journal article·2013-11

Preliminary investigation of flash sintering of SiC

E. Zapata-Solvas, S. Bonilla, P.R. Wilshaw, R.I. Todd

Journal of the European Ceramic Society· Volume 33· Issue 13-14
Publisher page

Abstract

Abstract The feasibility of flash sintering a covalent ceramic, SiC, has been investigated for the first time. Flash sintering involves the application of an electrical potential difference across a powder compact during heating, which leads to sintering at low furnace temperatures in a few seconds and has only been demonstrated with ionic ceramics previously. Near-theoretical density was achieved using Al 2 O 3 + Y 2 O 3 sintering aids at a furnace temperature of only 1170 °C and in a time of 150 s. Specimen temperatures were significantly higher than the furnace temperature owing to Joule heating and consequently heat loss limited densification in the near surface region. It was not possible to reach high densities using “ABC” sintering aids (aluminium–boron–carbon) or pure SiC. The mechanisms involved and potential commercial advantages are briefly discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Rahaman · 1995
2. Consolidation enhancement in spark-plasma sintering: impact of high heating rates10.1063/1.2822189 ↗
3. Influence of externally imposed and internally generated electrical fields on grain growth, diffusional creep, sintering and related phenomena in ceramics10.1111/j.1551-2916.2011.04652.x ↗
4. Flash sintering of nanograin zirconia in <5s at 850°C10.1111/j.1551-2916.2010.04089.x ↗
5. Flash welding in yttria stabilized zirconia10.1016/j.jeurceramsoc.2011.02.030 ↗
6. Particle size effects in flash sintering10.1016/j.jeurceramsoc.2012.04.028 ↗
7. Joule heating during flash-sintering10.1016/j.jeurceramsoc.2012.02.030 ↗
8. Flash sintering of cubic yttria-stabilized zirconia at 750°C for possible use in SOFC manufacturing10.1111/j.1551-2916.2010.04267.x ↗
9. Field assisted and flash sintering of alumina and its relationship to conductivity and MgO-doping10.1016/j.jeurceramsoc.2011.07.004 ↗
10. Defect structure of flash sintered strontium titanate10.1111/j.1551-2916.2012.05240.x ↗
11. Flash-sintering of Co2MnO4 spinel for solid oxide fuel cell applications10.1016/j.jpowsour.2010.10.036 ↗
12. Densification and enhancement of the grain boundary conductivity of gadolinium-doped barium cerate by ultra fast flash grain welding10.1016/j.jeurceramsoc.2012.01.032 ↗
13. Development of silicon nitride/silicon carbide composites for cutting tools10.1016/j.jeurceramsoc.2006.02.040 ↗
14. High-toughness silicon carbide as armour10.1111/j.1551-2916.2005.00415.x ↗
15. Silicon carbide electronic materials and devices10.1557/S0883769400032711 ↗
16. Silicon carbide heating elements10.1016/S0272-8842(97)00024-2 ↗
17. Pressureless sintering of silicon carbide10.1007/BF01756807 ↗
18. Consolidation of nanostructured SiC with disorder–order transformation10.1016/j.scriptamat.2003.09.027 ↗
19. Densification of additive-free polycrystalline β-SiC by spark plasma sintering10.1016/j.ceramint.2011.06.036 ↗
20. Liquid phase sintering of silicon carbide10.1016/0955-2219(95)00129-8 ↗
21. Effects of additives on densification, microstructure and properties of liquid-phase sintered silicon carbide10.1023/A:1004881430804 ↗
22. Effect of microstructure on sliding-wear properties of liquid-phase-sintered α-SiC10.1016/j.scriptamat.2007.05.021 ↗
23. Huge effect of weak dc electrical fields on grain growth in zirconia10.1111/j.1551-2916.2009.03102.x ↗
24. Enhanced grain boundary mobility in yttria-stabilized cubic zirconia under an electric current10.1111/j.1551-2916.2011.04800.x ↗
25. Fabrication principles for the production of ceramics with superior mechanical properties