Upcycling municipal solid waste incineration fly ash with rice husk ash-derived activators for geopolymer composites
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (99)
Show source-provided references
1. Singh, N., et al.: Reviewing the properties of recycled concrete aggregates and iron slag in concrete. J. Building Eng. 60, 105150 (2022)10.1016/j.jobe.2022.105150 ↗
2. Singh, G.B., Subramaniam, K.V.: Influence of processing temperature on the reaction product and strength gain in alkali-activated fly Ash. Cem. Concr. Compos. 95, 10–18 (2019)10.1016/j.cemconcomp.2018.10.010 ↗
3. Liu, M.Y.J., et al.: Microstructural investigations of palm oil fuel Ash and fly Ash based binders in lightweight aggregate foamed geopolymer concrete. Constr. Build. Mater. 120, 112–122 (2016)10.1016/j.conbuildmat.2016.05.076 ↗
4. Thakur, M., Bawa, S.: Self-compacting geopolymer concrete: A review. Mater. Today: Proc. 59, 1683–1693 (2022)
5. Farooq, M., Krishna, A., Banthia, N.: Highly ductile fiber reinforced geopolymers under tensile impact. Cem. Concr. Compos. 126, 104374 (2022)10.1016/j.cemconcomp.2021.104374 ↗
6. Kajaste, R., Hurme, M.: Cement industry greenhouse gas emissions–management options and abatement cost. J. Clean. Prod. 112, 4041–4052 (2016)10.1016/j.jclepro.2015.07.055 ↗
7. Sharma, A., et al.: Potential of geopolymer concrete as substitution for conventional concrete: A review. Mater. Today: Proc. 57, 1539–1545 (2022)
8. Malhotra, V.: Introduction: Sustainable development and concrete technology. Concr. Int., 24(7). (2002)
9. Raza, A., et al.: Synergy of tests and finite element analysis for predicting axial structural behavior of CFRP-confined activated red mud-based geopolymer composites. Mater. Struct. 58(4), 150 (2025)10.1617/s11527-025-02676-z ↗
10. Elhag, A.B., et al.: Synergistic effects of hybrid fibers and elevated temperature on strength and phase assemblage of granite Waste-Based geopolymer composites. Mater. Lett. 393, 138583 (2025)10.1016/j.matlet.2025.138583 ↗
11. Alashker, Y., et al.: Microstructural and thermal characterization of polyethylene and basalt fiber-reinforced natural zeolite-based engineered geopolymer composites. Mater. Lett. 383, 137984 (2025)10.1016/j.matlet.2025.137984 ↗
12. Alomayri, T., et al.: Mechanical, microstructural, and thermal characterization of geopolymer composites with nano-alumina particles and micro steel fibers. Struct. Concrete. 26(2), 1540–1559 (2025)10.1002/suco.202400477 ↗
13. Ghazouani, N., et al.: Mechanical strength and mineralogical properties of fiber-reinforced geopolymer composites with multi-walled carbon nanotubes. Mater. Lett. 382, 137843 (2025)10.1016/j.matlet.2024.137843 ↗
14. Raza, A., et al.: Enhanced performance of fiber-reinforced engineered geopolymer composites incorporating blast furnace slag and calcined bauxite residue. J. Sustainable Cement-Based Mater. 14(5), 887–905 (2025)10.1080/21650373.2025.2471835 ↗
15. Ghazouani, N., et al.: Compressive toughening and microstructural assessment of glass fiber reinforced phosphate-activated kaolinitic geopolymers. Mater. Lett., : p. 138903. (2025)10.1016/j.matlet.2025.138903 ↗
16. Al-Naghi, A.A.A., et al.: Combined effects of elevated temperature, sulfates and chlorides on performance of fly Ash and metakaolin-based recycled aggregate geopolymer concrete. J. Building Eng. 99, 111561 (2025)10.1016/j.jobe.2024.111561 ↗
17. Alomayri, T., et al.: Addition of synthetic steel fibers for enhancing the mechanical behavior of fly Ash-Based geopolymer composites. Iran. J. Sci. Technol. Trans. Civil Eng. 49(3), 2679–2691 (2025)10.1007/s40996-025-01825-2 ↗
18. Pasupathy, K., et al.: Durability of low–calcium fly Ash based geopolymer concrete culvert in a saline environment. Cem. Concr. Res. 100, 297–310 (2017)10.1016/j.cemconres.2017.07.010 ↗
19. Yaşın, S., Ahlatcı, H.: Thermal investigation of fine alumina powder reinforced Na-metakaolin-based geopolymer binder for refractory applications. J. Aust. Ceram. Soc. 55(2), 587–593 (2019)10.1007/s41779-018-0266-4 ↗
20. Nematollahi, B., Sanjayan, J., Shaikh, F.: Strain hardening behavior of engineered geopolymer composites: Effects of the activator combination. J. Aust. Ceram. Soc. 51(1), 54–60 (2015)
21. El Ouni, M.H., et al.: Enhancement of mechanical and toughness properties of carbon fiber-reinforced geopolymer pastes comprising nano calcium oxide. J. Aust. Ceram. Soc., : pp. 1–13. (2022)10.1007/s41779-022-00764-9 ↗
22. Palomo, A., Grutzeck, M., Blanco, M.: Alkali-activated fly ashes: A cement for the future. Cem. Concr. Res. 29(8), 1323–1329 (1999)10.1016/S0008-8846(98)00243-9 ↗
23. Davidovits, J.: Geopolymers and geopolymeric materials. J. Therm. Anal. 35, 429–441 (1989)10.1007/BF01904446 ↗
24. Puertas, F., et al.: A model for the CASH gel formed in alkali-activated slag cements. J. Eur. Ceram. Soc. 31(12), 2043–2056 (2011)10.1016/j.jeurceramsoc.2011.04.036 ↗
25. Myers, R.J., et al.: Generalized structural description of calcium–sodium aluminosilicate hydrate gels: The cross-linked substituted tobermorite model. Langmuir. 29(17), 5294–5306 (2013)10.1021/la4000473 ↗
26. Samarakoon, M., et al.: Recent advances in alkaline cement binders: A review. J. Clean. Prod. 227, 70–87 (2019)10.1016/j.jclepro.2019.04.103 ↗
27. Rathnayaka, M., et al.: Machine learning approaches to predict compressive strength of fly ash-based geopolymer concrete: A comprehensive review. Constr. Build. Mater. 419, 135519 (2024)10.1016/j.conbuildmat.2024.135519 ↗
28. Gómez-Casero, M., et al.: Physical, mechanical and thermal properties of metakaolin-fly Ash geopolymers. Sustainable Chem. Pharm. 26, 100620 (2022)10.1016/j.scp.2022.100620 ↗
29. John, S.K., Nadir, Y., Girija, K.: Effect of source materials, additives on the mechanical properties and durability of fly Ash and fly Ash-slag geopolymer mortar: A review. Constr. Build. Mater. 280, 122443 (2021)10.1016/j.conbuildmat.2021.122443 ↗
30. Sawarkar, P.G., Pote, A., Murmu, A.L.: Properties of blast furnace slag geopolymer concrete. Materials Today: Proceedings, (2023)10.1016/j.matpr.2023.03.179 ↗
31. Marvila, M.T., et al.: Activated alkali cement based on blast furnace slag: Effect of curing type and concentration of Na20. J. Mater. Res. Technol. 23, 4551–4565 (2023)10.1016/j.jmrt.2023.02.088 ↗
32. Wu, H., et al.: Cementitious properties of sustainable alkali-activated materials with ground GGBS-based geopolymer waste powder as recycled precursor. J. Building Eng. 88, 109210 (2024)10.1016/j.jobe.2024.109210 ↗
33. García-Díaz, A., et al.: Effect of the incorporation of spent diatomaceous earths on the properties of alkaline activation cements based on sewage sludge Ash. Archives Civil Mech. Eng. 24(2), 62 (2024)10.1007/s43452-024-00873-1 ↗
34. Lv, Y., et al.: Performance of ultra-high-performance concrete incorporating municipal solid waste incineration fly Ash. Case Stud. Constr. Mater. 17, e01155 (2022)
35. Zhan, X., et al.: Enhanced mechanical properties and mechanism of iron ore tailings-based geopolymers modified by municipal solid waste incineration fly Ash. J. Building Eng. 98, 111456 (2024)10.1016/j.jobe.2024.111456 ↗
36. Chu, H., et al.: Assessing the performance and sustainability of ecological mortar with municipal solid waste incineration fly Ash solidified by sulphoaluminate cement. Constr. Build. Mater. 450, 138613 (2024)10.1016/j.conbuildmat.2024.138613 ↗
37. Huang, X., et al.: Mechanical properties and enhancement mechanism of iron ore tailings as aggregate for manufacturing ultra-high performance geopolymer concrete. Constr. Build. Mater. 439, 137362 (2024)10.1016/j.conbuildmat.2024.137362 ↗
38. Zhou, T., Li, J.: Effect of lime neutralization wastewater on the performance of alkali-activated slag/fly Ash mortars. Mater. Struct. 57(9), 1–11 (2024)10.1617/s11527-024-02494-9 ↗
39. Turner, L.K., Collins, F.G.: Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete. Constr. Build. Mater. 43, 125–130 (2013)10.1016/j.conbuildmat.2013.01.023 ↗
40. Torres-Carrasco, M., Palomo, J., Puertas, F.: Sodium silicate solutions from dissolution of glasswastes. Stat. Anal. Materiales De Construcción. 64(314), e014–e014 (2014)10.3989/mc.2014.05213 ↗
41. Puertas, F., Torres-Carrasco, M.: Use of glass waste as an activator in the Preparation of alkali-activated slag. Mechanical strength and paste characterisation. Cem. Concr. Res. 57, 95–104 (2014)10.1016/j.cemconres.2013.12.005 ↗
42. Torres-Carrasco, M., Puertas, F.: Waste glass in the geopolymer preparation. Mechanical and microstructural characterisation. J. Clean. Prod. 90, 397–408 (2015)10.1016/j.jclepro.2014.11.074 ↗
43. Pode, R.: Potential applications of rice husk Ash waste from rice husk biomass power plant. Renew. Sustain. Energy Rev. 53, 1468–1485 (2016)10.1016/j.rser.2015.09.051 ↗
44. Wu, H., et al.: Effects of binder component and curing regime on compressive strength, capillary water absorption, shrinkage and pore structure of geopolymer mortars. Constr. Build. Mater. 442, 137707 (2024)10.1016/j.conbuildmat.2024.137707 ↗
45. Yip, C.K., et al.: Effect of calcium silicate sources on geopolymerisation. Cem. Concr. Res. 38(4), 554–564 (2008)10.1016/j.cemconres.2007.11.001 ↗
46. Niklioć, I., et al.: Modification of mechanical and thermal properties of fly ash-based geopolymer by the incorporation of steel slag. Mater. Lett. 176, 301–305 (2016)10.1016/j.matlet.2016.04.121 ↗
47. Temuujin, J., Van Riessen, A., Williams, R.: Influence of calcium compounds on the mechanical properties of fly Ash geopolymer pastes. J. Hazard. Mater. 167(1–3), 82–88 (2009)10.1016/j.jhazmat.2008.12.121 ↗
48. Dombrowski, K., Buchwald, A., Weil, M.: The influence of calcium content on the structure and thermal performance of fly Ash based geopolymers. J. Mater. Sci. 42, 3033–3043 (2007)10.1007/s10853-006-0532-7 ↗
49. Kareem, Z., Yaşın, S.: Synthesis and characterisation of heat-cured hydrosodalite-based geopolymer and influence of Metakaolin and glass powder additions. J. Aust. Ceram. Soc., : pp. 1–10. (2025)10.1007/s41779-025-01297-7 ↗
50. Yavuz, D.: Incorporation of eggshell powder in metakaolin-based geopolymer concrete exposed to elevated temperatures. J. Aust. Ceram. Soc., : pp. 1–13. (2025)10.1007/s41779-025-01248-2 ↗
51. Ponomar, V., et al.: An overview of the utilisation of Fe-rich residues in alkali-activated binders: Mechanical properties and state of iron. J. Clean. Prod. 330, 129900 (2022)10.1016/j.jclepro.2021.129900 ↗
52. Cornell, R.M., Schwertmann, U.: The Iron Oxides: structure, properties, reactions, occurrences, and Uses, vol. 664. Wiley-vch Weinheim (2003)10.1002/3527602097 ↗
53. Weng, L., et al.: Effects of aluminates on the formation of geopolymers. Mater. Sci. Engineering: B. 117(2), 163–168 (2005)10.1016/j.mseb.2004.11.008 ↗
54. Piatak, N.M., Parsons, M.B., Seal, R.R.: Characteristics and environmental aspects of slag: A review. Appl. Geochem. 57, 236–266 (2015)10.1016/j.apgeochem.2014.04.009 ↗
55. Simon, S., et al.: The fate of iron during the alkali-activation of synthetic (CaO‐) FeOx‐SiO2 slags: An Fe K‐edge XANES study. J. Am. Ceram. Soc. 101(5), 2107–2118 (2018)10.1111/jace.15354 ↗
56. Puertas, F., et al.: Alkali-activated fly ash/slag cements: Strength behaviour and hydration products. Cem. Concr. Res. 30(10), 1625–1632 (2000)10.1016/S0008-8846(00)00298-2 ↗
57. Ravikumar, D., Neithalath, N.: Effects of activator characteristics on the reaction product formation in slag binders activated using alkali silicate powder and NaOH. Cem. Concr. Compos. 34(7), 809–818 (2012)10.1016/j.cemconcomp.2012.03.006 ↗
58. Criado, M., et al.: Effect of the SiO2/Na2O ratio on the alkali activation of fly ash. Part II: 29Si MAS-NMR survey. Microporous Mesoporous Mater. 109(1–3), 525–534 (2008)10.1016/j.micromeso.2007.05.062 ↗
59. Fernández Carrasco, L., Fernández-Giménez, A., Palomo, A.: Alkali activation of Pozzolan-calcium aluminate cement mixtures. in 12th International Congress on the Chemistry of Cements. -. (2007)
60. Caijun, S., Yinyu, L.: Investigation on some factors affecting the characteristics of alkali-phosphorus slag cement. Cem. Concr. Res. 19(4), 527–533 (1989)10.1016/0008-8846(89)90004-5 ↗
61. Reig, L., et al.: Properties and microstructure of alkali-activated red clay brick waste. Constr. Build. Mater. 43, 98–106 (2013)10.1016/j.conbuildmat.2013.01.031 ↗
62. Gado, R., et al.: Alkali activation of waste clay bricks: Influence of the silica modulus, SiO2/Na2O, H2O/Na2O molar ratio, and liquid/solid ratio. Materials. 13(2), 383 (2020)10.3390/ma13020383 ↗
63. Yip, C.K., Lukey, G., Van Deventer, J.S.: The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation. Cem. Concr. Res. 35(9), 1688–1697 (2005)10.1016/j.cemconres.2004.10.042 ↗
64. Ouyang, X., et al.: Effect of the sodium silicate modulus and slag content on fresh and hardened properties of alkali-activated fly ash/slag. Minerals. 10(1), 15 (2019)10.3390/min10010015 ↗
65. Singh, J., Singh, S.: Development of alkali-activated cementitious material using copper slag. Constr. Build. Mater. 211, 73–79 (2019)10.1016/j.conbuildmat.2019.03.233 ↗
66. Ye, T., et al.: Geopolymers made of recycled brick and concrete powder–A critical review. Constr. Build. Mater. 330, 127232 (2022)10.1016/j.conbuildmat.2022.127232 ↗
67. Apithanyasai, S., Supakata, N., Papong, S.: The potential of industrial waste: Using foundry sand with fly Ash and electric Arc furnace slag for geopolymer brick production. Heliyon, 6(3). (2020)10.1016/j.heliyon.2020.e03697 ↗
68. Zheng, L., Wang, W., Shi, Y.: The effects of alkaline dosage and Si/Al ratio on the immobilization of heavy metals in municipal solid waste incineration fly ash-based geopolymer. Chemosphere. 79(6), 665–671 (2010)10.1016/j.chemosphere.2010.02.018 ↗
69. Rüscher, C.H., et al.: Weakening of alkali-activated Metakaolin during aging investigated by the molybdate method and infrared absorption spectroscopy. J. Am. Ceram. Soc. 93(9), 2585–2590 (2010)10.1111/j.1551-2916.2010.03773.x ↗
70. Nikolić, I., et al.: Alkali activated slag cement doped with Zn-rich electric Arc furnace dust. J. Mater. Res. Technol. 9(6), 12783–12794 (2020)10.1016/j.jmrt.2020.09.024 ↗
71. Ozturk, M., et al.: Alkali activation of electric Arc furnace slag: Mechanical properties and micro analyzes. J. Building Eng. 21, 97–105 (2019)10.1016/j.jobe.2018.10.005 ↗
72. Rashad, A.M., Khafaga, S.A., Gharieb, M.: Valorization of fly Ash as an additive for electric Arc furnace slag geopolymer cement. Constr. Build. Mater. 294, 123570 (2021)10.1016/j.conbuildmat.2021.123570 ↗
73. Shobeiri, F.Z., Moosavi, A.: Evaluation of properties of chamotte particle-reinforced geopolymer composites in high-temperature applications. J. Aust. Ceram. Soc. 60(3), 701–711 (2024)10.1007/s41779-023-00978-5 ↗
74. Kittisayarm, P., et al.: Effective function of activated Bagasse Ash for high early strength geopolymer. J. Aust. Ceram. Soc. 60(4), 1071–1083 (2024)10.1007/s41779-024-01008-8 ↗
75. Mostafa, S.A., et al.: Development and characterization of eco-friendly geopolymer light weight bricks reinforced with nano waste materials for radiation protection applications. J. Aust. Ceram. Soc., : pp. 1–15. (2025)10.1007/s41779-025-01282-0 ↗
76. El Fadili, H., et al.: Comprehensive review on alkaline dissolution of aluminosilicates and its role in the mechanisms and properties of geopolymers and alkali-activated materials. Case Stud. Constr. Mater., : p. e05330. (2025)10.1016/j.cscm.2025.e05330 ↗
77. Su, P., et al.: Preparation and application of alkali-activated cementitious materials in solidification/stabilization of chromite ore processing residue. RSC Adv. 14(28), 19912–19921 (2024)10.1039/D4RA01270D ↗
78. Gebregziabiher, B.S., Thomas, R., Peethamparan, S.: Very early-age reaction kinetics and microstructural development in alkali-activated slag. Cem. Concr. Compos. 55, 91–102 (2015)10.1016/j.cemconcomp.2014.09.001 ↗
79. Moeini, M.A., et al.: Feasibility of alkali-activated slag paste as injection material for rehabilitation of concrete structures. J. Mater. Civ. Eng. 30(10), 04018252 (2018)10.1061/(ASCE)MT.1943-5533.0002400 ↗
80. Rashad, A.M., Essa, G.M.: Effect of ceramic waste powder on alkali-activated slag pastes cured in hot weather after exposure to elevated temperature. Cem. Concr. Compos. 111, 103617 (2020)10.1016/j.cemconcomp.2020.103617 ↗
81. Zhu, Z., et al.: Correlations between unconfined compressive strength, sorptivity and pore structures for geopolymer based on SEM and MIP measurements. J. Building Eng. 67, 106011 (2023)10.1016/j.jobe.2023.106011 ↗
82. Karataş, M., Benli, A., Ergin, A.: Influence of ground pumice powder on the mechanical properties and durability of self-compacting mortars. Constr. Build. Mater. 150, 467–479 (2017)10.1016/j.conbuildmat.2017.05.220 ↗
83. Mast, B., et al.: The effect of high dose rate gamma irradiation on the curing of CaO-FexOy-SiO2 slag based inorganic polymers: Mechanical and microstructural analysis. J. Nucl. Mater. 539, 152237 (2020)10.1016/j.jnucmat.2020.152237 ↗
84. Burciaga-Díaz, O., Escalante-García, J.: Structural transition to well-ordered phases of NaOH-activated slag-metakaolin cements aged by 6 years. Cem. Concr. Res. 156, 106791 (2022)10.1016/j.cemconres.2022.106791 ↗
85. He, P.Y., et al.: Development of an eco-efficient CaMoO4/electroconductive geopolymer composite for recycling Silicomanganese slag and degradation of dye wastewater. J. Clean. Prod. 208, 1476–1487 (2019)10.1016/j.jclepro.2018.10.176 ↗
86. Mitchell, L., Margeson, J., Beaudoin, J.: Synthesis and characterisation of lithium and sodium doped C–S–H. in 12th International congress on the chemistry of cement, Montreal. (2007)
87. Palomo, A., et al.: OPC-fly Ash cementitious systems: Study of gel binders produced during alkaline hydration. J. Mater. Sci. 42, 2958–2966 (2007)10.1007/s10853-006-0585-7 ↗
88. Fernández-Jiménez, A., et al.: Structure of calcium silicate hydrates formed in alkaline‐activated slag: Influence of the type of alkaline activator. J. Am. Ceram. Soc. 86(8), 1389–1394 (2003)10.1111/j.1151-2916.2003.tb03481.x ↗
89. Ismail, I., et al.: Modification of phase evolution in alkali-activated blast furnace slag by the incorporation of fly Ash. Cem. Concr. Compos. 45, 125–135 (2014)10.1016/j.cemconcomp.2013.09.006 ↗
90. Kalinkina, E.V., et al.: Sorption of atmospheric carbon dioxide and structural changes of Ca and Mg silicate minerals during grinding: I. Diopside. Int. J. Miner. Process. 61(4), 273–288 (2001)10.1016/S0301-7516(00)00035-1 ↗
91. Ghorbani, S., et al.: Characterisation of alkali-activated stainless steel slag and blast-furnace slag cements. Cem. Concr. Compos. 143, 105230 (2023)10.1016/j.cemconcomp.2023.105230 ↗
92. Addadi, L., Raz, S., Weiner, S.: Taking advantage of disorder: Amorphous calcium carbonate and its roles in biomineralization. Adv. Mater. 15(12), 959–970 (2003)10.1002/adma.200300381 ↗
93. Fine, G., Stolper, E.: Dissolved carbon dioxide in basaltic glasses: Concentrations and speciation. Earth Planet. Sci. Lett. 76(3–4), 263–278 (1986)10.1016/0012-821X(86)90078-6 ↗
94. Rivera, J.F., et al.: Synthesis of alkaline cements based on fly Ash and metallurgic slag: Optimisation of the SiO2/Al2O3 and Na2O/SiO2 molar ratios using the response surface methodology. Constr. Build. Mater. 213, 424–433 (2019)10.1016/j.conbuildmat.2019.04.097 ↗
95. García-Lodeiro, I., et al.: FTIR study of the sol–gel synthesis of cementitious gels: C–S–H and N–A–S–H. J. Solgel Sci. Technol. 45, 63–72 (2008)10.1007/s10971-007-1643-6 ↗
96. Lodeiro, I.G., et al.: Effect of alkalis on fresh C–S–H gels. FTIR analysis. Cem. Concr. Res. 39(3), 147–153 (2009)10.1016/j.cemconres.2009.01.003 ↗
97. Yu, P., et al.: Structure of calcium silicate hydrate (C-S‐H): Near‐, Mid‐, and Far‐infrared spectroscopy. J. Am. Ceram. Soc. 82(3), 742–748 (1999)10.1111/j.1151-2916.1999.tb01826.x ↗
98. Fernández-Jiménez, A., Palomo, A.: Mid-infrared spectroscopic studies of alkali-activated fly Ash structure. Microporous Mesoporous Mater. 86(1–3), 207–214 (2005)10.1016/j.micromeso.2005.05.057 ↗
99. Criado, M., Fernández-Jiménez, A., Palomo, A.: Alkali activation of fly ash: Effect of the SiO2/Na2O ratio: Part I: FTIR study. Microporous Mesoporous Mater. 106(1–3), 180–191 (2007)10.1016/j.micromeso.2007.02.055 ↗