Solid-state-reactive fabrication of Cr,Nd:YAG transparent ceramics: the influence of raw material
Source abstract
Abstract
Solid-state reactive sintering a stoichiometric mixture of commercial γ-Al2O3, Y2O3, Nd2O3 and Cr2O3 powders was conducted at 1800°C with tetraethoxysilane (TEOS) as sintering aid and CaO as charge compensator. The cubic garnet structure of YAG (Y3Al5O12) as well as orthorhombic structure of YAP (YAlO3) formed in the sample due to mass loss of γ-Al2O3 during sintering. The sample obtained was fully dense but not transparent and the width of grain boundary phase was about 300 nm contained a significant amount of Si and Nd, compared with the inner grains. The doping concentration of Nd and Si in YAlO3 phase is much larger than that in Y3Al5O12 phase. However, when a little more γ-Al2O3 than stoichiometric composite was added, transparent Cr,Nd:YAG ceramic could be obtained. The optical transmittance of the sample sintered at 1800°C for 10h is 68.5% at 1064nm and the average grain size is about 10 μm.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Luminescence Properties of Advanced Materials · Solid State Laser Technologies · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Shanghai Institute of Ceramics, Chinese Academy of Sciences
References (17)
Show source-provided references
1. 10.1111/j.1151-2916.1995.tb08389.x10.1111/j.1151-2916.1995.tb08389.x ↗
2. 10.1111/j.1151-2916.1995.tb08433.x10.1111/j.1151-2916.1995.tb08433.x ↗
3. 10.1023/A:100454862080210.1023/A:1004548620802 ↗
4. 10.1063/1.128903910.1063/1.1289039 ↗
5. 5) J. Lu, M. Prahu, J. Song, C. Li, J. Xu, K. Ueda, A. A. Kaminskii, H. Yagi and T. Yanagitani, Appl. Phys., B 71, 469-473 (2000).10.1007/s003400000394 ↗
6. 10.1063/1.133109110.1063/1.1331091 ↗
7. 7) J. Lu, J. Song, M. Prabhu, J. Xu, K. Ueda, H. Yagi, T. Yanagitani and A. Kudryashov, Jpn. J. Appl. Phys. Lett., 39, L1048-L1050 (2000).10.1143/JJAP.39.L1048 ↗
8. 8) J. Lu, M. Prahu, J. Xu, K. Ueda, H. Yagi, T. Yanagitani and A. A. Kaminskii, Jpn. J. Appl. Phys. Lett., 40, L552-L554 (2001).10.1143/JJAP.40.L552 ↗
9. 10.1111/j.1551-2916.2006.01043.x10.1111/j.1551-2916.2006.01043.x ↗
10. 10) A. Ikesue, K. Kamata and K. Yoshida, J. Am. Ceram. Soc., 78, 2545-2547 (1996).10.1111/j.1151-2916.1995.tb08699.x ↗
11. 11) H. Yagi, T. Yanagitani, H. Yoshida, M. Nakatsuka and K. Ueda, Jpn. J. Appl. Phys., 45, 133-135 (2006).10.1143/JJAP.45.133 ↗
12. 10.1016/j.jnoncrysol.2006.02.06210.1016/j.jnoncrysol.2006.02.062 ↗
13. 13) J. Li, Y. S. Wu, Y. B. Pan, Y. Zhu and J. K. Guo, Chin. J. Lumin., 28, 219-224 (2007).10.1007/s11401-005-0413-4 ↗
14. 14) J. Li, Y. S. Wu, Y. B. Pan, H. M. Kou, Y. Shi and J. K. Guo, Ceram. Int., 2007, doi:10.1016/j.ceramint.2007.07.019.10.1016/j.ceramint.2007.07.019 ↗
15. 15) J. Li, Y. S. Wu, Y. B. Pan, L. Q. An, J. Zhang, S. W. Wang and J. K. Guo, J. Inorg. Mater., 22, 798-802 (2007).
16. 16) J. Li, Y. S. Wu, Y. B. Pan, W. B. Liu, L. Q. An, S. W. Wang and J. K. Guo, J. Chin. Ceram. Soc., 35, 1600-1604 (2007).
17. 10.1111/j.1151-2916.1994.tb04516.x10.1111/j.1151-2916.1994.tb04516.x ↗