Role of damage mechanics in nanoindentation of lamellar bone at multiple sizes: Experiments and numerical modeling
Source abstract
Abstract
The aim of this paper is to show that damage mechanisms can account for the response of lamellar bone to nanoindentation tests, with particular regards to the decrease of indentation stiffness with increasing penetration depth and to the loss of contact stiffness during the unloading phase of the test. For this purpose, indentation experiments on bovine cortical bone samples along axial and transverse directions have been carried out at five penetration depths from 50 to 450 nm; furthermore, a continuum damage model has been implemented into finite element analyses, which are able to simulate indentation experiments. Experiments along the axial direction have shown a decrease of about 20% of the indentation modulus with indentation depth; a similar trend was found along the transverse direction. All unloading branches of the force-displacement indentation curves exhibited relevant stiffness loss (curve concavity). The numerical model with damage was able to correctly predict the indentation stiffness and hardness at 300 nm penetration depth along both axial and transverse directions. Furthermore, stiffness loss during unloading was simulated with both qualitative and quantitative agreement with experiments. A final validation has been provided by simulating axial indentation experiments at the remaining penetration depths using the same set of constitutive parameters as those used to simulate the experiments at 300 nm depth. These results support the hypothesis that damage plays a relevant role in the mechanics of lamellar bone and should be taken into account when studying bone mechanical properties at multiple scales.
Source: europepmc · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Orthopaedic implants and arthroplasty · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Assessment of mechanical properties of human osteon lamellae exhibiting various degrees of mineralization by nanoindentation10.1142/S0218957708002024 ↗
2. Ultrastructural changes accompanying the mechanical deformation of bone tissue: a raman imaging study10.1007/s00223-002-1039-0 ↗
3. A finite element model for direction-dependent mechanical response to nanoindentation of cortical bone allowing for anisotropic post-yield behaviour of the tissue10.1115/1.4001358 ↗
4. Nanoindentation testing and finite element simulations of cortical bone allowing for anisotropic elastic and inelastic mechanical response10.1016/j.jbiomech.2011.04.020 ↗
5. Carnelli, D., Vena, P., Dao, M., Yao, H., Ortiz, C., Contro, R., 2011b. Orientation and size dependent mechanical modulation within individual osteons in cortical bone tissue. Acta Biomater. (submitted for publication).
6. Cowin · 1989
7. Cowin · 2001
8. Currey · 1984
9. Currey · 2002
10. Fundamental issues in finite element analysis of localization of deformation10.1108/eb023897 ↗
11. Explicit approximations of the indentation modulus of elastically orthotropic solids for conical indenters10.1016/j.ijsolstr.2004.06.019 ↗
12. Nanoindentation of biological materials10.1016/S1748-0132(06)70077-9 ↗
13. Three-dimensional finite element analysis of the effects of anisotropy on bone mechanical properties measured by nanoindentation10.1557/jmr.2004.19.1.114 ↗
14. Sacrificial bonds and hidden length dissipate energy as mineralized fibrils separate during bone fracture10.1038/nmat1428 ↗
15. Structure and mechanical quality of the collagen-mineral nano-composite in bone10.1039/B402005G ↗
16. Nature’s hierarchical materials10.1016/j.pmatsci.2007.06.001 ↗
17. Universal microstructural patterns in cortical and trabecular, extracellular and extravascular bone materials: micromechanics-based prediction of anisotropic elasticity10.1016/j.jtbi.2006.09.013 ↗
18. Mechanism-based strain gradient plasticity—I. Theory10.1016/S0022-5096(98)00103-3 ↗
19. A three-dimensional elastic–plastic damage constitutive law for bone tissue10.1007/s10237-008-0125-2 ↗
20. Mechanical modulation at the lamellar level in osteonal bone10.1557/jmr.2006.0234 ↗
21. Nanoscale deformation mechanisms in bone10.1021/nl051584b ↗
22. Fibrillar level fracture in bone beyond the yield point10.1007/s10704-006-6635-y ↗
23. Nanoindentation discriminates the elastic properties of individual human bone lamellae under dry and physiological conditions10.1016/S8756-3282(01)00624-X ↗
24. Mineralized collagen fibrils: a mechanical model with a staggered arrangement of mineral particles10.1016/S0006-3495(00)76426-5 ↗
25. Comparison of damage accumulation measures in human cortical bone10.1016/S0021-9290(97)00036-5 ↗
26. Mechanical behavior of damaged trabecular bone10.1016/0021-9290(94)90040-X ↗
27. Tensile damage and its effects on cortical bone10.1016/S0021-9290(03)00169-6 ↗
28. Damage Mechanics
29. The use of nanoindentation technique for characterizing the properties of mineralized hard tissues: state-of-the art review10.1002/jbm.b.31092 ↗
30. Mechanisms governing the inelastic deformation of cortical bone and application to trabecular bone10.1016/j.actbio.2005.08.004 ↗
31. Calibration of a constitutive model for the post-yield behaviour of cortical bone10.1016/j.jmbbm.2008.11.003 ↗
32. High-resolution finite element models with tissue strength asymmetry accurately predict failure of trabecular bone10.1016/S0021-9290(00)00149-4 ↗
33. Indentation size effects in crystalline materials: a law for strain gradient plasticity10.1016/S0022-5096(97)00086-0 ↗
34. Viscous-elastic–plastic behavior of bone using Berkovich nanoindentation10.1007/s11043-009-9098-5 ↗
35. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments10.1557/JMR.1992.1564 ↗
36. Influences of spherical tip radius, contact depth, and contact area on nanoindentation properties of bone10.1016/j.jbiomech.2010.10.008 ↗
37. A theoretical model of the effect of continuum damage on a bone adaptation model10.1016/S0021-9290(00)00215-3 ↗
38. Mechanical properties and the hierarchical structure of bone10.1016/S1350-4533(98)00007-1 ↗
39. Elastic properties of human cortical and trabecular lamellar bone measured by nanoindentation10.1016/S0142-9612(97)00073-2 ↗
40. Microstructural elasticity and regional heterogeneity in human femoral bone of various ages examined by nano-indentation10.1016/S0021-9290(01)00199-3 ↗
41. Effect of mineral content on the nanoindentation properties and nanoscale deformation mechanisms of bovine tibial cortical bone10.1007/s10856-005-4429-9 ↗
42. Nanogranular origins of the strength of bone10.1021/nl061877k ↗
43. Scanning texture analysis of lamellar bone using microbeam synchrotron x-ray radiation10.1107/S0021889806044888 ↗
44. Materials design in biology10.1016/S0928-4931(00)00141-7 ↗
45. The material bone: structure mechanical function relations10.1146/annurev.matsci.28.1.271 ↗
46. Size-dependent heterogeneity benefits the mechanical performance of bone10.1016/j.jmps.2010.09.012 ↗
47. Characterization of indentation response and stiffness reduction of bone using a continuum damage model10.1016/j.jmbbm.2009.08.001 ↗
48. Mechanical property determination of bone through nano- and micro-indentation testing and finite element simulation10.1016/j.jbiomech.2007.09.019 ↗
49. Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur10.1016/S0021-9290(99)00111-6 ↗