Progressive damage modeling in carbon fibers/carbon nanotubes reinforced polymer composites
Source abstract
Abstract
Abstract Damage in carbon fibers/Epoxy laminate composites containing carbon nanotubes (CNTs) is described. This investigation presents the third part of paper series on composite materials based CNTs. Experimental characterization and numerical homogenizations were published in order to obtain effective elastic orthotropic properties. Therefore, the homogenized properties are used as input data for investigation of damage initiation and propagations in the specimens for Open Hole tensile tests. The numerical intralaminar damage model is created under ABAQUS software with Hashin's criteria. The model is formulated according to damage mechanics. The prediction of ply delamination in laminated composites containing CNTs is modeled by using interface elements. The numerical approach is based on the cohesive zone model, provides an efficient description of the delamination growth. The numerical study is performed in the quasi-static regime and an implicit finite element scheme is used. The force-displacement curves obtained numerically shows a good agreement with the experimental.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Composite Structure Analysis and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Experimental and numerical analysis of damage in woven GFRP composites under large-deflection bending10.1007/s10443-011-9242-7 ↗
2. Damage mechanisms in short glass fibre reinforced thermoplastic during in situ microtomography tensile tests10.1016/j.compositesb.2015.12.021 ↗
3. Scale and size effects on dynamic response and damage of Glass/Epoxy tubular structures10.1177/0021998306065287 ↗
4. Residual strength of damaged glass/epoxy tubular structures10.1177/0021998307074144 ↗
5. Damage development in thick composite tubes under impact loading and influence on implosion pressure: experimental observations10.1016/j.compositesb.2004.11.004 ↗
6. Prediction of damage in composite cylinders after impact10.1177/0021998305048733 ↗
7. Cycle-based analysis of damage and failure in advanced composites under fatigue: 1. Experimental observation of damage development within loading cycles10.1016/S0142-1123(02)00170-6 ↗
8. Modeling of reinforced concrete beams strengthened in shear with CFRP: microplane-based approach10.1016/j.compositesb.2016.01.009 ↗
9. Web-flange behavior of pultruded GFRP I-beams: a lattice model for the interpretation of experimental results10.1016/j.compositesb.2016.06.058 ↗
10. Shear failure of RC elements strengthened with steel profiles and CFRP wraps10.1016/j.compositesb.2014.06.009 ↗
11. Mechanical behavior of web-flange junctions of thin-walled pultruded I-profiles: an experimental and numerical evaluation10.1016/j.compositesb.2012.11.001 ↗
12. Simulation of delamination in composites under high-cycle fatigue10.1016/j.compositesa.2006.11.009 ↗
13. Progressive damage and delamination in plain weave S-2 glass/SC-15 composites under quasi-static punch-shear loading10.1016/j.compstruct.2005.09.001 ↗
14. Dynamic response and damage modelling of glass/epoxy tubular structures: numerical investigation10.1016/j.compositesa.2007.10.001 ↗
15. Finite element interface models for the delamination analysis of laminated composites: mechanical and computational issues
16. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models10.1016/j.engfracmech.2006.08.025 ↗
17. Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: definition of interlaminar strengths and elastic stiffness10.1016/j.compstruct.2010.01.012 ↗
18. Inter-laminar and intra-laminar damage evolution in composite panels with skin-stringer debonding under compression10.1016/j.compositesb.2016.03.058 ↗
19. Assessment of debond simulation and cohesive zone length in a bonded composite joint10.1016/j.compositesb.2014.10.024 ↗
20. Modeling damages and cracks growth in composite with a 3D discrete element method10.1016/j.compositesb.2016.01.021 ↗
21. Irreversible constitutive law for modeling the delamination process using interfacial surface discontinuities
22. Numerical simulation of mixed mode progressive delamination in composite materials10.1177/0021998303034505 ↗
23. A damage model for the simulation of delamination in advanced composites under variable mode loading10.1016/j.mechmat.2005.10.003 ↗
24. Experimental and computational investigation of progressive damage accumulation in CFRP composites10.1016/j.compositesb.2012.12.005 ↗
25. Modeling of progressive damage for composites under ballistic impact10.1016/j.compositesb.2016.02.053 ↗
26. Inter-laminar and intra-laminar damage evolution in composite panels with skin-stringer debonding under compression10.1016/j.compositesb.2016.03.058 ↗
27. A gradient Eringen model for functionally graded nanorods10.1016/j.compstruct.2015.06.077 ↗
28. Application of an enhanced version of the Eringen differential model to nanotechnology10.1016/j.compositesb.2016.04.023 ↗
29. An Eringen-like model for Timoshenko nanobeams10.1016/j.compstruct.2015.11.048 ↗
30. Functionally graded Timoshenko nanobeams: a novel nonlocal gradient formulation10.1016/j.compositesb.2016.05.052 ↗
31. A constitutive model for anisotropic damage in fiber-composites10.1016/0167-6636(94)00053-0 ↗
32. A fatigue failure criterion for fiber-reinforced materials10.1177/002199837300700404 ↗
33. Failure criteria for uni-directional fibre composites10.1115/1.3153664 ↗
34. Mechanical properties of carbon nanotubes based polymer composites10.1016/j.compositesb.2016.08.016 ↗
35. Simulation of progressive damage development in braided composite tubes under axial compression10.1016/j.compositesa.2006.10.007 ↗
36. Nonlinear progressive damage model for composite laminates used for low-velocity impact10.1007/s10483-013-1733-7 ↗
37. Modeling of the effect of particles size, particles distribution and particles number on mechanical properties of polymer-clay nano-composites: numerical homogenization versus experimental results10.1016/j.compositesb.2015.09.034 ↗
38. Bouaoune L, Brunet Y, El Moumen A, Kanit T, Mazouz H. Random versus periodic microstructures for elasticity of fibers reinforced composites. Compos Part B Eng;(103):68–73.10.1016/j.compositesb.2016.08.026 ↗
39. Progressive damage modeling in fiber-reinforced materials10.1016/j.compositesa.2007.01.017 ↗
40. An interface debonding law subject to viscous regularization for avoiding instability: application to the delamination problems10.1016/j.engfracmech.2007.12.014 ↗
41. A concise interface constitutive law for analysis of delamination and splitting in composite materials and its application to scaled notched tensile specimens10.1002/nme.1842 ↗
42. Examination of ply cracking in composite laminates with open holes: a moire interferometric and numerical study10.1016/j.compositesa.2005.06.004 ↗
43. An experimental and numerical investigation into the damage mechanisms in notched composites10.1016/j.compositesa.2009.02.021 ↗