journal article·2011-12Open access

Estimation of fatigue damage in holed composite laminates using an embedded FBG sensor

S. Yashiro, T. Okabe

Abstract

This study investigated damage identification in holed CFRP laminates under cyclic loading by using an embedded fiber Bragg grating (FBG) sensor. Ply cracks and delamination extended near the hole with an increasing number of cycles, and the reflection spectrum from the FBG sensor was distorted. Moreover, debonding growth of the FBG sensor was observed. This study then estimated laminate damage pattern from reflection spectra and investigated the influence of the sensor debonding on damage identification. The debonding length was estimated from the spectrum simulated with a given debonding length and was successfully identified only when an appropriate damage pattern was assumed. Moreover, greater debonding induced invalid damage-pattern estimates, even if the debonding length was given in the estimation. The damage identification for simulations and for experiments required half of the intact gage section. These estimates indicated that information on the damage pattern disappeared from the spectrum shape because of debonding.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Fiber Optic Sensors · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Fatigue damage mechanics of composite materials. I: Experimental measurement of damage and post-fatigue properties10.1016/0266-3538(92)90109-G ↗
2. Experimental verification of response of embedded optical fiber Bragg grating sensors in non-homogeneous strain fields10.1016/S0143-8166(00)00033-6 ↗
3. Embedded optical fiber Bragg grating sensor in a nonuniform strain field: measurements and simulations10.1007/BF02323100 ↗
4. Embedded fiber Bragg grating sensor for internal strain measurements in polymeric materials10.1016/j.optlaseng.2004.04.009 ↗
5. Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors10.1088/0964-1726/9/6/313 ↗
6. Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors10.1016/S1359-835X(02)00036-2 ↗
7. In-situ impact-induced damage assessment of woven composite laminates through a fibre Bragg grating sensor network10.1017/S0001924000003031 ↗
8. A new approach to predicting multiple damage states in composite laminates with embedded FBG sensors10.1016/j.compscitech.2004.09.022 ↗
9. Monitoring damage in holed CFRP laminates with chirped FBG sensors10.1016/j.ijsolstr.2006.05.004 ↗
10. Delamination detection and characterisation of bridging tractions using long FBG optical sensors10.1016/j.compositesa.2007.07.009 ↗
11. Development of smart composite structures with small-diameter fiber Bragg grating sensors for damage detection: quantitative evaluation of delamination length in CFRP laminates using Lamb wave sensing10.1016/j.compscitech.2005.07.014 ↗
12. Ultrasound and damage detection in CFRP using fiber Bragg grating sensors10.1016/j.compscitech.2005.07.043 ↗
13. Okabe T, Yashiro S. Damage detection in holed composite laminates using an embedded FBG sensor. Compos Part A; submitted for publication.
14. Monitoring of hygrothermal ageing effects in an epoxy resin using FBG sensor: a methodological study10.1016/j.compscitech.2008.11.028 ↗
15. Damage identification in a holed CFRP laminate using a chirped fiber Bragg grating sensor10.1016/j.compscitech.2006.08.004 ↗
16. Impact-induced delamination of composites: a 2D simulation10.1016/S1359-8368(98)00013-4 ↗
17. Bragg intragrating structural sensing10.1364/AO.34.005003 ↗
18. The tunneling algorithm for the global minimization of functions10.1137/0906002 ↗