journal article·2020-06

Preparation, characterisation and industrial evaluation of foamed fireclay

Samir B. Hanna, Noha A. Ajiba

Publisher page

Abstract

In this study, the direct foaming method was used to prepare groups of porous fireclay refractories containing 36–42 wt% Al2O3 from Aswan ball clay and Kalabsha kaolin (local raw material). A mixture of calcium oxide or carbide and aluminium powder was used as a foaming agent. Sodium silicate and a surfactant were employed to assist the foaming process. The physico-mechanical and mineralogical properties in addition to the microstructure characteristics of the fired samples were investigated using standard methods in addition to the XRD and SEM techniques. The effects of some preparation variables such as foaming agent, firing temperature and clay type on their properties and microstructure were also studied. The results indicated that, when CaC2 was used instead of CaO as a foaming agent, an enlargement in pore sizes accompanied with a decrease in the bulk density of samples takes place, particularly when the water content increases. On increasing the firing temperature from 1350 to 1450 °C, the pore sizes of the samples decrease, and hence, their bulk density increases. The replacement of ≥ 25 wt% of Aswan ball clay with Kalabsha kaolin improves its chemical composition and physical properties to be more suitable for the foaming process. The prepared samples are classified based on their bulk density and application temperature in groups 24–26 and class L according to ASTM and UN specifications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Foaming and Composites · Pickering emulsions and particle stabilization · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Soltan, A.M., et al.: Degradation of aluminosilicate refractories: an integrated approach. J. Eur. Ceram. Soc. 35(16), 4573–4592 (2015)10.1016/j.jeurceramsoc.2015.08.018 ↗
2. Eppler, R.A., Eppler, D.R.: Glazes and Glass Coatings. American Ceramic Society, Westerville, OH (2000)
3. Poirier, J., et al.: Analysis and interpretation of refractory microstructures in studies of corrosion mechanisms by liquid oxides. J. Eur. Ceram. Soc. 28(8), 1557–1568 (2008)10.1016/j.jeurceramsoc.2007.10.012 ↗
4. Stjernberg, J., et al.: Laboratory scale study of the degradation of mullite/corundum refractories by reaction with alkali-doped deposit materials. Ceram. Int. 39(1), 791–800 (2013)10.1016/j.ceramint.2012.06.094 ↗
5. Novak, AE: Refractory engineering: materials, design & construction, 355 (2005)
6. Garbers-Craig, A.M.: Presidential address: how cool are refractory materials? J. South. Afr. Inst. Min. Metall. 108, 491–506 (2008)
7. Carlucci, C., et al.: Properties of aluminosilicate refractories with synthesized boron-modified TiO2 nanocrystals. Nanomater. Nanotechnol. 5, 8 (2015)10.5772/60204 ↗
8. Balkevich, V.L., et al.: Contact interaction of bacor and silica refractories. Refractories. 25(1–2), 118–121 (1984)10.1007/BF01387404 ↗
9. Arahori, T., Suzuki, T.: Transformation of tridymite to cristobalite below 1470 C in silica refractories. J. Mater. Sci. 22(6), 2248–2252 (1987)10.1007/BF01132967 ↗
10. Sadik, C., El Amrani, I.-E., Albizane, A.: Recent advances in silica-alumina refractory: a review. J. Asian Ceram. Soc. 2(2), 83–96 (2014)10.1016/j.jascer.2014.03.001 ↗
11. Fu, L., Gu, H., Huang, A., Ni, H.: Correlations among processing parameters and porosity of a lightweight alumina. Ceram. Int. 44(12), 14076–14081 (2018)10.1016/j.ceramint.2018.05.005 ↗
12. Fu, L., Huang, A., Gu, H., Ni, H.: Fabrication of lightweight alumina containing fine closed pores by controlling the relationship between phase stress and superplasticity: experimental and mathematical studies. Ceram. Int. 44(16), 20034–20042 (2018)10.1016/j.ceramint.2018.07.277 ↗
13. Fu, L., Huang, A., Gu, H., Ni, H.: Properties and microstructures of lightweight alumina containing different types of nano-alumina. Ceram. Int. 44(15), 17885–17894 (2018)10.1016/j.ceramint.2018.06.261 ↗
14. Andrews, A., Adam, J., Gawu, S.K.Y.: Development of fireclay aluminosilicate refractory from lithomargic clay deposits. Ceram. Int. 39(1), 779–783 (2013)10.1016/j.ceramint.2012.06.091 ↗
15. Doza, DK, and Liu, JY: Lightweight dry refractory. U.S. Patent No. 6,458,732. 1 Oct. 2002
16. Ezzeldeen, S., Ibrahim, I.A.: Production of insulating refractory bricks using rice straw. Silic. Ind. 1-2, 21–25 (2006)
17. Colombo, P: Ceramic Foams: Fabrication, Properties and Applications. Key Engineering Materials. Vol. 206. Trans Tech Publications, 200210.4028/www.scientific.net/KEM.206-213.1913 ↗
18. Sepulveda, P.: Gelcasting foams for porous ceramics. Am. Ceram. Soc. Bull. 76(10), 61–65 (1997)
19. Pradhan, M., Bhargava, P.: Defect and microstructural evolution during drying of soapnut-based alumina foams. J. Eur. Ceram. Soc. 28(16), 3049–3057 (2008)10.1016/j.jeurceramsoc.2008.05.025 ↗
20. He, X., Zhou, X., Su, B.: 3D interconnective porous alumina ceramics via direct protein foaming. Mater. Lett. 63(11), 830–832 (2009)10.1016/j.matlet.2008.12.021 ↗
21. Banhart, J.: Manufacture, characterisation and application of cellular metals and metal foams. Prog. Mater. Sci. 46(6), 559–632 (2001)10.1016/S0079-6425(00)00002-5 ↗
22. Juettner, T., et al.: Structure of kaoline–alumina based foam ceramics for high temperature applications. J. Eur. Ceram. Soc. 27(2–3), 1435–1441 (2007)10.1016/j.jeurceramsoc.2006.04.029 ↗
23. Hanna, SB, Ajiba, NA and Ibrahim, SK: Some factors affecting the properties and microstructure of foamed fireclay refractories. Refract. Eng., 22–27 (2014)
24. Razak, H.A., Mahde, A.K., Yahya, A.H.: Chemical cellulation technique for lightweight clay bricks. Br. Ceram. Trans. 101(4), 172–176 (2002)10.1179/096797802225003352 ↗
25. Clements, J.F.: Characteristics of refractory insulating materials. Brit Ceram Soc Trans. 65(8), 479–496 (1966)
26. Oliveira, M., Ferreira, J.M.F.: Structural and mechanical characterisation of MgO-, CaO- and BaO-doped aluminosilicate ceramics. Mater. Sci. Eng. A. 344(1–2), 35–44 (2003)10.1016/S0921-5093(02)00401-X ↗
27. Moller, Feuerungs Lengo GmbH, Lengo, Germany “Refractory material”, Company brochure (1997)
28. Hanna, SB; Ahmed, MA; Kennauy, S; Naguib, WM; et al.: Production of thermal insulations bricks (bulk density = 0.6 gm/cm3) from local raw materials, Academy of Research and Technology, Final Report, July (2006)
29. Mansour, TSA:The study of constitution and properties of high alumina insulating refractories made of some local and imported raw materials. M. Sc. thesis, Cairo, Univ., Faculty of Science, Cairo University (2009)