journal article·2018-02

The use of hardened bone cement as an impaction grafting extender for revision hip arthroplasty

Mark Ruddy, David P. FitzPatrick, Kenneth T. Stanton

Publisher page

Abstract

Impaction bone grafting is a method of restoring bone stock to patients who have suffered significant bone loss due to revision total hip surgery. The procedure requires morsellised cancellous bone (MCB) to be impacted into the site of bone loss in order to stabilise the prosthesis with the aim of long term resorption and reintegration of the impacted bone graft. Due to financial cost and the potential to transmit disease, the use of supplementary material, known as an extender, is frequently used to increase the graft material volume. This study investigates the use of hardened Hydroset (Stryker Corp, MA, USA), an injectable bone cement (IBC), as an extender material and compares the performance of the IBC in different weight percent inclusions to a commercially available bone graft extender (GCP, BoneSave, Stryker Corp, MA, USA). The surgical impaction procedure was standardised and samples were evaluated in terms of graft stiffness and height. It was observed that 30wt% IBC extended samples had significantly improved graft stiffness (p = 0.02) and no significant different in height (p = 0.067) over a 100% MCB control sample. Cyclic loading, representative of gait, found that the IBC subsided similarly to the commercial bone substitute in wt% above 10%. Shear testing of the impacted grafts showed no significant differences between GCP and IBC with impaction forces determining the shear parameters of impacted grafts. The effects of the impaction and cyclical loading procedures on extender particle sizes was assessed via particle size analysis. It was found that the IBC extended samples demonstrated reduced friability, evident in the better retention of particle size as a result of both impaction and gait representative loading compared to that of the GCP samples. This indicates a potential reduction in issues arising from small particle migration to joint surfaces. Scanning electron microscopy of the MCB particles with both GCP and IBC as extenders showed retention of the porous trabecular structure post-testing which is essential for revascularisation and bone growth into the graft.
Source: europepmc · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Orthopaedic implants and arthroplasty · Orthopedic Infections and Treatments · Total Knee Arthroplasty Outcomes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. Image processing with ImageJ
2. Impaction allografting—the effect of impaction force and alternative compaction methods on the mechanical characteristics of the graft10.1002/jbm.b.31117 ↗
3. Biological activity of tri-calciumphosphate/hydroxyl-apatite granules mixed with impacted morsellized bone graft. A study in rabbits10.1002/jbm.b.30687 ↗
4. ASTM-International · 2003
5. ASTM-International · 2017
6. Stiffness and compactness of morselized grafts during impaction: an in vitro study with human femoral heads10.1080/000164701753532790 ↗
7. Subsidence in impaction grafting: the effect of adding a ceramic bone graft extender to bone10.1243/09544110260138754 ↗
8. The compatibility of ceramic bone graft substitutes as allograft extenders for use in impaction grafting of the femur10.1302/0301-620X.87B3.14337 ↗
9. Acetabular defect reconstruction with impacted morsellized bone grafts or TCP/HA particles. A study on the mechanical stability of cemented cups in an artificial acetabulum model10.1016/S0142-9612(01)00153-3 ↗
10. Acetabular defect reconstruction with impacted morsellized bone grafts or TCP/HA particles. A study on the mechanical stability of cemented cups in an artificial acetabulum model10.1016/S0142-9612(01)00153-3 ↗
11. Effect of vibration on the shear strength of impacted bone graft in revision hip surgery10.1302/0301-620X.93B6.24544 ↗
12. Mechanical considerations in impaction bone grafting10.1302/0301-620X.81B1.0810118 ↗
13. Bone transplantation and human immunodeficiency virus: an estimate of risk of acquired immunodeficiency syndrome (AIDS)10.1097/00003086-198903000-00015 ↗
14. Comparison of an experimental bone cement with a commercial control, Hydroset™
15. Transmission of the hepatitis-C virus by tissue transplantation10.2106/00004623-199502000-00007 ↗
16. Simian immunodeficiency virus (human HIV-II) transmission in allograft bone procedures10.1097/00007632-199520120-00003 ↗
17. Particle size influence in an impaction bone grafting model. Comparison of fresh-frozen and freeze-dried allografts10.1016/j.jbiomech.2009.06.045 ↗
18. Craig · 2004
19. Techniques to improve the shear strength of impacted bone graft the effect of particle size and washing of the graft10.2106/00004623-200304000-00009 ↗
20. On the fate of particles liberated from hydroxyapatite coatings in vivo10.1007/s11845-014-1243-8 ↗
21. Threshold force required for femoral impaction grafting in revision hip surgery: a preliminary study in sow femurs10.3109/17453674.2010.480936 ↗
22. Fryar · 20072010
23. Supply and demand of bone allograft for revision hip surgery in Scotland10.1302/0301-620X.80B4.0800595 ↗
24. Impacted cancellous allografts and cement for revision total hip arthroplasty
25. Mechanical characteristics of impacted morsellised bone grafts used in revision of total hip arthroplasty10.1302/0301-620X.81B6.0811052 ↗
26. Optimizing a hydroxyapatite/tricalcium-phosphate ceramic as a bone graft extender for impaction grafting
27. Allografting in total hip arthroplasty: In adults with severe acetabular deficiency including a surgical technique for bolting the graft to the ilium10.1097/00003086-198201000-00025 ↗
28. IChemE · 1989
29. In vitro and in vivo validation of a new bonesubstitute for loaded orthopaedic applications
30. Micromotion of femoral stems in total hip arthroplasty. A randomized study of cemented, hydroxyapatite-coated, and porous-coated stems with roentgen stereophotogrammetric analysis10.2106/00004623-199411000-00013 ↗
31. Subsidence of a non-polished stem in revisions of the hip using impaction allograft evaluation with radiostereometry and dual energy x-ray absorptiometry10.1302/0301-620X.81B1.0810135 ↗
32. Revision total hip arthroplasty10.2106/00004623-198567040-00003 ↗
33. Cancellous and cortical morselized allograft in revision total hip replacement: a biomechanical study of implant stability10.1016/S0021-9290(03)00013-7 ↗
34. Injectable bone cements for use in vertebroplasty and kyphoplasty: state-of-the-art review10.1002/jbm.b.30398 ↗
35. Infection in bone allografts. incidence, nature, and treatment10.2106/00004623-198870030-00008 ↗
36. Subsidence of the femoral component related to long-term outcome of hip replacement10.1302/0301-620X.71B4.2768310 ↗
37. Madhok, R., Lewallen, D.G., Wallrichs, S.L., Ilstrup, D.M., Kurland, R.L., Melton, L.J., 1993. Trends in the utilization of primary total hip arthroplasty, 1969 through 1990: a population-based study in Olmsted County, Minnesota, Mayo Clin. Proc., 1 ed., pp. 11–18.10.1016/S0025-6196(12)60013-5 ↗
38. Femoral component revision using impacted morsellised cancellous graft a biomechanical study of implant stability10.1302/0301-620X.78B6.0780973 ↗
39. The effect of the addition of hydroxyapatite graft substitutes upon the hoop strain and subsequent subsidence of a femoral model during impaction bone grafting10.1016/j.jmbbm.2011.08.027 ↗
40. Impaction bone-grafting before insertion of a femoral stem with cement in revision total hip arthroplasty. A minimum two-year follow-up study10.2106/00004623-199712000-00009 ↗
41. Factors affecting the cohesion of impaction bone graft10.1302/0301-620X.88B6.17278 ↗
42. Migration of the Charnley stem in rheumatoid arthritis and osteoarthritis. A roentgen stereophotogrammetric study10.1302/0301-620X.77B1.7822389 ↗
43. Imaging of prosthetic joints10.1259/img.15.4.150270 ↗
44. Ruddy · 2016 · 86
45. Acetabular revision with impacted morsellised cancellous bone grafting and a cemented cup a 15–20 year follow-up10.1302/0301-620X.86B4.14769 ↗
46. Bone grafting in total hip replacement for acetabular protrusion10.3109/17453678408992402 ↗
47. Determination of mechanical properties of impacted human morsellized cancellous allografts for revision joint arthroplasty
48. Impacted corticocancellous allografts: recoil and strength10.1016/S0883-5403(99)90019-0 ↗
49. Tricalcium-phosphate and hydroxyapatite bone-graft extender for use in impaction grafting revision surgery an in vivo study on human femora10.1302/0301-620X.87B2.14749 ↗
50. Time-dependent mechanical properties of HA/TCP particles in relation to morsellized bone grafts for use in impaction grafting10.1002/jbm.1058 ↗
51. Mechanical properties of compacted morselized cancellous bone graft using one-dimensional consolidation testing10.1016/S0021-9290(00)00156-1 ↗
52. Impacted morselized cancellous bone: mechanical effects of defatting and augmentation with fine hydroxyapatite particles10.1016/j.jbiomech.2003.12.002 ↗
53. Impactability and time-dependent mechanical properties of porous titanium particles for application in impaction grafting10.1002/jbm.b.31692 ↗
54. Wise · 2000
55. Mechanical properties of 7–10mm bone grafts and small slurry grafts in impaction bone grafting10.1002/jor.21357 ↗