Aqueous tape casting of lithium metazirconate (Li2ZrO3) thin sheets
Source abstract
Abstract
[EN] Tape cast Li2ZrO3 thin sheets were successfully made from aqueous suspensions with 30 vol% solid loading, using 0.5 wt% of ammonium polyacrylate and 0.2 wt% of tetramethyl ammonium hydroxide as organic stabilizers. The addition of 15 wt% of acrylic binder emulsion into the slip enabled to cast green tapes with suitable strength and plasticity for their easy folding. Zeta potential and rheological flow curves were analyzed to optimize the slip stability and composition, and the thermal behavior, phase composition and microstructure of the tapes were evaluated. After sintering at 1200 °C/15 h, tapes reached bulk densities close to 81% vs TD and exhibited a smooth flawless surface. SEM images showed an average particle size of 6.2 µm, and the XRD phase analysis revealed monoclinic Li2ZrO3 and only 6% of ZrO2. Overall, this detailed work will be relevant for further research on the manufacture of solid-state electrolytes based on Li2ZrO3 tapes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Ferroelectric and Piezoelectric Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (87)
Show source-provided references
1. The transcendental role of lithium zirconates in the development of modern energy technologies10.1016/j.ceramint.2022.01.056 ↗
2. Pebble fabrication of super advanced tritium breeders using a solid solution of Li2+xTiO3+y with Li2ZrO310.1016/j.nme.2016.05.004 ↗
3. A first-principles density function theory study of tritium diffusion in Li2ZrO3: application for producing tritium10.1021/acs.jpcc.8b05810 ↗
4. Fabrication of Li4SiO4-Li2ZrO3 composite pebbles using extrusion and spherodization technique with improved crush load and moisture stability10.1016/j.jnucmat.2018.12.011 ↗
5. Fabrication of submicron Li‐rich Li2(Ti,Zr)O3 solid solution ceramics with sluggish grain growth rate10.1111/jace.18781 ↗
6. Comparative study of lithium-based CO2 sorbents at high temperature: Experimental and modeling kinetic analysis of the carbonation reaction10.1016/j.jece.2020.104173 ↗
7. Study of the sorption properties of alkali zirconate-based sorbents at high temperature in the presence of water and low CO2 concentration10.1016/j.jallcom.2021.162419 ↗
8. Review of carbon capture and methane production from carbon dioxide10.3390/atmos13121958 ↗
9. Electrochemical performance and lithium-ion insertion/extraction mechanism studies of the novel Li2ZrO3 anode materials10.1016/j.electacta.2015.01.220 ↗
10. Li2ZrO3-coated Li4Ti5O12 with nanoscale interface for high performance lithium-ion batteries10.1016/j.apsusc.2016.01.244 ↗
11. Study on (100-x)(70Li2S-30P2S5)-xLi2ZrO3 glass-ceramic electrolyte for all-solid-state lithium-ion batteries10.1016/j.jpowsour.2017.04.083 ↗
12. Amorphous Li2ZrO3 nanoparticles coating Li[Li0.17Mn0.58Ni0.25]O2 cathode material for enhanced rate and cyclic performance in lithium ion storage10.1016/j.matchemphys.2020.123593 ↗
13. Ultrahigh capacity retention of a Li2ZrO3-coated Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material through covalent interfacial engineering10.1021/acsaem.1c02526 ↗
14. The effect of platinum-coatings on hydrogen- and water-absorption and desorption characteristics of lithium zirconate10.1016/j.phpro.2015.05.036 ↗
15. Lithium zirconate coated LiNi0.8Co0.15Al0.05O2 as a high-performance electrode material for advanced fuel cells10.1016/j.ceramint.2022.02.263 ↗
16. Lithium zirconate as solid catalyst for simultaneous esterification and transesterification of low quality triglycerides10.1016/j.apcata.2014.10.013 ↗
17. Effect of preparation conditions on structural and catalytic properties of lithium zirconate10.1016/j.ceramint.2015.09.068 ↗
18. Lithium zirconate as a selective and cost-effective mixed metal oxide catalyst for glycerol carbonate production10.1021/acs.iecr.9b05747 ↗
19. Preparation of polyvinyl alcohol–lithium zirconate nanocomposite films and analysis of transmission, absorption, emission features, and electrical properties10.1021/jp311828n ↗
20. Characterization and optical properties of m-Li2ZrO3 prepared by optimized solid-state reaction10.1016/j.apt.2022.103514 ↗
21. Inelastic scattering and first principles study of tritium breeder materials Li2TiO3 and Li2ZrO310.1016/j.radphyschem.2022.110630 ↗
22. Preparation, characterization and visible light photocatalytic studies of Ag/AgBr/Li2ZrO3 composite10.1016/j.inoche.2022.109504 ↗
23. Phase relations in the system Li2O-ZrO210.1016/0022-3115(89)90560-6 ↗
24. Phase stability investigations in the ceramic breeder systems Li2O-Al2O3 and Li2O-ZrO2
25. Structural and anisotropic thermal expansion correlation of Li2ZrO3 at different temperatures10.1107/S0021889802011214 ↗
26. Li2ZrO3: A new polymorph with the α-LiFeO2 structure10.1016/0025-5408(89)90144-X ↗
27. Improved electrochemical performance of layered LiNi0.4Co0.2Mn0.4O2 via Li2ZrO3 coating10.1016/j.electacta.2007.11.026 ↗
28. Li4Ti5O12 composited with Li2ZrO3 revealing simultaneously meliorated ionic and electronic conductivities as high performance anode materials for Li-ion batteries10.1016/j.jpowsour.2017.04.028 ↗
29. Boosted electrochemical performance of Li2ZnTi3O8 enabled by ion-conductive Li2ZrO3 concomitant with superficial Zr-doping10.1016/j.jpowsour.2018.01.064 ↗
30. Unraveling the multiple effects of Li2ZrO3 coating on the structural and electrochemical performances of LiCoO2 as high-voltage cathode materials10.1016/j.electacta.2016.05.066 ↗
31. Li2ZrO3-coated monocrystalline LiAl0.06Mn1.94O4 particles as cathode materials for lithium-ion batteries10.3390/nano11123223 ↗
32. Addressing voltage decay in Li-rich cathodes by broadening the gap between metallic and anionic bands10.1038/s41467-021-23365-9 ↗
33. Enhanced electrochemical performance of Li2ZrO3 coated LiFePO4 as cathode material for lithium ion batteries10.20964/2022.07.29 ↗
34. Enhancement of Li2ZrO3 Modification of the Cycle Life of N/S-Doped LiMn0.5Fe0.5PO4/C Composite Cathodes for Lithium Ion Batteries10.1021/acs.langmuir.3c00244 ↗
35. Synthesis and electrochemical Li-storage performance of Li2ZrO3-Li3V2(PO4)3/C composites10.1016/j.elecom.2020.106908 ↗
36. Decoration by dual-phase Li2ZrO3 islands with core–shell structures enhances the electrochemical performance of high-voltage LiNi0.5Mn1.5O410.1063/1.5130432 ↗
37. Optimization mechanism of Li2ZrO3-modified lithium-rich cathode material Li[Li0.2Ni0.2Mn0.6]O2 for lithium-ion batteries10.1007/s10854-021-05503-7 ↗
38. Synergistic effects of Zr doping and Li2ZrO3/WO3 co-coating on the physicochemical and electrochemical properties of cobalt-free LiNi0.8Mn0.2O2
39. Temperature dependent electrochemical performance of LiNi0.6Co0.2Mn0.2O2 coated with Li2ZrO3 for Li-ion batteries10.1007/s10832-021-00229-8 ↗
40. Increased performance improvement of lithium-ion batteries by dry powder coating of high-nickel NMC with nanostructured fumed ternary lithium metal oxides10.1021/acsaem.1c00939 ↗
41. Dual-element-modified single-crystal LiNi0.6Co0.2Mn0.2O2 as a highly stable cathode for lithium-ion batteries10.1021/acsami.1c10799 ↗
42. Surface-modified quaternary layered Ni-rich cathode materials by Li2ZrO3 for improved electrochemical performance for high-power Li-ion batteries10.1021/acsaem.2c00224 ↗
43. Surface functionalization of LiNi7.0Co0.15Mn0.15O2 with Fumed Li2ZrO3 via a cost‐effective dry‐coating process for enhanced performance in solid‐state batteries10.1002/batt.202200100 ↗
44. Effect of lithium to zirconium ratio on microstructure and electrochemical performances of LZO modified LiNi0.8Co0.1Mn0.1O2 cathode materials
45. Li2ZrO3 based Li-ion conductors doped with halide ions & sintered in oxygen-deficient atmosphere10.1016/j.ceramint.2021.08.076 ↗
46. Electrical conductivity of Al-doped Li2ZrO3 ceramics for Li-ion conductor electrolytes10.1016/j.ceramint.2021.03.108 ↗
47. Li ion conduction in Li2ZrO3, Li4ZrO4, and LiScO210.1016/0167-2738(81)90021-7 ↗
48. Synthesis and electrical properties of lithium metazirconate10.1023/A:1026672202194 ↗
49. Tarakina, Synthesis and physicochemical properties of Li2MexZr1−xO3−δ (Me = Nb, Ti; x = 0.05, 0.1) solid solutions10.3103/S1062873814040054 ↗
50. Electric conductivity of lithium metazirconate10.1134/S1023193518090033 ↗
51. Nonstoichiometry and Li‐ion transport in lithium zirconate: The role of oxygen vacancies10.1111/jace.15583 ↗
52. Effect of dopants on the lithium metazirconate conductivity10.1134/S1023193520060075 ↗
53. Understanding slurry formulations to guide solution-processing of solid electrolytes10.1016/j.jpowsour.2022.231894 ↗
54. The role of slip additives in tape-casting technology. Part I: Solvents and dispersants
55. The role of slip additives in tape casting technology. Part II: Binders and plasticizers
56. The tape casting process for manufacturing low‐temperature co‐fired ceramic green sheets: A review10.1111/jace.15694 ↗
57. Tape casting and lamination
58. Tape casting technique for fabrication of piezoelectric ceramics and other multilayered devices-a review10.37155/2717-526X-0302-1 ↗
59. Tape casting and sintering of Li7La3Zr1.75Nb0.25Al0.1O12 with Li3BO3 additions10.1016/j.ssi.2018.05.015 ↗
60. Preparation of high-density garnet thin sheet electrolytes for all-solid-state Li-Metal batteries by tape-casting technique10.1016/j.jallcom.2019.03.409 ↗
61. Tape casting manufacturing of thick Li4Ti5O12 ceramic electrodes with high areal capacity for lithium-ion batteries10.1016/j.jeurceramsoc.2020.07.049 ↗
62. Tape casted thin films of solid electrolyte lithium-lanthanum-titanate10.1016/j.ssi.2018.10.028 ↗
63. Tape‐casting Li0.34La0.56TiO3 ceramic electrolyte films permit high energy density of lithium‐metal batteries10.1002/adma.201906221 ↗
64. Optimization of the tape casting slurries for high-quality zirconia substrates10.1016/j.ceramint.2017.09.099 ↗
65. Dense m-Li2ZrO3 formed by aqueous slip casting technique: Colloidal and rheological characterization10.1016/j.ceramint.2022.11.036 ↗
66. Non-isothermal reaction mechanism and kinetic analysis for the synthesis of monoclinic lithium zirconate (m-Li2ZrO3) during solid-state reaction10.1186/s40543-021-00267-5 ↗
67. Colloidal methods
68. Dispersion and solution processes
69. Colloidal processing of ceramics10.1111/j.1151-2916.2000.tb01560.x ↗
70. Better ceramics through colloid chemistry10.1016/j.jeurceramsoc.2019.10.014 ↗
71. Review of the measurement of zeta potentials in concentrated aqueous suspensions using electroacoustics10.1016/S0001-8686(03)00105-2 ↗
72. Colloidal stability of aqueous suspensions of barium zirconate10.1016/j.jeurceramsoc.2004.07.007 ↗
73. Synthesis and characterization of a H+ exchanged zirconate10.1002/zaac.200570041 ↗
74. Polymeric stabilisation of aqueous suspensions of barium titanate. Part I: Effect of pH10.1016/S0955-2219(99)00240-X ↗
75. Correlation of alumina flocculation with adsorbed polyacrylic acid conformation10.1016/0166-6622(90)80198-D ↗
76. The role of ammonium polyacrylate in dispersing concentrated alumina suspensions10.1016/S0955-2219(00)00012-1 ↗
77. Stability of aqueous alpha-Al2O3 suspensions with poly(methacrylic acid) polyelectrolyte10.1111/j.1151-2916.1988.tb05855.x ↗
78. Potentiometric titration of polyacrylic and polymethacrylic acids with alkali metal and quaternary ammonium bases10.1002/pol.1957.1202310338 ↗
79. Polyacrylate protonation in various aqueous ionic media at different temperatures and ionic strengths10.1021/je0000219 ↗
80. Tadros · 2010
81. Effect of tetramethyl ammonium hydroxide on rheological properties of aqueous zirconia suspensions with polyacrylate10.1016/j.colsurfa.2008.04.007 ↗
82. Colloidal processing of highly concentrated aqueous copper suspensions10.1016/j.powtec.2014.01.059 ↗
83. Process for the preparation of lithium metazirconate10.1016/0022-3115(91)90207-N ↗
84. Thermal behaviour of amorphous Li2ZrO3 prepared by sol-gel technique10.1007/BF01979383 ↗
85. Preparation via gelling of porous Li2ZrO3 for fusion reactor blanket material10.1007/BF00545453 ↗
86. Lithium metazirconate for nuclear application: physical and mechanical properties10.1007/BF00361513 ↗
87. Thermodynamic stability of the lithium zirconates and lithium yttrate10.1016/0022-3697(94)90154-6 ↗