Growth of III‐Nitrides on ZnO, LiGaO2, and LiAlO2 Substrates

The use of oxide substrates for growth of III‐nitride materials has been investigated. ZnO did not produce any improvement in InAlN or AlN material quality over that obtained using optimized growth conditions on sapphire or GaAs. This is believed to be due to the poor thermal stability of ZnO and to the absence of the formation of a nitride layer at the substrate surface which acts as both a protective layer and as an aid to nucleation. The poor thermal stability of the ZnO prevented the use of a pre‐growth plasma anneal. Such an anneal was found to produce significant improvement in the surface morphology and structural quality of AlN grown on sapphire. Though (100) and (100) exhibited greater thermal stability, preliminary experiments on growth of GaN on and InN on suggest that, as for sapphire, low temperature buffers may be required to improve nucleation behavior.