Growth and characterization of Ca2−xAexAl2SiO7 (Ae = Sr, Ba) piezoelectric single crystals
Source abstract
Abstract
We report the effects of Sr or Ba substitution on the crystal growth and electrical and mechanical properties of Ca2Al2SiO7 (CAS) piezoelectric single crystals, which are suitable for use in high-temperature pressure sensors. Ba was scarcely incorporated in the crystal lattice of CAS. Strontium-substituted CAS single crystal with a nominal chemical composition Ca0.75Sr1.25Al2SiO7 (CSAS125) was grown by the Czochralski method. Although the piezoelectric modulus d′31 of CSAS125 is a bit lower than that of the CAS crystal, the rupture strength of the (XYt)45° rotation cut substrate of CSAS125 crystal was 170 MPa, which was 1.2 times higher than that of CAS crystal. By considering the rupture strength and the apparent piezoelectric d*31 coefficient calculated for the crystal rotation cut of CAS crystal, the CSAS125 crystal substrate with a rotation cut of (XYt)25° was found to indicate a rupture strength of 220 MPa and a piezoelectric d′31 coefficient of approximately 2 pC/N.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Acoustic Wave Resonator Technologies · Ferroelectric and Piezoelectric Materials · Gas Sensing Nanomaterials and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
School of Materials and Chemical Technology, Tokyo Institute of Technology
Institut Lumière Matière, UMR5306 CNRS, Universite de Lyon 1
References (30)
Show source-provided references
1. 1) S. Zhang and F. Yu, J. Am. Ceram. Soc., 94, 3153–3170 (2011).10.1111/j.1551-2916.2011.04792.x ↗
2. 2) S. Zhang, Y. Zheng, H. Kong, J. Xin, E. Frantz and T. R. Shrout, J. Appl. Phys., 105, 114107 (2009).10.1063/1.3142429 ↗
3. 3) T. Taishi, N. Bamba, K. Hoshikawa and I. Yonenaga, J. Cryst. Growth, 311, 205–209 (2008).10.1016/j.jcrysgro.2008.10.008 ↗
4. 4) H. Kong, J. Wang, H. Zhang and X. Yin, J. Cryst. Growth, 292, 408–411 (2006).10.1016/j.jcrysgro.2006.04.069 ↗
5. 5) J. Bohm, E. Chilla, C. Flannery, H.-J. Frohlich, T. Hauke, R. B. Heimann, M. Hengst and U. Straube, J. Cryst. Growth, 216, 293–298 (2000).10.1016/S0022-0248(00)00440-1 ↗
6. 6) S. Zhang, X. Jiang, M. Lapsley, P. Moses and T. R. Shrout, Appl. Phys. Lett., 96, 013506 (2010).10.1063/1.3290251 ↗
7. 7) F. Yu, S. Zhang, X. Zhao, D. Yuan, L. Qin, Q.-M. Wang and T. R. Shrout, IEEE Trans. Ultr. Ferro. Freq. Contr., 58, 868–873 (2011).10.1109/TUFFC.2011.1881 ↗
8. 8) P. Krempl, G. Schleinzer and W. Wallnöfer, Sensor. Actuat. A-Phys., 61, 361–363 (1997).10.1016/S0924-4247(97)80289-0 ↗
9. 9) D. V. Balitsky, E. Philippot, Ph. Papet, V. S. Balitsky and F. Pey, J. Cryst. Growth, 275, e887–e894 (2005).10.1016/j.jcrysgro.2004.11.028 ↗
10. 10) Y. Ooishi, H. Noma, K. Kishi, N. Ueno, M. Akiyama and T. Kamohara, J. Ceram. Soc. Jpn., 113, 700–702 (2005).10.2109/jcersj.113.700 ↗
11. 11) M. Akiyama, T. Kamohara, K. Kano, A. Teshigahara, Y. Takeuchi and N. Kawahara, Adv. Mater., 21, 593–596 (2009).10.1002/adma.200802611 ↗
12. 12) H. Takeda, M. Hagiwara, H. Noguchi, T. Hoshina, T. Takahashi, N. Kodama and T. Tsurumi, Appl. Phys. Lett., 102, 242907 (2013).10.1063/1.4811163 ↗
13. 13) M. Hagiwara, H. Noguchi, T. Hoshina, H. Takeda, S. Fujiwara, N. Kodama and T. Tsurumi, Jpn. J. Appl. Phys., 52, 09KD03 (2013).10.7567/JJAP.52.09KD03 ↗
14. 14) C. Shen, Y. Zhang, H. Yu, S. Zhang, W. Cao, J. Wang and H. Zhang, J. Alloy. Compd., 647, 1069–1074 (2015).10.1016/j.jallcom.2015.05.219 ↗
15. 15) H. Takeda, K. Yoshida, H. Okudera, K. Lebbou, T. Hoshina and T. Tsurumi, J. Ceram. Soc. Jpn., 125, 23–26 (2017).10.2109/jcersj2.16206 ↗
16. 16) R. D. Shannon, Acta Crystallogr. A, 32, 751–766 (1976).10.1107/S0567739476001551 ↗
17. 17) K. Lebbou and G. Boulon, “Fiber Crystal Growth from the Melt, Advances in Materials Research”, Ed. by T. Fukuda, P. Rudolph and S. Uda, Springer-Verlag, Berlin (2004) pp. 219–254.10.1007/978-3-662-07214-1_7 ↗
18. 18) IEEE Standard on Piezoelectricity 176-1987 (1987).
19. 19) JIS R1608: 2003. Testing methods for compressive strength of fine ceramics.
20. 20) M. Kimata, Z. Krist., 167, 103–116 (1984).10.1524/zkri.1984.167.1-2.103 ↗
21. 21) R. Bechmann, Phys. Rev., 110, 1060–1061 (1958).10.1103/PhysRev.110.1060 ↗
22. 22) J. Kushibiki and M. Arakawa, J. Acoust. Soc. Am., 108, 564–573 (2000).10.1121/1.429587 ↗
23. 23) Y. Ohashi, T. Kudo, Y. Yokota, Y. Shoji, S. Kurosawa, K. Kamada and A. Yoshikawa, Electron. Lett., 51, 1957–1958 (2015).10.1049/el.2015.2693 ↗
24. 24) L. D. Landau and E. M. Lifshitz, Mechanics (3rd ed.), Oxford: Butterworth-Heinemann (1996).
25. 25) H. Shimizu, T. Nishida, M. Nishida, H. Takeda and T. Shiosaki, Jpn. J. Appl. Phys., 44, 7059–7063 (2005).10.1143/JJAP.44.7059 ↗
26. 26) H. Shimizu, T. Nishida, H. Takeda and T. Shiosaki, J. Cryst. Growth, 311, 916–920 (2009).10.1016/j.jcrysgro.2008.09.144 ↗
27. 27) C. Shen, S. Zhang, W. Cao, J. Wang, H. Cong, H. Yu and H. Zhang, J. Appl. Phys., 117, 064106 (2015).10.1063/1.4908113 ↗
28. 28) C. Shen, S. Zhang, D. Wang, T. Xu, W. Cao, J. Wang, H. Yu and H. Zhang, CrystEngComm, 17, 1791–1799 (2015).10.1039/C4CE02015D ↗
29. 29) H. Takeda, K. Takizawa, K. Yoshida, T. Hoshina and T. Tsurumi, Ext. Abst. 35th Elctro. Div. Meet. Ceram. Soc. Jpn., 1B10, 44–45 (2015).
30. 30) E. P. Eernisse and R. W. Ward, Proc. Freq. Control Symp., 254–260 (1991).