Effects of NaAlO2 concentrations on structure and characterization of micro-arc oxidation coatings formed on biomedical NiTi alloy
Source abstract
Abstract
The MAO coating was prepared on biomedical alloy by micro-arc oxidation (MAO) in sodium aluminate (NaAlO2) solution using pulsed bipolar power supply. It was found that the coating consists of O, Al, Ti and Ni, and Ni concentration in the coating surface is much lower than that of Ni in the NiTi substrate. The concentration of sodium aluminate (NaAlO2) solution has an influence on the surface morphologies, surface roughness, corrosion resistance and bonding strength. XRD analysis reviewed that MAO coating formed in solution of 0.05 M sodium aluminate (NaAlO2) is amorphous, the coating was composed of crystallize γ-Al2O3 when the sodium aluminate (NaAlO2) concentration is from 0.075 M to 0.15 M. The intensity of γ-Al2O3 peaks increased with increasing the concentrations of NaAlO2. The corrosion resistance and bonding strength of the MAO coatings increased with the increasing NaAlO2 concentration. Especially, the bonding strength of MAO coating to NiTi substrate was up to 28.0 MPa when NaAlO2 concentration is up to 0.15 M.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Life and Environmental Science, Faculty of Engineering, Chiba Institute of Technology
References (19)
Show source-provided references
1. 1) V. Brailovski and F. Trochu, BioMed. Mater. Eng., 6, 291-298 (1996).10.3233/BME-1996-6406 ↗
2. 2) E. S. Mohammed, E. S. Souni and F. B. Helge, Anal. Bioanal. Chem., 381, 557-567 (2005).10.1007/s00216-004-2888-3 ↗
3. 3) S. Shabalovskaya, J. Anderegg and J. Van Humbeeck, Acta Biomater., 4, 447-467 (2005).10.1016/j.actbio.2008.01.013 ↗
4. 4) C. L. Yang, F. L. Chen and S. W. Chen, Mater. Chem. Phys., 100, 268-274 (2005).10.1016/j.matchemphys.2005.12.042 ↗
5. 5) N. Takahashi, T. Kubota, N. Kanakura and T. Shimizu, J. ceram. Soc. Japan, 113, 799-803 (2005)[in Japanese].10.2109/jcersj.113.799 ↗
6. 6) N. Takahashi, H. Funasaka and T. Shimizu, J. ceram. Soc. Japan, 113, 616-619 (2005)[in Japanese].10.2109/jcersj.113.616 ↗
7. 7) H. Habazaki, T. Onodera, K. Fushimi, H. Konno and K. Toyotake, Surf. Coat. Technol., 201, 8730-8737 (2007).10.1016/j.surfcoat.2006.05.041 ↗
8. 8) F. Liu, F. P. Wang, T. Shimizu, K. Igarashi and L. C. Zhao, Surf. Coat. Technol., 199, 220-224 (2005).10.1016/j.surfcoat.2004.10.146 ↗
9. 9) J. L. Xu, F. Liu, F. P. Wang and L. C. Zhao, Materials Letters, 62, 4112-4114 (2008).10.1016/j.matlet.2008.06.009 ↗
10. 10) J. L. Xu, F. Liu, F. P. Wang, D. Z. Yu and L. C. Zhao, J. Alloys Compd., 472, 276-280 (2009).10.1016/j.jallcom.2008.04.064 ↗
11. 11) J. L. Xu, F. Liu, F. P. Wang, D. Z. Yu and L. C. Zhao, Curr. Appl. Phys., 9, 663-666 (2009).10.1016/j.cap.2008.06.003 ↗
12. 12) J. L. Xu, F. Liu, F. P. Wang, D. Z. Yu and L. C. Zhao, Appl. Surf. Sci., 254, 6642-6647 (2009).10.1016/j.apsusc.2008.04.068 ↗
13. 13) A. L. Yerokhin, X. Nie, A. Leyland, A. Matthews and S. J. Dowey, Surf. Coat. Techol., 122, 73-93 (1999).10.1016/S0257-8972(99)00441-7 ↗
14. 14) J. Liang, B. G. Guo, J. Tian, H. W. Liu, J. F. Zhou and T. Xu, Surf. Coat. Technol., 199, 121-126 (2005).10.1016/j.surfcoat.2005.03.020 ↗
15. 15) E. S. Mohammed, E. S. Souni and F. B. Helge, Anal. Bioanal. Chem., 381, 557-567 (2005).10.1007/s00216-004-2888-3 ↗
16. 16) M. O. Oji, J. V. Wood and S. Downes, J. Mater. Sci.: Mater. Med., 10, 869-872 (1999).10.1023/A:1008933318756 ↗
17. 17) R. J. Moolenaar, J. C. Evans and L. D. McKeever, J. Phys. Chem., 74, 3629-3636 (1970).10.1021/j100714a014 ↗
18. 18) A. Yerokhin, A. Leyland and A. Matthews, Appl. Surf. Sci., 200, 172-184 (2002).10.1016/S0169-4332(02)00848-6 ↗
19. 19) L. O. Snizhko, A. L. Yerokhin, A. Pilkington, N. L. Gurevina, D. O. Misnyankin, A. Leyland and A. Mattews, Electrochim. Acta., 49, 2085-2095 (2004).10.1016/j.electacta.2003.11.027 ↗