Evaluation of calcium phosphate coating on biodegradable Mg–Al–Zn–Ca alloy formed under ordinary conditions on temperature and pressure
Source abstract
Abstract
Octacalcium phosphate (OCP) coating was formed on the surface of Mg–Al–Zn–Ca alloy (AZX612) by anodically oxidized and subsequently immersed in a supersaturated aqueous solution containing phosphate and calcium ion under ordinary temperature and pressure. The formed OCP layer consisted of both the inner layer of the fine crystallites and the outer layer of the large crystallites, and the inner layer remained on the alloy even after the ultrasonication process. In simulated body fluid, AZX612 treated with both anodic oxidization and subsequent OCP coating process showed higher corrosion resistance than those treated with only anodic oxidization.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Corrosion Behavior and Inhibition · Magnesium Alloys: Properties and Applications · Materials Engineering and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Fundamental Energy Science, Graduate School of Energy Science, Kyoto University
References (24)
Show source-provided references
1. 1) J. Vormann, Mol. Aspects Med., 24, 27–37 (2003).10.1016/S0098-2997(02)00089-4 ↗
2. 2) G. L. Song and A. Atrens, Adv. Eng. Mater., 1, 11–33 (1999).10.1002/(SICI)1527-2648(199909)1:1<11::AID-ADEM11>3.0.CO;2-N ↗
3. 3) D. Noviana, D. Paramitha, M. F. Ulum and H. Hermawan, J. Orthop. Transl., 5, 9–15 (2016).10.1016/j.jot.2015.08.003 ↗
4. 4) F. Witte, V. Kaese, H. Haferkamp, E. Switzer, A. Meyer-Lindenberg, C. J. Wirth and H. Windhagen, Biomaterials, 26, 3557–3563 (2005).10.1016/j.biomaterials.2004.09.049 ↗
5. 5) X. N. Gu, N. Li, W. R. Zhou, Y. F. Zheng, X. Zhao, Q. Z. Cai and L. Ruan, Acta Biomater., 7, 1880–1889 (2011).10.1016/j.actbio.2010.11.034 ↗
6. 6) K. Y. Chiu, M. H. Wong, F. T. Cheng and H. C. Man, Surf. Coat. Tech., 202, 590–598 (2007).10.1016/j.surfcoat.2007.06.035 ↗
7. 7) J. Hu, C. Zhang, B. Cui, K. Bai, S. Guan, L. Wang and S. Zhu, Appl. Surf. Sci., 257, 8772–8777 (2011).10.1016/j.apsusc.2011.03.148 ↗
8. 8) L. Xu and A. Yamamoto, Appl. Surf. Sci., 258, 6353–6358 (2012).10.1016/j.apsusc.2012.03.036 ↗
9. 9) B. D. Hahn, D. S. Park, J. J. Choi, J. Ryu, W. H. Yoon, J. H. Choi, H. E. Kim and S. G. Kim, Surf. Coat. Tech., 205, 3112–3118 (2011).10.1016/j.surfcoat.2010.11.029 ↗
10. 10) J. E. Gray-Munro and M. Strong, J. Biomed. Mater. Res. A, 90, 339–350 (2009).10.1002/jbm.a.32107 ↗
11. 11) H. Uoda, E. Matsuda, T. Yamamoto and H. Mori, J. Soc. Powder Technol., Jpn., 48, 600–605 (2011).10.4164/sptj.48.600 ↗
12. 12) C. Wen, S. Guan, L. Peng, C. Ren, X. Wang and Z. Hu, Appl. Surf. Sci., 255, 6433–6438 (2009).10.1016/j.apsusc.2008.09.078 ↗
13. 13) R. M. Kumar, K. K. Kuntal, S. Singh, P. Gupta, B. Bhushan, P. Gophinath and D. Lahiri, Surf. Coat. Tech., 287, 82–92 (2016).10.1016/j.surfcoat.2015.12.086 ↗
14. 14) M. Tomozawa and S. Hiromoto, Acta Mater., 59, 355–363 (2011).10.1016/j.actamat.2010.09.041 ↗
15. 15) R. Rojaee, M. Fathi and K. Raeissi, Mater. Sci. Eng., C, 33, 3817–3825 (2013).10.1016/j.msec.2013.05.014 ↗
16. 16) S. Watanabe, T. Yabutsuka and S. Takai, Key Eng. Mat., 782, 158–164 (2018).10.4028/www.scientific.net/KEM.782.158 ↗
17. 17) C. M. Serre, M. Papillard, P. Chavassieux, J. C. Voegel and G. Boivin, J. Biomed. Mater. Res., 42, 626–633 (1998).10.1002/(SICI)1097-4636(19981215)42:4<626::AID-JBM20>3.0.CO;2-S ↗
18. 18) A. Serizawa, Y. Iwase, T. Sudare, N. Saito, N. Kamiyama and T. Ishizaki, J. Jpn. Inst. Light Met., 66, 9–14 (2016).10.2464/jilm.66.9 ↗
19. 19) M. Yuasa, E. Yukutake, X. Huang, K. Suzuki, N. Saito and Y. Chino, J. Jpn. Inst. Light Met., 66, 266–272 (2016).10.2464/jilm.66.266 ↗
20. 20) A. Bigi, G. Falini, E. Foresti, A. Ripamonti, M. Gazzano and N. Roveri, J. Inorg. Biochem., 49, 69–78 (1993).10.1016/0162-0134(93)80049-F ↗
21. 21) E. Boanini, M. Gazzano, K. Rubini and A. Bigi, Cryst. Growth Des., 10, 3612–3617 (2010).10.1021/cg100494f ↗
22. 22) S. Hiromoto, J. Jpn. Inst. Light Met., 64, 203–210 (2014).10.2464/jilm.64.203 ↗
23. 23) M. Tomozawa and S. Hiromoto, Acta Mater., 59, 355–363 (2011).10.1016/j.actamat.2010.09.041 ↗
24. 24) F. Witte and A. Eliezer, in “Degradation of Implant Materials”, Ed. by N. Eliaz, Springer, New York (2012) pp. 93–109.10.1007/978-1-4614-3942-4_5 ↗