech.2010.10.007 ↗
17. Engineering anatomically shaped human bone grafts10.1073/pnas.0905439106 ↗
18. Application of neural network and finite element method for multiscale prediction of bone fatigue crack growth in cancellous bone
19. Design of 3D printed scaffolds for bone tissue engineering: a review10.1016/j.bprint.2021.e00167 ↗
20. Experimental study of cancellous bone under large strains and a constitutive probabilistic model10.1016/j.jmbbm.2011.10.006 ↗
21. Materials design for bone-tissue engineering10.1038/s41578-020-0204-2 ↗
22. Elastic properties of cancellous bone derived from finite element models of parameterized microstructure cells10.1016/S0021-9290(03)00065-4 ↗
23. Development and initial validation of a novel smoothed-particle hydrodynamics-based simulation model of trabecular bone penetration by metallic implants10.1002/jor.23734 ↗
24. Inverse-designed spinodoid metamaterials10.1038/s41524-020-0341-6 ↗
25. A new constitutive model for simulation of softening, plateau, and densification phenomena for trabecular bone under compression10.1016/j.jmbbm.2016.08.028 ↗
26. Loss of longitudinal superiority marks the microarchitecture deterioration of osteoporotic cancellous bones10.1007/s10237-021-01491-z ↗
27. The design and evaluation of bionic porous bone scaffolds in fluid flow characteristics and mechanical properties10.1016/j.cmpb.2022.107059 ↗
28. Trabecular-like Ti–6Al–4V scaffold for bone repair: a diversified mechanical stimulation environment for bone regeneration10.1016/j.compositesb.2022.110057 ↗
29. Probabilistic model of bone structure based on CT scan data and validation of simulation results using the Finite Cell Method
30. The role of feature curvature in contact guidance10.1016/j.actbio.2012.03.025 ↗
31. The role of fabric in the quasi-static compressive mechanical properties of human trabecular bone from various anatomical locations10.1007/s10237-006-0073-7 ↗
32. Mechanical characterization of structurally porous biomaterials built via additive manufacturing: experiments, predictive models, and design maps for load-bearing bone replacement implants10.1016/j.actbio.2017.09.013 ↗
33. Towards multi-dynamic mechano-biological optimization of 3D-printed scaffolds to foster bone regeneration10.1016/j.actbio.2019.10.029 ↗
34. Trabecular bone modulus–density relationships depend on anatomic site10.1016/S0021-9290(03)00071-X ↗
35. Scaffold curvature-mediated novel biomineralization process originates a continuous soft tissue-to-bone interface10.1016/j.actbio.2017.07.029 ↗
36. Mechanisms of reduced implant stability in osteoporotic bone10.1007/s10237-011-0312-4 ↗
37. Material heterogeneity in cancellous bone promotes deformation recovery after mechanical failure10.1073/pnas.1520539113 ↗
38. A morphological, topological and mechanical investigation of gyroid, spinodoid and dual-lattice algorithms as structural models of trabecular bone10.1016/j.jmbbm.2022.105584 ↗
39. Additive manufacturing of trabecular tantalum scaffolds by laser powder bed fusion: mechanical property evaluation and porous structure characterization10.1016/j.matchar.2020.110694 ↗
40. Tuning surface curvatures and young's moduli of TPMS-based lattices independent of volume fraction10.1016/j.matdes.2022.110542 ↗
41. Gaussian curvature–driven direction of cell fate toward osteogenesis with triply periodic minimal surface scaffolds10.1073/pnas.2206684119 ↗
42. Architecture and migration of an epithelium on a cylindrical wire10.1073/pnas.1418857112 ↗
43. B. Yuan, L. Wang, R. Zhao, X. Yang, X. Yang, X. Zhu, L. Liu, K. Zhang, Y. Song, X. Zhang, A biomimetically hierarchical polyetherketoneketone scaffold for osteoporotic bone repair, Sci. Adv. 6(50) eabc4704.10.1126/sciadv.abc4704 ↗
44. Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials10.1016/j.actbio.2018.12.013 ↗
45. Failure mechanisms of pedicle screws and cortical screws fixation under large displacement: a biomechanical and microstructural study based on a clinical case scenario10.1016/j.jmbbm.2020.103646 ↗