journal article·2022-01

Understanding and representing heating and heating rate effects on composite material properties for lightning strike direct effect simulations

S.L.J. Millen, S. Ashworth, C. Farrell, A. Murphy

Publisher page

Abstract

Abstract Lightning strike simulations have used decomposition models, derived from TGA experiments, to model material behaviour at elevated heating rates and temperatures. Such experiments, conducted non-isothermally and at low heating rates, are extrapolated to conditions assumed during a lightning strike event. However, no experiments have been carried out in literature to verify and understand the impact of these extrapolation assumptions. This work seeks to understand the influence of the approach used to adjust material properties to reflect heating rates present during a lightning strike, which cannot be achieved in TGA experiments. A combination of experimental and simulation studies were undertaken, including prediction sensitivity analysis through simulation, experiments conducted at a variety of heating rates, thermokinetic modelling to extrapolate data, and finally further thermal-electric models to demonstrate the effect of predicted heating rate on thermal damage. It is demonstrated that the extrapolation approach for heating rate can impact thermal damage predictions. For the studied lightning strike tests and using a maximum heating rate extrapolation (20,000 °C/min), herein, damage predictions are improved, reducing the error in predicted severe damage area to within 8% of the experimental values.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Lightning and Electromagnetic Phenomena · Fire dynamics and safety research · Combustion and Detonation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. Aerospace · 1999
2. Artificial lightning testing on graphite/epoxy composite laminate10.1016/j.compositesa.2010.06.008 ↗
3. Impulse effects during simulated lightning attachments to lightweight composite panels
4. Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike10.1016/j.compositesa.2009.04.025 ↗
5. Damage of carbon/epoxy composite plates subjected to mechanical impact and simulated lightning10.2514/1.46486 ↗
6. Modeling lightning impact thermo-mechanical damage on composite materials10.1007/s10443-013-9377-9 ↗
7. Kawakami · 2011
8. Damage characteristics of CFRP laminates subjected to multiple lightning current strike10.1007/s10443-018-9747-4 ↗
9. Damage analysis of carbon fiber composites exposed to combined lightning current components D and C10.1016/j.compscitech.2019.04.030 ↗
10. Evaluation method for lightning damage of carbon fiber reinforced polymers subjected to multiple lightning strikes with different combinations of current components10.1177/0021998319860562 ↗
11. Lightning arc channel effects on surface damage development on a PRSEUS composite panel: an experimental study10.1016/j.compositesb.2021.109217 ↗
12. Artificial lightning strike tests on PRSEUS panels10.1016/j.compositesb.2018.09.016 ↗
13. Fabrication of the silver modified carbon nanotube film/carbon fiber reinforced polymer composite for the lightning strike protection application10.1016/j.compositesb.2019.107563 ↗
14. Damage in CFRP composites subjected to simulated lighting strikes - assessment of thermal and mechanical responses10.1016/j.compositesb.2019.107298 ↗
15. Coupled thermal-electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current10.1016/j.compositesa.2010.04.001 ↗
16. Nonlinear numerical modelling of lightning strike effect on composite panels with temperature dependent material properties10.1016/j.compstruct.2013.11.007 ↗
17. Understanding how arc attachment behaviour influences the prediction of composite specimen thermal loading during an artificial lightning strike test10.1016/j.compstruct.2018.03.039 ↗
18. The coupling mechanism and damage prediction of carbon fiber/epoxy composites exposed to lightning current10.1016/j.compstruct.2018.07.017 ↗
19. Sequential finite element modelling of lightning arc plasma and composite specimen thermal-electric damage10.1016/j.compstruc.2019.06.005 ↗
20. Specimen representation on the prediction of artificial test lightning plasma, resulting specimen loading and subsequent composite material damage10.1016/j.compstruct.2019.111545 ↗
21. Quantifying the influence of lightning strike pressure loading on composite specimen damage10.1007/s10443-018-9685-1 ↗
22. Modelling mechanical lightning loads in carbon fibre-reinforced polymers10.1016/j.ijsolstr.2018.12.013 ↗
23. Lightning mechanical damage prediction in carbon/epoxy laminates using equivalent air blast overpressure10.1016/j.compositesb.2021.108649 ↗
24. Modelling of mechanical failure due to constrained thermal expansion at the lightning arc attachment point in carbon fibre epoxy composite material10.1016/j.engfailanal.2018.08.003 ↗
25. Coupled thermal-mechanical damage model of laminated carbon fiber/resin composite subjected to lightning strike10.1016/j.compstruct.2018.08.043 ↗
26. Coupled thermal-mechanical progressive damage model with strain and heating rate effects for lightning strike damage assessment10.1007/s10443-019-09789-z ↗
27. 2017
28. A multiphysics simulation approach for efficient modeling of lightning strike tests on aircraft structures10.1109/TPS.2017.2673543 ↗
29. Structural stability of composite laminated column exposed to high temperature or fire10.1177/002199803029726 ↗
30. Standard test method for tensile properties of polymer matrix composite materials
31. Standard test method for compressive properties of polymer matrix composite materials with unsupported gage section by shear
32. Effect of thermal lag on glass transition temperature of polymers measured by DMA10.1016/j.ijadhadh.2014.03.009 ↗
33. Kinetics of pyrolysis mass loss from cured phenolic resin10.2514/3.667 ↗
34. Fabrication of an enriched graphene surface protection of carbon fiber/epoxy composites for lightning strike via a percolating-assisted resin film infusion method10.1016/j.compscitech.2018.01.047 ↗
35. Lightning ablation suppression of aircraft carbon/epoxy composite laminates by metal mesh10.1016/j.jmst.2019.07.010 ↗
36. Lightning strike damage on the composite laminates with carbon nanotube films: protection effect and damage mechanism10.1016/j.compositesb.2019.03.054 ↗
37. Computational investigation of effects of expanded metal foils on the lightning protection performance of a composite rotor blade
38. Lightning damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermoset matrix10.1016/j.compscitech.2016.02.022 ↗
39. Factors affecting direct lightning strike damage to fiber reinforced composites: a review10.1016/j.compositesb.2019.107688 ↗
40. Effect of through-thickness electrical conductivity of CFRPs on lightning strike damages10.1016/j.compositesa.2018.09.007 ↗
41. Investigating the effects of metallic submicron and nanofilms on fiber-reinforced composites for lightning strike protection and EMI shielding10.1007/s42114-020-00135-7 ↗
42. Modelling of lightning-induced dynamic response and mechanical damage in CFRP composite laminates with protection
43. Lightning surface explosion impact study on damage generation into composite
44. Bigand · 2019
45. Lightning current transfer risk assessment after skin puncture
46. Conductive paints development through nanotechnology10.1016/j.porgcoat.2016.03.001 ↗
47. Modeling electro-thermal effects of lightning strike on anisotropic composites10.3233/JAE-190045 ↗
48. Modelling and analysis of simulated lightning strike tests: a review10.1016/j.compstruct.2021.114347 ↗
49. Multiphysics analysis of lightning strike damage in laminated carbon/glass fiber reinforced polymer matrix composite materials: a review of problem formulation and computational modeling10.1016/j.compositesa.2017.07.010 ↗
50. Understanding the impact of standardized SAE waveform parameter variation on artificial lightning plasma, specimen loading and composite material damage10.4271/01-13-01-0002 ↗
51. Research on the blow-off impulse effect of a composite reinforced panel subjected to lightning strike10.3390/app9061168 ↗
52. Modelling and understanding edge glow effects on material failure resulting from artificial lightning strike10.1016/j.compstruct.2021.114651 ↗
53. The interaction of lightning with aircraft and the challenges of lightning testing
54. Lightning protection of carbon fibre reinforced plastics - an Overview,” in 2016 33rd International Conference on Lightning Protection
55. Lightning strike protection of composites10.1016/j.paerosci.2013.07.002 ↗
56. Improving the through-thickness thermal and electrical conductivity of carbon fibre/epoxy laminates by exploiting synergy between graphene and silver nano-inclusions10.1016/j.compositesa.2014.10.024 ↗
57. Polyaniline-based all-polymeric adhesive layer: an effective lightning strike protection technology for high residual mechanical strength of CFRPs10.1016/j.compscitech.2019.01.006 ↗
58. Nickel-coated nylon sandwich film for combination of lightning strike protection and electromagnetic interference shielding of CFRP composite
59. 3D printed nickel-plated carbon fiber mesh for lightning strike protection10.1016/j.matlet.2021.129809 ↗
60. An experimental study of impulse-current-induced mechanical effects on laminated carbon fibre-reinforced polymer composites10.1016/j.compositesb.2021.109245 ↗
61. Coupled electrical-thermal-pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike
62. Delamination analysis of CFRP laminates exposed to lightning strike considering cooling process10.1016/j.compstruct.2018.05.003 ↗
63. Lightning strike ablation damage influence factors analysis of carbon fiber/epoxy composite based on coupled electrical-thermal simulation
64. Comparison between temperature and pyrolysis dependent models to evaluate the lightning strike damage of carbon fiber composite laminates10.1016/j.compositesa.2017.02.022 ↗
65. Influencing factor analysis based on electrical-thermal-pyrolytic simulation of carbon fiber composites lightning damage10.1016/j.compstruct.2015.12.033 ↗
66. Foster · 2018
67. Modelling behaviour of a carbon epoxy composite exposed to fire: Part I-Characterisation of thermophysical properties
68. Pyrolysis kinetic modelling of abundant plastic waste (PET) and in-situ emission monitoring10.1186/s12302-020-00390-x ↗
69. Investigation of thermal degradation and decomposition of both pristine and damaged carbon/epoxy samples with thermal history10.1016/j.compositesb.2020.108382 ↗
70. Polymer pyrolysis over a wide range of heating rates10.2514/3.7435 ↗
71. Kinetic analysis of the thermal decomposition of a carbon fibre-reinforced epoxy resin laminate10.1016/j.jaap.2017.07.002 ↗
72. Measurement of kinetics and thermodynamics of the thermal degradation for charring polymers10.1016/j.polymdegradstab.2013.09.022 ↗
73. Processing-property relationships of biaxially stretched poly(L-lactic acid) sheet for application in coronary stents10.1016/j.jmbbm.2018.06.017 ↗
74. Measurements of thermal properties of carbon/epoxy and glass/epoxy using modulated temperature differential scanning calorimetry10.1177/0021998304038647 ↗
75. Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers10.1016/j.compositesa.2019.01.019 ↗
76. Chippendale · 2013
77. Thermal lag and its practical consequence in the dynamic mechanical analysis of polymers10.1016/S0142-9418(99)00046-X ↗
78. Heating rate effects on thermal analysis measurement of Tg in composite materials
79. Thermokinetics of lithium extraction with the novel extraction systems (tri-isobutyl phosphate + ionic liquid + kerosene)10.1016/j.jct.2018.03.026 ↗
80. Application of thermal kinetics software in aging of energetic materials
81. ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data10.1016/j.tca.2011.03.034 ↗
82. Millen · 2021
83. Setaram KEP Technologies · 2016
84. Thermokinetic study of residual solid digestate from anaerobic digestion10.1016/j.cej.2020.127039 ↗
85. Understanding the influence of test specimen boundary conditions on material failure resulting from artificial lightning strike10.1016/j.engfailanal.2020.104577 ↗