Low-temperature sintering of Li1.3Al0.3Ti1.7(PO4)3 electrolytes enabled by cobalt surface modification followed by two-step sintering
Source abstract
Abstract
The surface of NASICON-type solid electrolyte Li1.3Al0.3Ti1.7(PO4)3 (LATP) particles was modified with Co ions as a sintering aid by a wet chemical method. The effects of the inert and atmospheric sintering conditions on the sinterability of the Co element-modified LATP (Co-LATP) were investigated. With Co addition at x = 0.5 wt %, the densities of Co-LATP sintered at 800 °C in air and argon by the conventional sintering (CS) method were 81 and 66 %, respectively. In the case of the CS method in an air atmosphere, the reaction phases such as LiCoPO4 (LCP) and lithium phosphate were formed and acted as sintering aids. For the case of the conventional method in Ar, LCP was not formed, but reduction of the Ti of LATP and reduced TiO2−x were formed. These results suggested that the reaction mechanism of Co-LATP differs under each atmosphere in the conventional method. In conclusion, we succeeded in densifying Co-LATP by a two-step sintering (TSS); the first-step is sintering at 400 °C in air and the second-step is sintering at 800 °C in Ar. Co-LATP (x = 0.0–2.0 wt %) sintered under the optimized TSS condition, Co-LATP at x = 0.5 wt % showed the highest electrical conductivity of 1.3 × 10−4 S/cm at room temperature.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
National Institute for Material Science
References (75)
Show source-provided references
1. 1) K. Takada, Acta Mater., 61, 759–770 (2013).10.1016/j.actamat.2012.10.034 ↗
2. 2) Y. Meesala, A. Jena, H. Chang and R. S. Liu, ACS Energy Lett., 2, 2734–2751 (2017).10.1021/acsenergylett.7b00849 ↗
3. 3) S. Sen, E. Trevisanello, E. Niemöller, B. X. Shi, F. J. Simon and F. H. Richter, J. Mater. Chem. A, 9, 18701–18732 (2021).10.1039/D1TA02796D ↗
4. 4) R. Chen, W. Qu, X. Guo, L. Li and F. Wu, Mater. Horizons, 3, 487–516 (2016).10.1039/C6MH00218H ↗
5. 5) L. Liang, X. Sun, J. Zhang, J. Sun, L. Hou, Y. Liu and C. Yuan, Mater. Horizons, 6, 871–910 (2019).10.1039/C8MH01593G ↗
6. 6) J. B. Goodenough and Y. Kim, Chem. Mater., 22, 587–603 (2010).10.1021/cm901452z ↗
7. 7) Y. Zhu, J. C. Gonzalez-Rosillo, M. Balaish, Z. D. Hood, K. J. Kim and J. L. M. Rupp, Nat. Rev. Mater., 6, 313–331 (2021).10.1038/s41578-020-00261-0 ↗
8. 8) X. Chen, Z. Guan, F. Chu, Z. Xue, F. Wu and Y. Yu, InfoMat, 4, 1–20 (2022).10.1002/inf2.12248 ↗
9. 9) R. Chen, Q. Li, X. Yu, L. Chen and H. Li, Chem. Rev., 120, 6820–6877 (2020).10.1021/acs.chemrev.9b00268 ↗
10. 10) Y. Zhu, X. He and Y. Mo, ACS Appl. Mater. Inter., 7, 23685–23693 (2015).10.1021/acsami.5b07517 ↗
11. 11) Y. Wu, S. Wang, H. Li, L. Chen and F. Wu, InfoMat, 3, 827–853 (2021).10.1002/inf2.12224 ↗
12. 12) K. B. Hatzell and Y. Zheng, MRS Energy Sustain., 8, 33–39 (2021).10.1557/s43581-021-00004-w ↗
13. 13) X. Chen, J. Xie, X. Zhao and T. Zhu, Adv. Energy Sustain. Res., 2, 2000101 (2021).10.1002/aesr.202000101 ↗
14. 14) M. V. Reddy, C. M. Julien, A. Mauger and K. Zaghib, Nanomaterials-Basel, 10, 1–80 (2020).10.3390/nano10081606 ↗
15. 15) N. Boaretto, I. Garbayo, S. Valiyaveettil-SobhanRaj, A. Quintela, C. Li, M. Casas-Cabanas and F. Aguesse, J. Power Sources, 502, 229919 (2021).10.1016/j.jpowsour.2021.229919 ↗
16. 16) A. Banerjee, X. Wang, C. Fang, E. A. Wu and Y. S. Meng, Chem. Rev., 120, 6878–6933 (2020).10.1021/acs.chemrev.0c00101 ↗
17. 17) K. Nie, Y. Hong, J. Qiu, Q. Li, X. Yu, H. Li and L. Chen, Front. Chem., 6, 1–19 (2018).10.3389/fchem.2018.00616 ↗
18. 18) C. Y. Yu, J. Choi, V. Anandan and J. H. Kim, J. Phys. Chem. C, 124, 14963–14971 (2020).
19. 19) L. Miara, A. Windmüller, C. L. Tsai, W. D. Richards, Q. Ma, S. Uhlenbruck, O. Guillon and G. Ceder, ACS Appl. Mater. Inter., 8, 26842–26850 (2016).10.1021/acsami.6b09059 ↗
20. 20) K. J. Kim and J. L. M. Rupp, Energ. Environ. Sci., 13, 4930–4945 (2020).10.1039/D0EE02062A ↗
21. 21) K. Yang, L. Chen, J. Ma, Y. He and F. Kang, InfoMat, 3, 1195–1217 (2021).10.1002/inf2.12222 ↗
22. 22) N. Hamao, Y. Yamaguchi and K. Hamamoto, Materials, 14, 4737 (2021).10.3390/ma14164737 ↗
23. 23) Y. Liu, Q. Sun, D. Wang, K. Adair, J. Liang and X. Sun, J. Power Sources, 393, 193–203 (2018).10.1016/j.jpowsour.2018.05.015 ↗
24. 24) A. Paolella, W. Zhu, G. Bertoni, A. Perea, H. Demers, S. Savoie, G. Girard, N. Delaporte, A. Guerfi, M. Rumpel, H. Lorrmann, G. P. Demopoulos and K. Zaghib, Adv. Mater. Interfaces, 7, 2000164 (2020).10.1002/admi.202000164 ↗
25. 25) H. Zhu, A. Prasad, S. Doja, L. Bichler and J. Liu, Nanomaterials-Basel, 9, 6–8 (2019).
26. 26) Y. Liu, J. Liu, Q. Sun, D. Wang, K. R. Adair, J. Liang, C. Zhang, L. Zhang, S. Lu, H. Huang, X. Song and X. Sun, ACS Appl. Mater. Inter., 11, 27890–27896 (2019).10.1021/acsami.9b08132 ↗
27. 27) K. Waetzig, A. Rost, C. Heubner, M. Coeler, K. Nikolowski, M. Wolter and J. Schilm, J. Alloy. Compd., 818, 153237 (2020).10.1016/j.jallcom.2019.153237 ↗
28. 28) R. DeWees and H. Wang, ChemSusChem, 12, 3713–3725 (2019).10.1002/cssc.201900725 ↗
29. 29) Y. Ren, H. Deng, H. Zhao, Z. Zhou and Z. Wei, Ionics, 7, 6049–6056 (2020).10.1007/s11581-020-03781-5 ↗
30. 30) L. Xingang, T. Jiang, J. Fu, R. Yuan, H. Wen and C. Zhang, ACS Appl. Mater. Inter., 9, 11696–11703 (2017).
31. 31) K. Kwatek, W. Ślubowska, C. Ruiz, I. Sobrados, J. Sanz, J. E. Garbarczyk and J. L. Nowiński, J. Alloy. Compd., 838, 1–13 (2020).
32. 32) H. Aono, E. Sugimoto, Y. Sadaoka, N. Imanaka and G. Adachi, Chem. Lett., 19, 331–334 (1990).10.1246/cl.1990.331 ↗
33. 33) S. Chen, X. Hu, W. Bao, Z. Wang, Q. Yang, L. Nie, X. Zhang, J. Zhang, Y. Jiang, Y. Han, C. Wan, J. Xie, Y. Yu and W. Liu, Cell Reports Phys. Sci., 2, 0–16 (2021).10.1016/j.xcrp.2021.100569 ↗
34. 34) K. Waetzig, C. Heubner and M. Kusnezoff, Crystals, 10, 408 (2020).10.3390/cryst10050408 ↗
35. 35) H. Aono, E. Sugimoto, Y. Sadaoka, N. Imanaka and G. Adachi, Solid State Ionics, 47, 257–264 (1991).10.1016/0167-2738(91)90247-9 ↗
36. 36) Z. Zou, Y. Li, Z. Lu, D. Wang, Y. Cui, B. Guo, Y. Li, X. Liang, J. Feng, H. Li, C. W. Nan, M. Armand, L. Chen, K. Xu and S. Shi, Chem. Rev., 120, 4169–4221 (2020).10.1021/acs.chemrev.9b00760 ↗
37. 37) B. Davaasuren and F. Tietz, Solid State Ionics, 338, 144–152 (2019).10.1016/j.ssi.2019.05.016 ↗
38. 38) H. Al-Salih, M. S. E. Houache, E. A. Baranova and Y. Abu-Lebdeh, Adv. Energy Sustain. Res., 3, 2200032 (2022).10.1002/aesr.202200032 ↗
39. 39) Z. Zhang, Y. Shao, B. Lotsch, Y. S. Hu, H. Li, J. Janek, L. F. Nazar, C. W. Nan, J. Maier, M. Armand and L. Chen, Energ. Environ. Sci., 11, 1945–1976 (2018).10.1039/C8EE01053F ↗
40. 40) E. Umeshbabu, B. Zheng and Y. Yang, “Recent Progress in All-Solid-State Lithium–Sulfur Batteries Using High Li-Ion Conductive Solid Electrolytes”, Springer, Singapore (2019).10.1007/s41918-019-00029-3 ↗
41. 41) M. Balaish, J. C. Gonzalez-Rosillo, K. J. Kim, Y. Zhu, Z. D. Hood and J. L. M. Rupp, Nat. Energy, 6, 227–239 (2021).10.1038/s41560-020-00759-5 ↗
42. 42) J. Y. Kim, S. Jung, S. H. Kang, M. J. Lee, D. Jin, D. O. Shin, Y. G. Lee and Y. M. Lee, J. Power Sources, 518, 230736 (2022).10.1016/j.jpowsour.2021.230736 ↗
43. 43) J. Schnell, F. Tietz, C. Singer, A. Hofer, N. Billot and G. Reinhart, Energ. Environ. Sci., 12, 1818–1833 (2019).10.1039/C8EE02692K ↗
44. 44) Y.-H. Chen, C.-W. Wang, G. Liu, X.-Y. Song, V. S. Battaglia and A. M. Sastry, J. Electrochem. Soc., 154, A978 (2007).10.1149/1.2767839 ↗
45. 45) Q. Zhang, Z. Yu, P. Du and C. Su, Recent Pat. Nanotech., 4, 100–110 (2010).10.2174/187221010791208803 ↗
46. 46) C. Gong, Z. Xue, S. Wen, Y. Ye and X. Xie, J. Power Sources, 318, 93–112 (2016).10.1016/j.jpowsour.2016.04.008 ↗
47. 47) A. V. Krestinin, N. N. Dremova, E. I. Knerel’Man, L. N. Blinova, V. G. Zhigalina and N. A. Kiselev, Nanotechnol. Russ., 10, 537–548 (2015).10.1134/S1995078015040096 ↗
48. 48) A. Mahajan, A. Kingon, Á. Kukovecz, Z. Konya and P. M. Vilarinho, Mater. Lett., 90, 165–168 (2013).10.1016/j.matlet.2012.08.120 ↗
49. 49) J. A. Dias, S. H. Santagneli and Y. Messaddeq, J. Phys. Chem. C, 124, 26518–26539 (2020).10.1021/acs.jpcc.0c07385 ↗
50. 50) R. Dewees and H. Wang, ChemSusChem, 12, 3713–3725 (2019).10.1002/cssc.201900725 ↗
51. 51) X. Lu, R. Wang, F. Zhang and J. Li, Solid State Ionics, 354, 115417 (2020).10.1016/j.ssi.2020.115417 ↗
52. 52) H. Aono, E. Sugimoto, N. Imanaka and G. Adachi, J. Electrochem. Soc., 137, 1023–1027 (1990).10.1149/1.2086597 ↗
53. 53) M. Rumpel, F. Nagler, L. Appold, W. Stracke, A. Flegler, O. Clemens and G. Sextl, Mater. Adv., 3, 4015–4025 (2022).10.1039/D2MA00158F ↗
54. 54) M. Gellert, E. Dashjav, D. Grüner, Q. Ma and F. Tietz, Ionics, 24, 1001–1006 (2018).10.1007/s11581-017-2276-6 ↗
55. 55) J. Xie, N. Imanishi, T. Zhang, A. Hirano, Y. Takeda and O. Yamamoto, J. Power Sources, 192, 689–692 (2009).10.1016/j.jpowsour.2009.03.001 ↗
56. 56) P. Hofmann, F. Walther, M. Rohnke, J. Sann, W. G. Zeier and J. Janek, Solid State Ionics, 342, 1–10 (2019).10.1016/j.ssi.2019.115054 ↗
57. 57) X. Wei, J. Rechtin and E. A. Olevsky, Metals-Basel, 7, 1–9 (2017).10.3390/met7090372 ↗
58. 58) R. Harada, K. Aso, A. Hayashi and M. Tatsumisago, Electrochemistry, 83, 898–901 (2015).10.5796/electrochemistry.83.898 ↗
59. 59) K. Nagata and T. Nanno, J. Power Sources, 174, 832–837 (2007).10.1016/j.jpowsour.2007.06.227 ↗
60. 60) K. Amine, H. Yasuda and M. Yamachi, Electrochem. Solid St., 3, 178–179 (2000).
61. 61) C. M. Julien and A. Mauger, Review of 5-V electrodes for Li-ion batteries: Status and trends (2013).10.1007/s11581-013-0913-2 ↗
62. 62) N. Tolganbek, Y. Yerkinbekova, S. Kalybekkyzy, Z. Bakenov and A. Mentbayeva, J. Alloy. Compd., 882, 160774 (2021).10.1016/j.jallcom.2021.160774 ↗
63. 63) F. Wu, J. Maier and Y. Yu, Chem. Soc. Rev., 49, 1569–1614 (2020).10.1039/C7CS00863E ↗
64. 64) A. K. Padhi, K. S. Nanjundaswamy and J. B. Goodenough, J. Electrochem. Soc., 144, 1188–1194 (1997).10.1149/1.1837571 ↗
65. 65) N. Nitta, F. Wu, J. T. Lee and G. Yushin, Mater. Today, 18, 252–264 (2015).10.1016/j.mattod.2014.10.040 ↗
66. 66) S. Okada, S. Sawa, M. Egashira, J. I. Yamaki, M. Tabuchi, H. Kageyama, T. Konishi and A. Yoshino, J. Power Sources, 97–98, 430–432 (2001).10.1016/S0378-7753(01)00631-0 ↗
67. 67) K. Ishii, T. Uchikoshi, S. Miyoshi, M. Ode, T. Ohno and K. Takada, Mater. Lett., 324, 132736 (2022).10.1016/j.matlet.2022.132736 ↗
68. 68) K. Ishii, M. Ode, K. Mitsuishi, S. Miyoshi, T. Ohno, K. Takada and T. Uchikoshi, J. Power Sources, 546, 1–8 (2022).10.1016/j.jpowsour.2022.231954 ↗
69. 69) S. Miyoshi, Y. Nishihara and K. Takada, ACS Appl. Energ. Mater., 5, 7515–7522 (2022).10.1021/acsaem.2c00996 ↗
70. 70) C. Peng, Y. Kamiike, Y. Liang, K. Kuroda and M. Okido, ACS Sustain. Chem. Eng., 7, 10751–10762 (2019).10.1021/acssuschemeng.9b01435 ↗
71. 71) C. C. Yang, J. R. Jiang, C. Karuppiah, J. H. Jang, Z. H. Wu, R. Jose and S. J. Lue, J. Alloy. Compd., 765, 800–811 (2018).10.1016/j.jallcom.2018.06.289 ↗
72. 72) J. Ludwig and T. Nilges, J. Power Sources, 382, 101–115 (2018).10.1016/j.jpowsour.2018.02.038 ↗
73. 73) M. Hunault, J. L. Robert, M. Newville, L. Galoisy and G. Calas, Spectrochim. Acta A, 117, 406–412 (2014).10.1016/j.saa.2013.08.021 ↗
74. 74) J. Ludwig, C. Marino, D. Haering, C. Stinner, H. A. Gasteiger and T. Nilges, J. Power Sources, 342, 214–223 (2017).10.1016/j.jpowsour.2016.12.059 ↗
75. 75) H. Tagawa, Bull. Inst. Environ. Sci. Technol. Yokohama Natl. Univ., 14, 41–57 (1987).