The morphological evolution of the oxide products of Si3N4/Al2O3 composite refractory under different oxidizing conditions
Source abstract
Abstract
The reaction behavior of Si3N4/Al2O3 composite at 900–1500°C in dry O2 and Ar containing 20 vol.% H2O for 50 h was investigated using thermogravimetric method. The phase, microstructure and macroscopic cross sections of the products were characterized by X-ray diffraction, scanning electron microscopy with energy dispersive X-ray spectroscopy as well as optical microscopy, respectively. Especially the morphological evolution of mullite, the main oxide product, was investigated. The results show that both the reaction atmosphere and temperature have significant influence on the morphology of the oxide product. Based on experimental results, the reaction kinetics of Si3N4/Al2O3 composite was discussed using the real physical picture model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing
School of Materials Science and Engineering, University of Science and Technology Beijing
References (35)
Show source-provided references
1. 1) X. C. Zhong, Am. Ceram. Soc. Bull., 86, 62–64 (2007).
2. 2) W. Dressler and R. Riedel, Int. J. Refract. Met. Hard Mater., 15, 13–47 (1997).10.1016/S0263-4368(96)00046-7 ↗
3. 3) J. G. Sun, C. M. Deemer, W. A. Ellingson and J. Wheeler, Mater. Eval., 64, 52–60 (2006).
4. 4) O. A. Kaibyshev, N. G. Zaripov, L. V. Petrova and O. Y. Efimov, J. Eng. Phys. Thermophys., 65, 1138–1142 (1993).10.1007/BF00862050 ↗
5. 5) A. E. Martinelli, R. M. Nascimento, T. E. De Andrade, A. J. A. Buschinelli, J. C. L. B. S. Pereira and S. M. Gross, Mater. Sci. Forum, 730, 164–169 (2012).10.4028/www.scientific.net/MSF.730-732.164 ↗
6. 6) O. N. Grigor, Powder Metall. Met. C+, 51, 697–708 (2013).10.1007/s11106-013-9485-y ↗
7. 7) S. Bandyopadhyay, S. Biswas and H. S. Maiti, Key Eng. Mater., 395, 193–208 (2008).10.4028/www.scientific.net/KEM.395.193 ↗
8. 8) A. Nakahira, K. Niihara, J. Ohkijima and T. Hirai, J. Jpn. Soc. Powder Powder Metall., 36, 239–242 (1989).10.2497/jjspm.36.239 ↗
9. 9) W. Z. Zhu, J. H. Gao and Z. S. Ding, J. Mater. Sci., 32, 537–542 (1997).10.1023/A:1018550727099 ↗
10. 10) X. L. Bai, C. J. Huang, J. Wang, B. Zou and H. Liu, Ceram. Int., 41, 12798–12804 (2015).10.1016/j.ceramint.2015.06.115 ↗
11. 11) E. S. Fisher, M. H. Manghnani and J. R. Wang, J. Am. Ceram. Soc., 75, 908–914 (1992).10.1111/j.1151-2916.1992.tb04159.x ↗
12. 12) W. Braue, R. W. Carpenter and D. J. Smith, J. Mater. Sci., 25, 2949–2957 (1990).10.1007/BF00584910 ↗
13. 13) D. S. Fox, E. J. Opila, Q. G. N. Nguyen, D. L. Humphrey and S. M. Lewton, J. Am. Ceram. Soc., 86, 1256–1261 (2003).10.1111/j.1151-2916.2003.tb03461.x ↗
14. 14) A. F. Hampton and H. C. Graham, Oxid. Met., 10, 239–253 (1976).10.1007/BF00618246 ↗
15. 15) T. Suetsuna and T. Ohji, J. Am. Ceram. Soc., 88, 1139–1144 (2005).10.1111/j.1551-2916.2005.00230.x ↗
16. 16) J. Eck, M. Balat-Pichelin, L. Charpentier, E. Bêche and F. Audubert, J. Eur. Ceram. Soc., 28, 2995–3004 (2008).10.1016/j.jeurceramsoc.2008.04.032 ↗
17. 17) Y. Lu, Y. Wang, H. Shen, Z. Pan, Z. Huang and L. Wu, Mater. Sci. Eng., 590, 368–373 (2014).10.1016/j.msea.2013.10.039 ↗
18. 18) T. Otani and M. Hirata, Thin Solid Films, 442, 44–47 (2003).10.1016/S0040-6090(03)00938-6 ↗
19. 19) S. Ogata, N. Hirosaki, C. Kocer and Y. Shibutani, Acta Mater., 52, 233–238 (2004).10.1016/j.actamat.2003.09.008 ↗
20. 20) V. Balaji, A. N. Tiwari and R. K. Goyal, Polym. Eng. Sci., 51, 509–517 (2011).10.1002/pen.21837 ↗
21. 21) M. Maeda, K. Nakamura and M. Yamada, J. Mater. Sci., 25, 3790–3794 (1990).10.1007/BF00575420 ↗
22. 22) Y. G. Gogotsi and F. Porz, Corros. Sci., 33, 627–640 (1992).10.1016/0010-938X(92)90210-T ↗
23. 23) Z. Zheng, R. E. Tressler and K. E. Spear, Corros. Sci., 33, 569–580 (1992).10.1016/0010-938X(92)90205-H ↗
24. 24) G. Blugan, D. Wittig and J. Kuebler, Corros. Sci., 51, 547–555 (2009).10.1016/j.corsci.2008.12.014 ↗
25. 25) D. GaluskovÁ, M. KašiarovÁ, M. Hnatko, D. Galusek, J. Dusza and P. Šajgalík, Corros. Sci., 85, 94–100 (2014).
26. 26) X. M. Hou, K. C. Chou, X. J. Hu and H. L. Zhao, J. Alloys Compd., 459, 123–129 (2008).10.1016/j.jallcom.2007.04.255 ↗
27. 27) X. M. Hou and K. C. Chou, Corros. Sci., 50, 2367–2371 (2008).10.1016/j.corsci.2008.06.006 ↗
28. 28) E. H. Wang, H. Dong, J. H. Chen, K. C. Chou and X. M. Hou, Oxid. Met., 84, 169–184 (2015).10.1007/s11085-015-9549-0 ↗
29. 29) J. Gonzalez-Julian, O. Cedillos-Barraza, S. Döring, S. Nolte, O. Guillon and W. E. Lee, J. Eur. Ceram. Soc., 34, 4157–4166 (2014).10.1016/j.jeurceramsoc.2014.07.015 ↗
30. 30) E. A. Irene and R. Ghez, J. Electrochem. Soc., 124, 1757–1761 (1977).10.1149/1.2133151 ↗
31. 31) T. Nakagiri and K. Kurokawa, Mater. Trans., 45, 334–337 (2004).10.2320/matertrans.45.334 ↗
32. 32) T. Yang, P. L. Qiu, M. Zhang, K. C. Chou, X. M. Hou and B. J. Yan, Int. J. Miner. Metall. Mater., 22, 884–891 (2015).10.1007/s12613-015-1146-3 ↗
33. 33) X. M. Hou and K. C. Chou, Corros. Sci., 52, 1093–1097 (2010).10.1016/j.corsci.2009.12.002 ↗
34. 34) X. M. Hou, X. Lu, B. Peng, B. J. Zhao, M. Zhang and K. C. Chou, Corros. Sci., 58, 278–283 (2012).10.1016/j.corsci.2012.02.004 ↗
35. 35) K. C. Chou and X. M. Hou, J. Am. Ceram. Soc., 92, 585–594 (2009).10.1111/j.1551-2916.2008.02903.x ↗