journal article·2017-03

Modification and characterization of electrospun poly (vinylidene fluoride)/poly (acrylonitrile) blend separator membranes

Yun Zhu, Ming Yin, Hesheng Liu, Bing Na, Ruihua Lv, Bin Wang, Yanghui Huang

Publisher page

Abstract

Abstract Electrospun polymer membranes have great potentials as separators for lithium-ion batteries due to their high porosity. However, electrospun membranes usually suffer from low mechanical strength because of weak bonding at inter-fiber junctions. In this study, high mechanical strength over 20 MPa is achieved for poly (vinylidene fluoride) (PVDF)/poly (acrylonitrile) (PAN) blend membranes at a ratio of 5/5 after modification by a PVDF dilute solution. Moreover, good dimensional stability at 200 °C is exhibited the modified blend membranes due to the presence of continuous PAN nanofibrils. Separators based on the modified blend membranes impart lithium-ion batteries with superior discharge capacity and cyclic performance.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Sensor and Energy Harvesting Materials · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Building better batteries10.1038/451652a ↗
2. Nanostructured electrode materials for electrochemical energy storage and conversion10.1039/b811802g ↗
3. Research on advanced materials for Li-ion batteries10.1002/adma.200901710 ↗
4. Silicon nanowire reinforced by single-walled carbon nanotube and its applications to anti-pulverization electrode in lithium ion battery10.1016/j.compositesb.2011.04.034 ↗
5. Reversible and high-capacity nanostructured electrode materials for Li-ion batteries10.1002/adfm.200801095 ↗
6. Biomediated green synthesis of TiO2 nanoparticles for lithium ion battery application10.1016/j.compositesb.2016.06.015 ↗
7. Functional materials for rechargeable batteries10.1002/adma.201003587 ↗
8. Synthesis, characterization and polymer battery fabrication of hot-pressed ion conducting nano-composite polymer electrolytes10.1016/j.compositesb.2013.12.071 ↗
9. Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives10.1039/c0cs00081g ↗
10. Microporous PVdF-HFP based gel polymer electrolytes reinforced by PEGDMA network10.1016/j.elecom.2004.04.001 ↗
11. Optimization of filler type within poly(vinylidene fluoride-co-trifluoroethylene) composite separator membranes for improved lithium-ion battery performance10.1016/j.compositesb.2016.04.041 ↗
12. Lithium ion conduction and ion-polymer interaction in PVdF-HFP based gel polymer electrolytes10.1016/j.ssi.2014.10.012 ↗
13. Heat-resistant silica nanoparticle enhanced polysulfonamide nonwoven separator for high-performance lithium ion battery10.1149/2.043306jes ↗
14. Electrospun polyimide-composite separator for lithium-ion batteries10.1016/j.electacta.2015.04.142 ↗
15. Correlation between electrochemical characteristics and thermal stability of advanced lithium-ion batteries in abuse tests—short-circuit tests10.1016/j.electacta.2003.12.012 ↗
16. Enhanced wetting properties of a polypropylene separator for a lithium-ion battery by hyperthermal hydrogen induced cross-linking of poly (ethylene oxide)10.1039/C4TA01870B ↗
17. Influence of the porosity degree of poly(vinylidene fluoride-cohexafluoropropylene) separators in the performance of Li-ion batteries10.1016/j.jpowsour.2014.04.014 ↗
18. Gel polymer electrolytes based on active PVDF separator for lithium ion battery. I: preparation and property of PVDF/poly(dimethylsiloxane) blending membrane10.1016/j.memsci.2011.06.008 ↗
19. Polyvinylidene fluoride membrane by novel electrospinning system for separator of Li-ion batteries10.1016/j.jpowsour.2008.08.060 ↗
20. Preparation of PVdF nanofiber membranes by electrospinning and their use as secondary battery separators10.1016/j.memsci.2011.06.005 ↗
21. Heat treatment of electrospun Polyvinylidene fluoride fibrous membrane separators for rechargeable lithium-ion batteries10.1016/j.jpowsour.2013.04.019 ↗
22. An electrospun poly (vinylidene fluoride) nanofibrous membrane and its battery applications10.1002/adma.200304617 ↗
23. Poly(vinylidene fluoride)/SiO2 composite membranes prepared by electrospinning and their excellent properties for nonwoven separators for lithium-ion batteries10.1016/j.jpowsour.2013.11.079 ↗
24. Properties of electrospun PVDF/PMMA/CA membrane as lithium based battery separator10.1007/s10570-014-0296-1 ↗
25. A review on electrospinning for membrane fabrication: challenges and applications10.1016/j.desal.2014.09.033 ↗
26. Electrospinning: a fascinating fiber fabrication technique10.1016/j.biotechadv.2010.01.004 ↗
27. Understanding polymorphism formation in electrospun fibers of immiscible Poly(vinylidene fluoride) blends10.1016/j.polymer.2011.03.024 ↗
28. Toughening of nylon-6 by semicrystalline poly(vinylidene fluoride): role of phase transformation and fibrillation of dispersed particles10.1021/ma1002744 ↗
29. Effect of blend ratio on the morphology and electromagnetic properties of nanoparticles incorporated natural rubber blends10.1016/j.compositesb.2016.06.017 ↗
30. Improved performance of PVdF-HFP/PI nanofiber membrane for lithium ion battery separator prepared by a bicomponent cross-electrospinning method10.1016/j.matlet.2014.06.163 ↗
31. Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications10.1039/c3ra40732b ↗
32. Polymer composites and blends for battery separators: state of the art, challenges and future trends10.1016/j.jpowsour.2015.02.010 ↗
33. Partially oxidized polyacrylonitrile nanofibrous membrane as a thermally stable separator for lithium ion batteries10.1016/j.polymer.2015.04.055 ↗
34. A high temperature operating nanofibrous polyimide separator in Li-ion battery10.1016/j.ssi.2012.11.010 ↗
35. Development of electrospun PVdF-PAN membrane-based polymer electrolytes for lithium batteries10.1016/j.memsci.2008.08.047 ↗
36. Preparation and electrochemical characterization of polymer electrolytes based on electrospun poly (vinylidene fluoride-co-hexafluoropropylene)/polyacrylonitrile blend/composite membranes for lithium batteries10.1016/j.jpowsour.2009.11.098 ↗
37. Renewable and superior thermal-resistant cellulose-based composite nonwoven as lithium-ion battery separator10.1021/am302290n ↗
38. Eco-friendly cellulose nanofiber paper-derived separator membranes featuring tunable nanoporous network channels for lithium-ion batteries10.1039/c2jm32415f ↗