journal article·2025-08-01Open access

Influence of Substrate Material and Sensor Geometry Variations on the Performance of Fused Deposition Modeling-Printed Strain Sensors

Sevittrangampatty Kandasamy Dhinesh, Senthil Kumar Kallippatti Lakshmanan, Nagarajan Pitchandi

Abstract

3D printing technology has made fabrication of electronics and sensors a cost-effective and customisable approach. Fabrication of 3D-printed strain gauges through fused deposition modeling technology offers compatibility and flexibility in adopting different substrate and conductive materials. The performance of a 3D-printed strain sensor depends on the selection of the conductive and substrate materials. This work focuses on the effects of substrate material variations and sensor geometrical variations on sensitivity, accuracy, stability, and working range of conductive polylactic acid (CPLA)-based 3D-printed strain sensor. Four variants of thermoplastic polyurethane (TPU) materials with different shore hardness values such as thermoplastic elastomer (TPE) 70A, eLastic TPE 83A, eFlex TPU 87A, and eTPU 95A have been chosen as the substrate materials. Strain sensors are 3D printed with all TPU substrate variants with CPLA in five different configurations, namely linear, serpentine, square, triangular, and trapezoidal. The resistance change ratios of the printed sensors, gauge factor, strain limits, and hysteresis error are computed by loading the sensor over various strain values under multiple cycles. Results revealed that the CPLA-eTPU 95A in triangular configuration outperforms other TPU variants in terms of gauge factor and hysteresis error. The gauge factor and hysteresis error exhibited by the CPLA-eTPU 95A in triangular configuration are 18.63% higher and 18.37% lower than that of CPLA-eFlex TPU 87A sensor, respectively. This happens due to high elastic modulus and shape recovery characteristics of eTPU 95A substrate; whereas the stretching limit of eTPU 95A is 25% lower than the eFlex TPU 87A substrate. Finally, by changing the vertical distance between the surface layers of the sensing element and the substrate material as 0.1 mm, a significant increase of 54% in the working range of CPLA-eTPU 95A strain sensor was observed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Additive Manufacturing and 3D Printing Technologies · Muscle activation and electromyography studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechatronics, Bannari Amman Institute of Technology, Sathyamangalam, Tamil Nadu, India.

References (55)

Show source-provided references
1. 10.3389/fmats.2021.72542010.3389/fmats.2021.725420 ↗
2. 10.3390/s1907170610.3390/s19071706 ↗
3. 10.1108/RPJ-11-2019-030210.1108/RPJ-11-2019-0302 ↗
4. Stopforth R. Conductive polylactic acid filaments for 3D printed sensors: Experimental electrical and thermal characterization. Sci Afr, 2021; 14; doi: 10.1016/j.sciaf.2021.e01040
5. 10.1016/j.sna.2020.11191610.1016/j.sna.2020.111916 ↗
6. 10.1002/adma.20200478210.1002/adma.202004782 ↗
7. 10.1016/j.coche.2020.03.00410.1016/j.coche.2020.03.004 ↗
8. 10.1080/15583724.2019.159788310.1080/15583724.2019.1597883 ↗
9. Liu M, , Zhang Q, , Shao Y, et al. Research of a novel 3D printed strain gauge type force sensor. Micromachines (Basel), 2019; 10(1); doi: 10.3390/mi10010020
10. 10.1038/s41378-023-00509-z10.1038/s41378-023-00509-z ↗
11. 10.1021/acsami.3c0755410.1021/acsami.3c07554 ↗
12. Choi HY, , Shin EJ, , Lee SH. Design and evaluation of 3D-printed auxetic structures coated by CWPU/graphene as strain sensor. Sci Rep, 2022; 12(1); doi: 10.1038/s41598-022-11540-x
13. 10.3144/expresspolymlett.2022.5110.3144/expresspolymlett.2022.51 ↗
14. 10.1002/adem.20180042510.1002/adem.201800425 ↗
15. 10.1016/j.sna.2022.11352610.1016/j.sna.2022.113526 ↗
16. 10.1109/JSEN.2020.304243610.1109/JSEN.2020.3042436 ↗
17. 10.1007/s10853-020-05137-w10.1007/s10853-020-05137-w ↗
18. 10.1016/j.compositesb.2019.10725010.1016/j.compositesb.2019.107250 ↗
19. Xiang D, , Zhang Z, , Han Z, et al. Effects of non-covalent interactions on the properties of 3D printed flexible piezoresistive strain sensors of conductive polymer composites. Compos Interfaces, 2020; 1–15; doi: 10.1080/09276440.2020.1794479
20. 10.1016/j.compositesa.2019.10573010.1016/j.compositesa.2019.105730 ↗
21. 10.1002/admt.20210132110.1002/admt.202101321 ↗
22. 10.1007/s00170-022-10556-x10.1007/s00170-022-10556-x ↗
23. 10.1002/sus2.1110.1002/sus2.11 ↗
24. 10.1007/s00170-018-2490-z10.1007/s00170-018-2490-z ↗
25. Banks JD, , Emami A. Carbon-based piezoresistive polymer nanocomposites by extrusion additive manufacturing: Process, material design, and current progress. 3D Print Addit Manuf, 2022; doi: 10.1089/3dp.2022.0153
26. 10.1049/el.2018.036310.1049/el.2018.0363 ↗
27. 10.1007/s00170-020-06318-210.1007/s00170-020-06318-2 ↗
28. 10.2514/6.2017-035010.2514/6.2017-0350 ↗
29. 10.3389/frobt.2021.61599110.3389/frobt.2021.615991 ↗
30. 10.1007/978-3-030-54334-1_610.1007/978-3-030-54334-1_6 ↗
31. 10.3390/s2113427110.3390/s21134271 ↗
32. 10.3390/s2106215710.3390/s21062157 ↗
33. 10.1016/j.compstruct.2021.11374410.1016/j.compstruct.2021.113744 ↗
34. Rumley-Ouellette BJ Wahry JH Baker AM et al. In Situ Printing of Conductive Poly Lactic Acid Strain Sensors Embedded into Additively Manufactured Parts. In: Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance—Proceedings of the 11th International Workshop on Structural Health Monitoring. DEStech Publications: Stanford California; 2017; pp. 1881–1888; doi: 10.12783/shm2017/1407110.12783/shm2017/14071 ↗
35. IEEE Robotics and Automation Society Institute of Electrical and Electronics Engineers. 2018. International Conference on Control and Robots (ICCR 2018) September 15–17 2018 Hong Kong. n.d.
36. Dijkshoorn A, , Ravi V, , Neuvel P, et al. Mechanical Interlocking for Connecting Electrical Wires to Flexible, FDM, 3D-Printed Conductors. In: IEEE International Conference on Flexible and Printable Sensors and Systems: Vienna, Austria;, 2022; pp. 1–4; doi: 10.1109/FLEPS53764.2022.9781552
37. 10.3390/s1912266110.3390/s19122661 ↗
38. Maurizi M, , Cianetti F, , Slavic J, et al. Piezoresistive dynamic simulations of FDM 3D-printed embedded strain sensors: A new modal approach. In: Procedia Structural Integrity. Elsevier B.V.: Assisi, Italy; 2019; pp. 390–397; doi: 10.1016/j.prostr.2020.02.036
39. Lanzolla AML, , Attivissimo F, , Percoco G, et al. Additive manufacturing for sensors: Piezoresistive strain gauge with temperature compensation. Appl Sci (Switzerland), 2022; 12(17); doi: 10.3390/app12178607
40. 10.1016/j.coco.2022.10145410.1016/j.coco.2022.101454 ↗
41. 10.1002/adma.20150511810.1002/adma.201505118 ↗
42. 10.1109/ACCESS.2018.287664710.1109/ACCESS.2018.2876647 ↗
43. 10.1002/adma.20170381710.1002/adma.201703817 ↗
44. 10.1016/j.sna.2017.07.02010.1016/j.sna.2017.07.020 ↗
45. Institute of Electrical and Electronics Engineers IEEE Instrumentation and Measurement Society IEEE Aerospace and Electronic Systems Society et al. 2019. IEEE International Workshop on Metrology for AeroSpace (MetroAeroSpace) Proceedings: Torino Italy; June 19–21 2019. n.d.
46. Alsharari M, , Chen B, , Shu W. 3D printing of highly stretchable and sensitive strain sensors using graphene based composites. Proceedings, 2018; 2:792; doi: 10.3390/proceedings2130792
47. 10.1088/1361-665X/ab1fa910.1088/1361-665X/ab1fa9 ↗
48. 10.3390/s1705116610.3390/s17051166 ↗
49. 10.1016/j.jmapro.2021.12.02010.1016/j.jmapro.2021.12.020 ↗
50. 10.3390/polym1101001110.3390/polym11010011 ↗
51. Arh M, , Slavič J, , Boltežar M. Experimental identification of the dynamic piezoresistivity of fused-filament-fabricated structures. Addit Manuf, 2020; 36; doi: 10.1016/j.addma.2020.101493
52. Georgopoulou A, , Diethelm P, , Wagner M, et al. Soft self-regulating heating elements for thermoplastic elastomer-based electronic skin applications. 3D Print Addit Manuf, 2023; doi: 10.1089/3dp.2022.0242
53. 10.1007/978-3-031-38274-1_4710.1007/978-3-031-38274-1_47 ↗
54. 10.1038/s41378-021-00347-x10.1038/s41378-021-00347-x ↗
55. SK D, , Kallippatti Lakshmanan SK. Sensitivity enhancement through geometry modification of 3D printed conductive PLA-based strain sensors. Rapid Prototyp J, 2023; doi: 10.1108/RPJ-02-2023-0069