Biodegradable implant application: Electrodeposition of HA/TiO2/ZrO2 coating onto Zn-composite substrates

Zinc has currently emerged as a promising biodegradable metal due to its good biocompatible property and promising degradation behaviour. Additionally, inadequate mechanical strength and a lower cell viability value fall short of what is needed for biodegradable implants. In this work, we used the stir-casting process to create a biodegradable Zn-1Mg-1Cu-1HA (ZHA) and Zn-1Mg-1Cu-1ZrO₂ (ZZR) composite onto which ceramics composite coating is done by electrodeposition technique to enhance the biocompatibility. The as-cast sample has uniformly distributed fine MgZn₂ and CuZn₂ phases in a α-Zn matrix, according to microstructural analysis. The mechanical test confirms that ZZR composite exhibited high tensile and compressive properties, including compressive yield strength of 369.562 MPa, a yield tensile strength of 88.725 MPa and ultimate tensile strength of 116.21 MPa. The result of potentiodynamic polarization test shows that the coated ZZR composite sample gives a corrosion rate value of 0.112 mm/year. From immersion tests, the degradation rate obtained a much lower value after immersing the sample in PBS solution for 55 days (0.067 mm/year). Moreover, an extract of coated ZZR composite shows good cell viability in comparison to the uncoated sample at a concentration of 25%, 50% and 75%. Also, the hemolysis percentage for coated ZZR sample is lower than the other prepared uncoated sample (3.072%) Overall, the result obtained proves that the coated ZZR composite sample can be expected as a capable material for implant application.