Recent development of high-entropy transitional carbides: a review
Source abstract
Abstract
The high-entropy carbides (HECs) are reviewed in terms of the crystal structure, powder synthesis, densification, and mechanisms in this article. The inter-diffusion rate of binary carbide is mainly analyzed and predicted based on lattice parameters. During the solid solution formation progress, the densification methods usually adopted were hot pressing and spark plasma sintering. It was found that the distribution of metal atoms was more uniform in high-entropy powders derived from binary carbide raw materials. HECs displayed higher hardness, elastic modulus, and oxidation resistance, and meanwhile exhibited lower thermal conductivity compared to binary carbides. HECs are expected to be used as high-speed atmospheric re-entry vehicles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
State Key Laboratory of High-Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences
Chinese Academy of Sciences University
Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences
References (51)
Show source-provided references
1. 1) L. Silvestroni, H. J. Kleebe, W. G. Fahrenholtz and J. Watts, Sci. Rep., 7, 40730 (2017).10.1038/srep40730 ↗
2. 2) W. G. Fahrenholtz and G. E. Hilmas, Scripta Mater., 129, 94–99 (2017).
3. 3) J. C. Ren, Y. L. Zhang, Y. Q. Fu, P. F. Zhang, S. Tian and L. L. Zhang, Surf. Coat. Tech., 344, 250–258 (2018).
4. 4) T. Cai, D. Liu, W. Qiu, W. Han and T. Zhao, J. Am. Ceram. Soc., 101, 20–24 (2018).
5. 5) D. S. King, G. E. Hilmas and W. G. Fahrenholtz, J. Eur. Ceram. Soc., 34, 3549–3557 (2014).
6. 6) J. W. Yeh, S. K. Chen, S. J. Lin, J. Y. Gan, T. S. Chin, T. T. Shun, C. H. Tsau and S. Y. Chang, Adv. Eng. Mater., 6, 299–303 (2004).
7. 7) T. Jin, X. Sang, R. R. Unocic, R. T. Kinch, X. Liu, J. Hu, H. Liu and S. Dai, Adv. Mater., 30, 1707512 (2018).10.1002/adma.201707512 ↗
8. 8) B. Ye, T. Wen, D. Liu and Y. Chu, Corros. Sci., 153, 327–332 (2019).
9. 9) P. H. Mayrhofer, A. Kirnbauer, P. Ertelthaler and C. M. Koller, Scripta Mater., 149, 93–97 (2018).
10. 10) G. Anand, A. P. Wynn, C. M. Handley and C. L. Freeman, Acta. Mater., 146, 119–125 (2018).
11. 11) X. Yan, L. Constantin, Y. Lu, J. F. Silvain, M. Nastasi and B. Cui, J. Am. Ceram. Soc., 101, 4486–4491 (2018).
12. 12) T. J. Harrington, J. Gild, P. Sarker, C. Toher, C. M. Rost, O. F. Dippo, C. McElfresh, K. Kaufmann, E. Marin, L. Borowski, P. E. Hopkins, J. Luo, S. Curtarolo, D. W. Brenner and K. S. Vecchio, Acta. Mater., 166, 271–280 (2019).
13. 13) P. Sarker, T. Harrington, C. Toher, C. Oses, M. Samiee, J. P. Maria, D. W. Brenner, K. S. Vecchio and S. Curtarolo, Nat. Commun., 9, 4980 (2018).10.1038/s41467-018-07160-7 ↗
14. 14) J. Dusza, P. Švec, V. Girman, R. Sedlák, E. G. Castle, T. Csanádi, A. Kovalčíková and M. J. Reece, J. Eur. Ceram. Soc., 38, 4303–4307 (2018).
15. 15) L. Feng, W. G. Fahrenholtz and G. E. Hilmas, J. Am. Ceram. Soc., 102, 7217–7224 (2019).
16. 16) E. Castle, T. Csanadi, S. Grasso, J. Dusza and M. Reece, Sci. Rep., 8, 8609 (2018).10.1038/s41598-018-26827-1 ↗
17. 17) X. X. Yu, G. B. Thompson and C. R. Weinberger, J. Eur. Ceram. Soc., 35, 95–103 (2015).
18. 18) B. Ye, T. Wen, M. C. Nguyen, L. Hao, C.-Z. Wang and Y. Chu, Acta. Mater., 170, 15–23 (2019).
19. 19) L. Feng, W. G. Fahrenholtz, G. E. Hilmas and Y. Zhou, Scripta Mater., 162, 90–93 (2019).
20. 20) X. F. Wei, J. X. Liu, F. Li, Y. Qin, Y. C. Liang and G. J. Zhang, J. Eur. Ceram. Soc., 39, 2989–2994 (2019).
21. 21) J. Zhou, J. Zhang, F. Zhang, B. Niu, L. Lei and W. Wang, Ceram. Int., 44, 22014–22018 (2018).
22. 22) B. Zhang, J. Yin, J. Chen, Y. Huang, X. Liu and Z. Huang, J. Eur. Ceram. Soc., 38, 1227–1236 (2018).
23. 23) B. Ye, T. Wen, K. Huang, C. Z. Wang and Y. Chu, J. Am. Ceram. Soc., 102, 4344–4352 (2019).
24. 24) S. Korte-Kerzel, MRS Commun., 7, 109–120 (2017).
25. 25) J. Kabel, P. Hosemann, Y. Zayachuk, D. E. J. Armstrong, T. Koyanagi, Y. Katoh and C. Deck, J. Mater. Res., 33, 424–439 (2018).
26. 26) N. Li and X.-Y. Liu, J. Mater. Sci., 53, 5562–5583 (2017).
27. 27) S. Kiani, J. M. Yang and S. Kodambaka, J. Am. Ceram. Soc., 98, 2313–2323 (2015).
28. 28) T. Csanádi, M. Bľanda, A. Duszová, N. Q. Chinh, P. Szommer and J. Dusza, J. Eur. Ceram. Soc., 34, 4099–4103 (2014).
29. 29) J. Rabier, A. Montagne, J. M. Wheeler, J. L. Demenet, J. Michler and R. Ghisleni, Phys. Status Solidi, 10, 11–15 (2013).
30. 30) Y. Zou, S. Maiti, W. Steurer and R. Spolenak, Acta. Mater., 65, 85–97 (2014).
31. 31) N. D. Leon, X. X. Yu, H. Yu, C. R. Weinberger and G. B. Thompson, Phys. Rev. Lett., 114, 165502 (2015).10.1103/PhysRevLett.114.165502 ↗
32. 32) H. Yu, M. Bahadori, G. B. Thompson and C. R. Weinberger, J. Mater. Sci., 52, 6235–6248 (2016).
33. 33) C. J. Smith, X. X. Yu, Q. Guo, C. R. Weinberger and G. B. Thompson, Acta. Mater., 145, 142–153 (2018).
34. 34) T. Csanadi, E. Castle, M. J. Reece and J. Dusza, Sci. Rep., 9, 10200 (2019).10.1038/s41598-019-46614-w ↗
35. 35) L. Wang, J. Liang and G. Fang, J. Alloy. Compd., 619, 145–150 (2010).
36. 36) A. Paul, J. G. P. Binner, B. Vaidhyanathan, A. C. J. Heaton and P. M. Brown, Adv. Appl. Ceram., 115, 158–165 (2016).
37. 37) H. F. Jackson, D. D. Jayaseelan, D. Manara, C. P. Casoni and W. E. Lee, J. Am. Cream. Soc., 94, 3561–3569 (2011).
38. 38) M. Miller-Oana, P. Neff, M. Valdez, A. Powell, M. Packard, L. S. Walker and E. L. Corral, J. Am. Ceram. Soc., 98, 1300–1307 (2015).
39. 39) C. M. Rost, Z. Rak and D. W. Brenner, J. Am. Ceram. Soc., 100, 2732–2738 (2017).
40. 40) Y. Zhang, G. M. Stocks, K. Jin, C. Lu, H. Bei, B. C. Sales, L. Wang, L. K. Béland, R. E. Stoller and G. D. Samolyuk, Nat. Commun., 6, 8736 (2015).10.1038/ncomms9736 ↗
41. 41) Z. Tong, R. He, T. Cheng, K. Zhang, D. Dai, Y. Yang and D. Fang, Ceram. Int., 44, 21076–21082 (2018).
42. 42) M. Mashhadi, M. Shambuli and S. Safi, J. Mater. Res. Technol.-JMRT, 5, 200–205 (2016).
43. 43) J. J. Yao, S. Y. Pang, C. L. Hu, J. Li, S. F. Tang and H. M. Cheng, Corros. Sci., 162, 108200 (2020).10.1016/j.corsci.2019.108200 ↗
44. 44) S. Kumar, S. Mondal, A. Kumar, A. Ranjan and N. E. Prasad, Coatings, 7, 101 (2017).10.3390/coatings7070101 ↗
45. 45) B. Zhang, J. Yin, Y. Huang, J. Chen, X. Liu and Z. Huang, J. Eur. Ceram. Soc., 38, 5610–5614 (2018).
46. 46) Y. Zeng, D. Wang, X. Xiong, G. Sen, Z. Chen, W. Sun and Y. Wang, J. Eur. Ceram. Soc., 40, 651–659 (2020).
47. 47) Y. Zeng, D. Wang, X. Xiong, X. Zhang, P. J. Withers, W. Sun, M. Smith, M. Bai and P. Xiao, Nat. Commun., 8, 15836 (2017).10.1038/ncomms15836 ↗
48. 48) H. O. Pierson, Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing and Applications (1996).
49. 49) G. Winstel, H. Tropper and K. Colani, ChemInform, 61, 1541–1546 (2014).
50. 50) C. Wang, Y. Ye, X. Guan, J. Hu, Y. Wang and J. Li, Tribol. int., 96, 77–86 (2016).
51. 51) Y. J. Wang, H. J. Li, Q. G. Fu, H. Wu, D. J. Yao and B. B. Wei, Appl. Surf. Sci., 257, 4760–4763 (2011).